• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 춘계학술발표대회논문집
• /
• pp.362-365
• /
• 2003

본 논문은 DCT기반에서 AC 및 DC 성분에 워터마크를 삽입하는 워터마킹 방법을 제안하였다. DCT는 원영상을 8×8 블록으로 나누어서 행하였으며, 삽입한 워터마크 데이터는 평균 0, 분산 1, 길이가 1000인 정규분포 랜덤시퀀스를 사용하였다. 이 워터마크 데이터의 크기에 따라 DCT의 DC 및 AC 성분에 삽입한다. 제안한 워터마킹 알고리듬의 성능을 확인하기 위해서 컴퓨터 시뮬레이션을 수행한 결과, 제안 방법이 기존의 워터마크 방법보다 비가시성 및 견고성 면에서 우수함을 확인하였다

• 전자공학회논문지S
• /
• 제35S권8호
• /
• pp.86-95
• /
• 1998

시간 방향 예측을 사용할 수 없는 Intra-프레임 부호화는 Inter-프레임 부호화에 비해 상당히 높은 비트율을 필요로 한다. 이러한 Intra-프레임의 비트율 감축을 위하여 최근 표준화가 진행중인 MPEG-4에서는 DCT영역에서의 화면내 예측 부호화 방식에 관한 연구를 진행해 왔다. 본 논문에서는 기존 방식들에 비해 약간의 복잡도가 추가된 DCT 영역에서의 화면내 예측 부호화 방식들을 제안한다. 제안 방식은 DC 계수 예측 방식과 2가지의 AC 계수 예측 방식들로 구성된다. DC 계수 예측 방식으로는, 이웃 블록들의 DC 계수간 기 울기를 이용하여 부가 정보없이 선택적으로 예측 방향을 결정하는 방식을 제안한다. AC 계수 예측 방식으로는, 현재 블록의 DC 계수를 고려하여 MPEG-4의 AC 계수 예측 방향을 개선한 방식을 제안하며, 또한, AC 계수 단위로 예측 여부를 결정하는 방식을 제안한다. 실험을 통하여 제안 방식에 의해 상당한 비트율 감축을 얻을 수 있음을 보인다.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.104-109
• /
• 2014

To operate organic light emitting device (OLED) with alternating current (AC) power source without AC/DC(direct current) converter, we fabricated the fluorescent OLED and measured the emission characteristics with AC and DC. The OLED operated by AC showed higher maximum current efficiency of 8.2 cd/A and maximum power efficiency of 8.3 lm/W. But current efficiency and power efficiency of AC driven OLED showed worse than DC driven OLED at high voltage above 10 V. This result can be explained by the peak voltage of AC was $\sqrt{2}$ times than DC, In case of low driving voltage the emission characteristics were improved by the peak voltage of AC, but in case of high driving voltage the emission efficiencies were decreased by the roll off phenomena. Finally, serial OLED arrays using twelve OLEDs driven by AC 110 V showed average voltage of 9.17 V, voltage uniformity of 99.0%, average luminance of $1,175cd/m^2$, luminance uniformity of 94.4%.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.169-173
• /
• 2001

In this paper, dc link ripple currents for three-phase ac/dc/ac PWM converters are ana lysed in a frequency domain. The expression of the harmonic currents is developed by using switching functions and exponential Fourier series expansion. The dc link ripple currents with regard to power factor and modulation index are investigated. In addition, the effect of the displacement angle between the switching periods of line-side converters and load-side inverters on the dc link ripple current is studied. The result of the dc link current analysis is helpful in specifying the dc link capacitor size and its lifetime estimation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.196-197
• /
• 2017

최근 국내 태양광산업은 보급량이 증가하고 있고, 정부 정책에서도 에너지신산업을 추진하는 등 시장 활성화에 노력하고 있다. 본교에서는 신재생에너지원 중 태양광발전시스템에 대해 건학이념인 실사구시에 입각한 학부 교육 프로그램을 개발 및 적용하고 있으며 본 논문에서는 이에 대한 내용을 소개한다. 산업체 실무에 기초한 태양광발전시스템 학부 교육 프로그램은 마이크로콘트롤러(MCU) 교육, DC-DC 컨버터와 DC-AC 인버터 등 전력변환장치 기반의 Solar Explorer Kit 교육, 태양광발전시스템 발전량 산출과 손실분석 등 성능평가를 위한 PVsyst 엔지니어링 교육 내용으로 구성된다. 특히, 전력변환장치로 구성된 Solar Explorer Kit 교육 프로그램은 DC-DC 컨버터와 배터리(리튬-폴리머) 충전, 배터리(리튬-폴리머) 방전과 DC LED 부하 접속, 독립형 DC-AC 인버터 출력과 AC 할로겐 램프 부하 접속, 계통연계형 DC-AC 인버터 출력 실습 등에 대해 소개한다.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1152-1162
• /
• 2011

In this paper, a single-phase DC-AC inverter using two embedded Z-source converters is proposed. The proposed inverter is composed of two embedded Z-source converters with common DC source and output AC load. The output AC voltage of the inverter is obtained by the difference of output capacitor voltages of each converter. The output voltage of each converter take shape of the asymmetrical AC waveform centering zero voltage. Therefore, the proposed inverter can generate the same output voltage despite low VA rating L-C elements, compared to the conventional inverter using high DC voltage with AC ripple. To verify the validity of the proposed system, the PSIM simulation was achieved under the condition of rapid increase of DC source (110[V]${\rightarrow}$150[V]) and R-load (50[${\Omega}$]${\rightarrow}$300[${\Omega}$]). For controlling the voltage of the inverter system, the one-cycle controller was adopted. As results, the proposed inverter output the constant AC voltage (220[V]rms/60[Hz]) for all conditions. Also, the R-L load and nonlinear diode load were adopted for the proposed inverter loads, and we could know that the its output voltage characteristics were as good as the pure R-load. Finally, the RMS and THD of output AC voltage were examined for the different loads, input DC voltages and reference voltage signals.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1349-1355
• /
• 2009

This paper is studied on a novel power factor correction (PFC) AC-DC converter of high efficiency by soft switching technique. The input current waveform in the proposed converter is got to be a sinusoidal form composed of many a discontinuous pulse in proportion to the magnitude of a ac input voltage under the constant switching frequency. Therefore, the input power factor is nearly unity and the control method is simple. The proposed converter adding an electric isolation operates with a discontinuous current mode (DCM) of the reactor in order to obtain some merits of simpler control, such as fixed switching frequency, without synchronization control circuit used in continuous current mode (CCM). To achieve the soft switching (ZCS or ZVS) of control devices, the converter is constructed with a new loss-less snubber for a partial resonant circuit. It is that the switching losses are very low and the efficiency of the converter is high, Particularly, the stored energy in a loss-less snubber capacitor recovers into input side and increases input current from a resonant operation. The result is that the input power factor of the proposed converter is higher than that of a conventional PFC converter. This paper deals mainly with the circuit operations, theoretical, simulated and experimental results of the proposed PFC AC-DC converter in comparison with a conventional PFC AC-DC converter.

• 센서학회지
• /
• 제14권5호
• /
• pp.350-356
• /
• 2005

We have developed a dual-channel type automatic measurement system to evaluate AC-DC current transfer difference of the thermal current converter(TCC) which is primary standard of AC current. The output drift effect of the TCC is minimized by measuring simultaneously the output voltages of two TCCs using voltmeter. Furthermore, the offset voltage of the voltmeter is cancelled nearly out by taking the average values of two outputs of TCCs measured with the forward-reverse directions using dual channel scanner. The uncertainties of the automatic system were 7 to $86{\mu}A/A$ for 3 mA to 10 A at 40 Hz to 20 kHz, which were evaluated by the comparisons between adjacent range of TCCs and inter-comparison with national measurement institute of Germany(PTB). The capability for ac-dc transfer difference measurement was improved by one order compared with that for the manual ac-dc measurement system.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1339-1346
• /
• 2024

Electrorefining in molten salts is used for purifying actinides. Optimizing electrorefining is key to minimizing processing time and radiological waste. One possible way of improving electrorefining efficiency is using an AC superimposed DC waveform. This waveform has demonstrated potential benefits in aqueous solutions but has never been utilized in a molten metal, molten salt application. This work investigates the effects of using an AC superimposed DC waveform on molten bismuth electrorefining in a molten LiCl-KCl-CaCl2 eutectic. Bismuth has been identified as a potential surrogate for plutonium electrorefining and a potential cathode in electrorefining used nuclear fuel (UNF). All electrorefining runs resulted in a high purity cathode ring and high yield with exception of the run using a low-frequency, high-amplitude superimposed AC waveform, which experienced some contamination and a lower yield. The other three AC superimposed DC runs experienced an average yield 6.7 % higher than the average yield of the DC runs. The electrorefining run using the high-frequency, high-amplitude superimposed AC signal had the highest yield. It is recommended in future studies to investigate the statistical variability of electrorefining yield and current efficiency and the impact of AC superimposed DC waveforms on solidified bismuth anodes.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.261-268
• /
• 2007

Embedded sensors were used as an in-situcorrosion-sensing device for aircraft and vehicular structures protected by organic coatings. Results are presented changes associated with a standard Airforce aircraft coating and a standard Army vehicle coating were monitored by embedded sensors. These coatings consisted of a polyurethane topcoat and an epoxy primer, however are formulated to provide different characteristics. The ac-dc-ac testing method was used to accelerate the degradation of these coatings while being immersed in a NaCl medium. Electrochemical impedance spectroscopy and electrochemical noise measurement experiments were used to monitor the induced changes. A comparison of the results between coatings subjected to the ac-dc-ac exposure and coatings subjected to only constant immersion in the NaCl medium is presented. The results were used to demonstrate the effectiveness of the ac-dc-ac method at accelerating the degradation of an organic coating without observably changing the normal mechanism of degradation. The data highlights the different features of the coating systems and tracks them while the coating is being degraded. The aircraft coating was characterized by a high-resistant topcoat that can mask corrosion/primer degradation at the primer/substrate interface whereas the vehicle coating was characterized by a low-resistant topcoat with an effective corrosion inhibiting primer. Details of the ac-dc-ac degradation were evaluated by using an equivalent circuit to help interpret the electrochemical impedance data.