The battery's State of Health (SOH) is a critical parameter in the process of battery use, as it represents the Remaining Useful Life (RUL) of the battery. Electrochemical Impedance Spectroscopy (EIS) is a widely used technique in observing the state of the battery. The measured impedance at certain frequencies can be used to evaluate the state of the battery, as it is intimately tied to the underlying chemical reactions. In this work, a low-cost portable EIS instrument is developed on the basis of the ARM Cortex-M4 Microcontroller Unit (MCU) for measuring the impedance spectrum of Li-ion battery packs. The MCU uses a built-in DAC module to generate the sinusoidal sweep perturbation signal. Moreover, it performs the dual-channel acquisition of voltage and current signals, calculates impedance using a Digital Lock-in Amplifier (DLA), and transmits the result to a PC. By using LabVIEW, an interface was developed with the real-time display of the EIS information. The developed instrument was suitable for measuring the impedance spectrum of the battery pack up to 1000 V. The measurement frequency range of the instrument was from 1 hz to 1 Khz. Then, to prove the performance of the developed system, the impedance of a Samsung SM3 battery pack and a Bexel pouch module were measured and compared with those obtained by the commercial instrument.
This study demonstrates formation behavior and morphological changes of PEO (Plasma Electrolytic Oxidation) films on AZ91 Mg alloy as a function of pre-treatment time in 1 M HF solution at 25 ± 1 ℃. The electrochemical behavior and morphological changes of AZ91 Mg alloy in the pre-treatment solution were also investigated with pre-treatment time. The PEO films were formed on the pre-treated AZ91 Mg alloy specimen by the application of anodic current 100 mA/cm2 of 300 Hz AC in 0.1 M NaOH + 0.4 M Na2SiO3 solution. Vigorous generation of hydrogen bubbles were observed upon immersion in the pre-treatment solution and its generation rate decreased with immersion time. It was also found that 𝛽-Mg17Al12 in AZ91 Mg alloy was dissolved and a protective thin film of MgF2 was formed on the AZ91 Mg alloy surface during the pre-treatment process in the 1 M HF solution. PEO film did not grow on the AZ91 Mg alloy specimen when the surface was not pre-treated and irregular PEO films with nodular defects were formed for the specimens pre-treated up to 1 min. Uniform PEO films were formed when the AZ91 Mg alloy specimen was pre-treated more than 3 min. The growth rate of PEO films on AZ91 Mg alloy increased significantly with increasing pre-treatment time.
Steady-state visual evoked potential-based brain-computer interface (SSVEP-BCI) is one of the promising systems that can serve as an alternative input device due to its stable and fast performance. However, one of the major bottlenecks is that some individuals exhibit no or very low SSVEP responses to flickering stimulation, known as SSVEP illiteracy, resulting in low performance on SSVEP-BCIs. However, a lengthy duration is required to enhance multiple SSVEP responses using traditional single-frequency transcranial alternating current stimulation (tACS). This research proposes a novel approach using dual-frequency tACS (df-tACS) to potentially enhance SSVEP by targeting the two frequencies with the lowest signal-to-noise ratio (SNR) for each participant. Seven participants (five males, average age: 24.42) were exposed to flickering checkerboard stimuli at six frequencies to determine the weakest SNR frequencies. These frequencies were then simultaneously stimulated using df-tACS for 20 minutes, and the experiment was repeated to evaluate changes in SSVEP responses. The results showed that df-tACS effectively enhances the SNR at each targeted frequency, suggesting it can selectively improve target frequency responses. The study supports df-tACS as a more efficient solution for SSVEP illiteracy, proposing further exploration into multi-frequency tACS that could stimulate more than two frequencies, thereby expanding the potential of SSVEP-BCIs.
국내 접지방식은 2021년부터 IEC 60364에서 제시하는 접지방식을 새롭게 채택하고 있다. 이 접지방식은 인체접촉사고 발생 시, 접촉전압과 통과전류에 대한 특성이 다양하게 나타날 수 있어, 인체에 대한 안전성 평가가 구체적으로 요구되고 있다. 또한, 한국전기안전공사나 대한전기협회에서 IEC 60364의 접지방식에 대한 안전기술 교육을 부분적으로 수행하고 있지만, 안전성을 평가할 수 있는 시험장치가 미흡하여, 전기안전관리자에 대한 교육이 어려운 실정이다. 따라서, 본 논문에서는 IEC 60364의 접지방식별 안전성 평가를 수행할 수 있는 시험장치를 모델링하고, 이를 바탕으로 시험장치를 구현한다. 즉, 전력계통 상용해석 프로그램인 PSCAD/EMTDC를 이용하여, 계통 전원부, 접지방식별 시험장치부, 보조장치부로 구성된 안전성 평가 시험장치의 모델링을 제시하고, 계통전원부, TT접지방식 시험장치부, TN-S접지방식 시험장치부, 모니터링부로 구성된 안전성 평가 시험장치를 구현한다. 상기의 모델링과 시험장치를 이용하여, TT접지방식과 TN-S접지방식의 인체 안전성 특성을 분석한 결과, TT접지방식의 경우 고장점 임피던스가 0[Ω], 10[Ω], 100[Ω]에서 인체 통과전류는 각각 104[mA], 87.4[mA], 35.5[mA]가 산정되었고, TN-S접지방식의 경우 54.9[mA], 4.1[mA], 0.4[mA]가 산정됨에 따라, TN-S접지방식이 TT접지방식에 비하여 감전에 대한 보호가 우수함을 알 수 있고, 저압수용가에서 사용 중인 TT 접지방식에서 TN-S 접지방식으로 전환하면 감전에 대한 보호성능을 향상시킬 수 있음을 알 수 있었다.
본 논문에서는 Ballard사의 1.2[kW]급 연료전지와 연료전지의 저전압($28{\sim}43[VDC]$)을 승압(380([VDC])시키기 위한 풀-브리지 직류-직류 컨버터, 그리고 승압된 직류 링크전압을 교류 전압(220[VAC]), 60[Hz]으로 변환하기 위한 단상 풀-브리지 인버터로 구성된 연료전지 발전용 전력변환시스템 중 풀-브리지 고주파 절연형 영전압 영전류 스위칭 위상 천이 펄스폭 변조 직류-직류 컨버터를 제안하였다. 제안한 풀-브리지 고주파 절연형 영전압 영전류 스위칭 위상 천이 펄스폭 변조 직류-직류는 프리휠링 다이오드를 포함한 탭부 인덕터 필터를 이용하여 순환 전류를 저감시켰으며, 스위치 및 변압기의 턴-온, 턴-오프시에 오버슈트 전압이나 과도현상이 발생하지 않는다. 그리고 넓은 출력 전압 조정에도 효율을 $93{\sim}97[%]$정도 얻을 수 있으며, 출력 부하전류의 변화에 대해 거의 일정한 출력 전압 특성을 가졌다.
연자기 특성이 우수한 것으로 잘 알려진 Fe-6.5 % Si 합금을 분말로 제작하여 성형한 Fe-6.5 % Si 압분코어에서도 좋은 특성을 얻을 수 있는 지를 확인하기 위해 Fe-3, 4.2 그리고 6.8 % Si 압분코어를 각각 제작하여 교류와 직류 자기특성, 미소경도 등을 분석하였다. 실리콘 함량이 증가할수록 와전류손실은 감소하나 이력손실은 증가하여 Fe-6.8 % Si에서 최소손실을 얻을 수 없었다. 또한 실리콘함량이 증가할수록 코어의 전기비저항과 분말입자의 미소경도는 지속적으로 증가하였으며 이 때문에 충진율은 감소하였다. B2와 $DO_3$상이 Fe-6.8 % Si 분말에서만 생성된 것을 확인할 수 있었으며, 6.8 % Si보다 낮은 실리콘 함량에서 코어손실이 더 낮은 것을 절연체와 분말입자의 비저항 비율, 미소경도변화에 따른 충진율 저하와 반자장 효과 등으로 설명할 수 있었다.
The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.
연료전지 발전시스템은 수소와 산소의 반응 작용에 의해 직접 전기를 발생하는 스택(Stack) 이외에 메탄올, 천연가스 등 각종 연료로부터 수소를 만들어 내는 개질기와 스택에서 발전된 직류전압을 안정된 교류전압으로 변환시켜주는 전력변환기 등으로 구성되어진다. 이러한 시스템의 연료전지 출력은 직류로 가정에서 사용하기 위해서는 전력변환장치를 통하여 교류로 변환시키는 인버터 장치가 필요하다. 또한 연료전지 전압이 30-70V 정도로 이를 인버터 동작 전압인 380V 정도로 승압하기 위하여 DC-DC 승압형 컨버터를 사용한다. DC-DC 승압형 컨버터는 연료전지 출력과 인버터 사이에 존재하는 직류전압 가변장치로 연료전지 출력전압의 변동에 반응하여 컨버터의 일정 출력전압을 만들어 내므로 인버터는 연료전지의 전압 변동에 무관하게 일정한 전원을 공급 받을 수 있다. 따라서 본 논문에서는 연료전지발전 시스템의 구성 원 중 연료전지 출력전압(30-70V)을 입력으로 받아 계통연계에 적용되는 인버터의 주요 전원인 풀 브리지(Full-Bridge) 컨버터의 하드웨어 세부설계에 대하여 논하고자 한다.
본 연구는 수삼에서 추출된 사포닌 성분 특성 및 이를 혼합한 포크소시지의 소비자 기호성에 미치는 영향을 구명하기 위해 실시되었다. 최적의 수삼사포닌 추출을 위해 에탄올 농도(0, 20, 40, 60, 80, 100%)에 따른 고형분 추출성과 사포닌 함량을 조사한 결과 에탄을 0%(증류수 100%) 추출이 20%로 $20{\sim}80%$(약 15%)와 100%(10%)에탄을 추출보다 더 많은 건조물을 추출하였으나, 조사포닌 함량은 에탄을 함량이 증가와 비례적으로 증가하여 100% 에탄을 추출에서 123.52mg/g으로 가장 높았다. LC/MS로 ginsenosides을 정량한 결과 Rb1, Rb2 및 Rc는 에탄을 80%와 100%에서 공동으로 다른 농도에 비해 유의적(p<0.05)으로 높은 농도를 보였고, Rgl은 60, 80 및 100% 에탄올에서 유의적(p<0.05)으로 높은 추출성을 보였다. 에탈올 100%로 추출한 수삼추출액을 포크소시지에 원료육 중량에 대한 0, 1, 2% 함량으로 각각 첨가하여 훈연과 비훈연 처리로 나누어 소시지 제조 후 향미, 다즙성, 연도, 기호성 등을 펙토리얼 디자인에 의한 관능평가를 실시하였다. 훈연 처리는 다즙성과 연도를 유의적(p<0.05)으로 감소시켰으나 향미와 기호성은 유의적(p<0.05)으로 증가시켰다. 특히 인삼 추출물을 2% 첨가한 소시지는 훈연에 의해서도 다즙성이나 연도가 감소하지 않은(p<0.05) 반면 기호성은 다른 처리군에 비해 유의적(p<0.05)으로 높은 관능검사 점수를 받았다. 이상의 결과는 포크소시지 제조에 인삼 추출물 첨가는 인삼 본래의 기능적 효과를 소비자들에게 제공함은 물론 관능적 특성에서도 더 우수한 제품을 생산할 수 있다는 점을 예시하고 있다. 유의적으로 높게 나타났으며(p<0.05), 연도와 다즙성 및 전체적인 기호도는 처리구가 다소 높은 점수를 얻었다.m$1.0%에 비하여 3일과 5일은 11.0$\pm$0.9%와 8.0$\pm$0.9%로 유의적으로(p<0.05) 낮은 발달율을 나타내었다. 이상의 결과를 종합할 때 항생제가 첨가되지 않은 돼지 혼합 정액은 보관일수 3일째부터 정자의 운동성이 감소하고 세균수는 증가하였다. 또한 보존된 정액을 이용하여 체외 수정을 실시할 경우, 보관일수가 증가할수록 정상 수정율과 체외 발달율이 감소함으로 항생제를 첨가하지 않는 경우 3일 이상 정액을 보관하여 사용하지 않는 것이 바람직 하다고 사료된다. 특성을 유지하였으며 냉각 보관 2주까지 좋은 성적의 정자 특성을 나타냈다. 개 정자 냉각 보존에 대안적인 희석액으로 G-BSA도 사용 가능한 것으로 사료된다.수준이 증가함에 따라 계란 내 항생제 잔류량은 유의하게 감소하였다. 본 연구에서는 육계 사료 내 AC의 첨가 급여가 생산된 계육의 외관적 특성을 개선시키는 효과가 시사되었고, 장내 총균수, 대장균 및 유산균수를 감소시키는 시키는 결과를 보였다. 산란계 사료 내 AC의 첨가 급여가 혈청 및 계란 내 항생제 잔류를 감소시키는 결과를 나타내었다.m의 MIC는 ceftazidime의 MIC에 비해서 상대적으로 높은 양상을 보였다. 이러한 결과는 국내의 대학병원 뿐 만 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필요한 것으로 생각한다., A2-1, B1-1, B2-1의
Park, Da-Hee;Kwon, Kyoung-Woo;Park, Chan-Rok;Choi, Yoo-Jin;Bae, Seung-Muk;Baek, Senug-Hyub;Kim, Jin-Sang;Hwang, Jin-Ha
한국진공학회:학술대회논문집
/
한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
/
pp.188.2-188.2
/
2015
The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.