• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.992-997
• /
• 2012

This study was conducted to get the basic information for absorb enhancement of accumulated soil nutrients in plastic film house. The grain sorghum (Sorghum bicolor L.) was sowing in plastic film house which soil nutrient accumulated moderately and was cutting at major growth period of sorghum. We were analyzed the regrowth pattern, biomass due to cutting time and amount of plant nutrient of grain sorghum. The obtained results were as follows. The heading date after cutting of sorghum in plastic film house was came to about 35 days. The accumulated of plant height were the longest as 379.4 cm in cutting at milk stage. The total biomass of sorghum in cutting at heading stage was 1.73 ton $10a^{-1}$ in cutting at heading stage. The high grain yields were produced with non-cutting and cutting at 10 leaves stage as 75~113 kg $10a^{-1}$ but the lowest grain yields were the cutting plots at booting stage as below 24 kg $10a^{-1}$. The content of nutrient in sorghum plant was low as progress of growth. The concentrations in aboveground sorghum due to plant parts was in order to leaves > panicle > stalk. The nitrogen content of sorghum was 0.6~0.7% in stalk, 1.5~1.6% in panicle and 1.8~2.3% in leaves. The amount of nutrient absorbed in sorghum was 4.2 kg $10a^{-1}$ in nitrogen, 1.7 kg $10a^{-1}$ phosphorus and 7.7 kg $10a^{-1}$ in potassium and the absorbing different by cutting time in order to booting > non-cutting > panicle formation ${\geq}$ milk ripe > 10 leaves stage.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.197-203
• /
• 2012

Purpose: In this study, we considerate our radiation therapy process for the breast cancer patient implanted a pacemaker applying the machine movement surgery, shielding, beam selection. Materials and Methods: We perform radiation therapy to a 54 years old, breast cancer patient implanted a pacemaker. The patient underwent a surgery to move the position of a pacemaker to right side breast after consultation with cardiology department. Prescribed dose was 5,040 cGy and daily dose 180 cGy for 28 fractions. The 10 MV photon energy, field size 0/$9.5{\times}20$ cm, half beam and opposing portal irradiation are used. To find out appropriate thickness of shielding board, we carried out an experiment using a solid water phantom ($30{\times}30{\times}7$ cm), a Farmer-type chamber (TN30013, PTW, Germany) and a shielding board (Pb $28{\times}27{\times}0.1$ cm). We calculated expected absorbed dose to te pacemaker with absorb ratio and shielding ratio. In the PTP system (Eclipse, Varian, USA), we figured out how much radiation would be absorbed to the machine with and without shielding. First day of the radiation therapy, we measured head scatter to the pacemaker with MOSFET Dose Verification System (TN-RD-70-W, Medical Canada Ltd., Canada). Results: In the phantom measurement, we found out appropriate thickness was 2 mm of shielding board. In the RTP, when using 2 mm shielding the pacemaker will be absorbed 11.5~38.2 cGy and DVH is 77.3 cGy. In the first day of the therapy, 4.3 cGy was measured so 120.4 cGy was calculated during total therapy. The patient was free from any side effects, and the machine also normally functioned. Conclusion: As the report of association which have public confidence became superannuated, there is lack of data about new machine. We believe that radiation therapy to thiese kind of patients could be done successfully with co-operation, patient-suitable planning, accurate QA, frequent in-vivo dosimetry and monitoring.

• The Journal of Art Theory & Practice
• /
• no.4
• /
• pp.77-104
• /
• 2006

The propaganda paintings in oil colors or in forms of posters made from 1949 to 1966 have gone through some changes experiencing the influence of the Soviet Union Art and discussion of nationalization, while putting political messages of the time in the picture planes. The propaganda paintings which have been through this process became an effective means of encouraging the illiterate people in political ideologies, production, and learning. Alike other propaganda paintings in different mediums, the ones which were painted in oil colors and in the form of posters have been produced fundamentally based on Mao Zedong's intensification of the literary art on the talks on literature at Yenan. Yet, the oil paintings and posters were greatly influenced by the socialist realism and propaganda paintings of the Soviet Union, compared to other propaganda paintings in different mediums. Accordingly, they were preponderantly dealt in the discussions of nationalization of the late '50s. To devide in periods, the establishment of People's Republic of China in 1949 as a diverging point, the propaganda paintings made before and after 1949 have differences in subject matters and styles. In the former period, propaganda paintings focused on the political lines of the Communists and enlightenment of the people, but in the latter period, the period of Cultural Revolution, the most important theme was worshiping Mao Zedong. This was caused by reflection of the social atmosphere, and it is shown that the propaganda painters had reacted sensitively to the alteration of politics and the society. On the side of formalities, the oil paintings and posters made before the Cultural Revolution were under a state of unfolding several discussions including nationalization while accepting the Soviet Union styles and contents, and the paintings made afterwards show more of unique characteristics of China. In 1956, the discussion about nationalization which had effected the whole world of art, had strongly influenced the propaganda paintings in oil colors more than anything. There were two major changes in the process of making propaganda paintings in oil colors. One was to portray lives of the Chinese people truthfully, and the other was to absorb the Chinese traditional styles of expression. After this period, the oil painters usually kept these rules in creating their works, and as a result, the subject matters, characters, and backgrounds have been greatly Sinicized. For techniques came the flat colored surface of the new year prints and the traditional Chinese technique of outlining were used for expressing human figures. While the propaganda paintings in oil colors achieved high quality and depth, the posters had a very direct representation of subject matters and the techniques were unskilled compared to the oil paintings. However, after the establishment of People's Republic of China, the posters were used more than any other mediums for propagation of national policy and participation of the political movements, because it was highly effective in delivering the policies and political lines clearly to the Chinese people who were mostly illiterate. The poster painters borrowed techniques and styles from the Soviet Union through books and exhibitions on Soviet Union posters, and this relation of influences constantly appears in the posters made at the time. In this way, like the oil paintings, the posters which have been made with a direct influence of the Soviet Union had developed a new, sinicised process during the course of nationalization. The propaganda paintings in oil colors or in forms of posters, which had undergone the discussion of nationalization, had put roots deep down in the lives of the Chinese people, and this had become another foundation for the amplification of influences of political propaganda paintings in the following period of Cultural Revolution.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.642-650
• /
• 2020

In general, the circulation path of the fluidized particles in a CFB (Circulating Fluidized Bed) boiler is such that the particles entrained from a combustor are collected by a cyclone and recirculated to the combustor via a sealpot which is one of non-mechanical valves. However, when a fluidized bed heat exchanger (FBHE) is installed to additionally absorb heat from the fluidized particles, some particles in the sealpot pass through the FBHE and then flow into the combustor. At this time, in the FBHE operated in the bubbling fluidization regime, if the heat flow is not evenly distributed by poor mixing of the hot particles (800~950 ℃) flowing in from the sealpot, the heat exchanger tubes would be locally heated and then damaged, and the agglomeration of particles could also occur by formation of hot spot. This may affect the stable operation of the circulating fluidized bed. In this study, the unevenness of heat flow arising from structural problems of the FBHE of the domestic D-CFB boiler was found through the operating data analysis and the CPFD (Computational Particle Fluid Dynamics) simulation using Barracuda VR. Actually, the temperature of the heat exchanger tubes in the FBHE showed the closest correlation with the change in particle temperature of the sealpot. It was also found that the non-uniformity of the heat flow was caused by channeling of hot particles flowing in from the sealpot. However, it was difficult to eliminate the non-uniformity even though the fluidizing velocity of the FBHE was increased enough to fluidize hot particles vigorously. When the premixing zone for hot particles flowing in from the sealpot is installed and when the structure is changed through the symmetrization of the FBHE discharge line for particles reflowing into the combustor, the particle mixing and the uniformity of heat flow were found to be increased considerably. Therefore, it could be suggested that the structural modification of the FBHE, related to premixing and symmetric flow of hot particles, is an alternative to reduce the non-uniformity of the heat flow and to minimize the poor particle mixing.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.177-214
• /
• 2016

During more than 20 years of practice, Civil Aviation Law has experienced three times of amendments since it was enacted in 1995. But these revisions are limited to the technical level. The problems and limitations have become increasingly prominent in its implementation. Firstly, the civil aviation law is the result of interests game among several departments and some legal issues was left behind and the regulation was very vague as a result. Secondly, the process of aviation legislation is the process that the country has undergone profound changes and social transformation. The 20 years is long enough for the society to undergo tremendous changes and 1995 version of civil aviation law does not keep pace of development of economy. There was a serious lag between reality and the law. In order to actively promote the development of the aviation industry and overcome implementation issues of the Civil Aviation Law, Civil Aviation Administration of China (CAAC) initiated modification procedure the law and published new draft of Civil Aviation Law in August 2016. The spirit of this modification is to learn and absorb new achievements of domestic and foreign legislation and the International Convention on civil aviation. Furthermore, the purpose of the revision is to provide favorable policy for the development of civil aviation industry and improve aviation safety and supervision, strengthen and protection of consumer rights and interests, to enhance the safety of civil aviation activities, and promote the development of general aviation. This revision concerned to the 78 articles which are revised or deleted and 24 articles added. The highlights of the draft include but not limited to the enhancement of security management, clarification of the main responsibility for production safety. And also it added the provisions related to the construction of effective tracking capability of public air transport enterprises and license system on the transport of dangerous goods. Compared with the existing civil aviation law, the draft has made a great improvements. But there are several deficiencies and limitations in the drafts. These problems need to be supplemented and perfected through further amendments in near future.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.183-203
• /
• 1998

The wave of Avant-garde swept away all in the unique social background so called 'October Revolution' and the early 1900 Russian society which was able to absorb and accept anything. The Russian avant-garde has been affected by the Cubism and the Futurism those had peculiarly appeared in the early twentieth century, spreaded out to three spheres: the Suprematism, the Rayonism and the Constructivism. The Russian Constructivism has appeared in this background, concretely and ideally ex-pressed the ideology of the revolution into the artistic form and made an huge influence to the whole Russian society. The Constructivist like Tatlin, naum Gabo, Pevaner, Rodchenko, Stepanova, Popova and Exter gave great effect on the Soviet Constructive fashion design in 1920's after the Revolution. The Soviet costume in 1920s hold in common the characteristicss of the Constructive graphic as it is, geometrical and abstractive form, energetic and motility. In fashion design, these graphic qualities have been showed as the application of geometrical form and architectural image, physical distortion and transformation. And in textile design, the simple, dynamical presentation has been appeared. We can classify the Soviet costume at this time into three occasions. The first term is from late 1910 th mid 1920, and it is altered from folk costume design to modern one. With Lamanova as the first on the list, using the folk mitif, the Constructive expression of simple form has been gradually revealed in design. Designers like Makarova, Pribylskaia and Mukhina produced the plane, simple chemise style with the decoration of the Russian traditional motif. From early to late 1920 is the second term, and it is at the pick of the most active processing of the Constructive design. Not only at the costume in daily life but also at the theatrical costume and textile, the con-structive design has been represented all avail-able fields. Many Constructivists including Stepanova, Popova, Exter and Rodchenko took part in the textile design and costume design so as to evlvo their aesthetic concept. The third term is from late 1920 to early 1930. The socialistic realism has dominated over the whole culture and art, the revolutionary dynamic motif has been presented also in textile design. The formative features of Soviet Constructive fashion design are; silhouette, from, motif, color and fabric. The first, the silhouette : a straight rectangular silhouetted has been expressed through the whole period and a volumed one with distorted human body shape has introduced in the theatrical costume design. The second, the form: many lengthened rectangular forms have been made at beginnings, but to the middle period, geometrical, architectural forms have been more showed and there are energy and movement in design. At the last period, only a partial feature-division has been seen. The third, the motif; no pattern or ethnic motif has been partly used at beginnings, a figure like circle, tri-angle has gradually appeared in textile design. At latter period, a real-existent motif like an airplane has been represented with graphing and simplicity. The fourth, the color ; because of insufficient dyeing, neutral color like black or grey color has been mainly covered, but after middle term, a primary color or pastel tone has been seen, contrast of the fabric; without much development of textile industry after the Revolution, thick and durable fabrics have been the main stream, but as time had going to the last period, fabrics such as linen, cotton, velvet and silk have been varously choesn. At the theatrical costume, new materials like plastics and metals that were able to accentuate the form. The pursuit of popularity, simplicity and functionalism that the basic concept of Constructive fashion is one of the "beauty" which has been searching in modern fashion. And now we can appreciate how innovative and epochal this Soviet Constructive fashion movement was.ement was.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.26-44
• /
• 2011

The Study was carreid out to see whether the intensity of electromagnetic waves in each floor of a building where the sharing base station has been established is harmful to a human body, and to expect the intensity of the waves in the building. The investigate was performed on both of sharing base station either with many scatterers or without any of them. To satisfy the international standard and the domestic TTA standard, rms for each of the electromagnetic wave of every floor in the building with the station was measured from 3 location of 3 heights(1.1m,1.5m, and 1.7m). Max of the measured rsm from the each of the frequencies in the nine location was confirmed to be 48.12%(the rooftop measured value) at most, compared to the human body protection standard. The value was confirmed to satisfy the human body protection standard for each frequency. And the total value of the calculated exposure indexes for each frequency was determined to be more than 7 times lower at most, which was 0.1445, compared to the 1 standard. Since P value in both of 868MHz and 2.14GHz electromagnetic waves intensity for each base station and floor was less than 0.05, it was revealed to be meaningful, and since R-Sq(adj) value showed a value more than 50%, the regression equation was determined to fully absorb the data information. However, although the P value of both of 868MHz and 2.14GHz electromagnetic waves intensities under the integrating terms of the base station data and the floor data was showed to be less than 0,05, since R-Sq(adj) value of 868MHz electromagnetic waves intensity presented a value smaller than 50%(34.15%), it was determined that the 868MHz electromagnetic waves intensity is very much influenced by an environment with a base station. Because the electromagnetic waves intensity of 2.14GHz show R-Sq(adj) value bigger then 50%(51.8%), The regression equation model of 2.14GHz electromagnetic waves intensity was confirmed to be proper. It also turned out not to be effected by the surrounding environment near a building with the base station and the intensity of electromagnetic waves for each floor of such building was expectable by the regression equation.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.1-34
• /
• 2010

We conduct a comprehensive risk analysis of household debt in Korea for the first time using the whole sample credit bureau (CB) data of 2.2 million individual debtors. After analysing debt service capacity profiles of debtor groups classified by the borrower characteristics such as income, age, occupation, credit scoring, and the type of creditor business companies, we investigate the impact of interest rate and income changes on debt service-to-income ratios (DTIs) and default rates of respective debtor groups. Empirical results indicate that debt service burdens are relatively high for low income wage earners, high income self-employed, low income capital and card loan holders, and high income mutual savings loan holders. We also find that debtors from multiple financial companies are particularly weak in their debt service capacity. The scenario analysis indicates that financial companies, with the current level of capital buffers, may be able to absorb negative consequences arising from the increase in DTIs and loan default rates if the interest rate and income changes remain modest. However, the negative consequences may fall disproportionately on non-bank financial companies such as capital, credit card, and mutual savings banks, whose debtors' DTIs are already high. We also find that the refinancing risk of household debt is relatively high in Korea as more than half of household mortgage debts are bullet loans. As the DTIs of mortgage loan holders are already high, under the current DTI regulation, mortgage loans may not be readily refinanced especially when the interest rate rises. Disruptions in mortgage loan refinancing may put downward pressure on housing prices, which may in turn magnify refinancing risk under the current loan-to-value (LTV) regulation. Overall our analysis suggests that, for more effective monitoring of household debt risk, it is necessary to combine existing surveillance schemes based on macro aggregate indicators with more comprehensive and detailed risk analyses based on micro individual data.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.382-397
• /
• 2016

This study focuses on the lessons and implications of Germany's measures for the social integration after the reunification, and especially the Germany's measure on labor reproduction for the economic stability of East Germany. This analysis indicates, whether South Korea is going to achieve gradual and peaceful reunification or absorb North Korea due to its sudden collapse, that the reunification, in any case, requires the social integration through economic stability of both North and South. In order to ensure national reconciliation, recovery of homogeneity, and establishment of identity for the economically stable social integration, the new integration of educational system is necessary. Especially, the objective of this study is to find the role and direction of vocational education for the stability of the North Korea's labor market and economic life in order to socially integrate South Koreans with its Northern counterparts. First of all, this study examined a priori example of the experiences during West Germany's social integration process, i.e. the vocational education promotion process for the social stability and economic life. It figured out the problem of vocational education for the integrity as well as analyzed the vocational education differences and integration promotion system between East & West Germany. Even though East and West Germany showed their disparities in each vocational education, they corroborated each other by finding one similar system such as bifurcation, which lead to the integration of the labor market and new vocational education policy for the economic stability. Despite the West Germany's support for the socio-economic integration, nevertheless, the East Germany's capacity turned out to be insufficient, which resulted in the failure of the policy. Based on above discussion, this study intended to suggest the efficient solutions of vocational education for the internal reunification of South and North Korea by promoting the independence and self-support of North Koreans and leading the stability of labor market and economic for the future reunification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.39-55
• /
• 1992

In this research, a Three Level Decomposition technique has been developed for configuration design optimization of truss structures. In the first level, as design variables, behavior variables are used and the strain energy has been treated as the cost function to be maximized so that the truss structure can absorb maximum energy. For design constraint of the optimal design problem, allowable stress, buckling stress, and displacement under multi-loading conditions are considered. In the second level, design problem is formulated using the cross-sectional area as the design variable and the weight of the truss structure as the cost function. As for the design constraint, the equilibrium equation with the optimal displacement obtained in the first level is used. In the third level, the nodal point coordinates of the truss structure are used as coordinating variable and the weight has been taken as the cost function. An advantage of the Three Level Decomposition technique is that the first and second level design problems are simple because they are linear programming problems. Moreover, the method is efficient because it is not necessary to carry out time consuming structural analysis and techniques for sensitivity analysis during the design optimization process. By treating the nodal point coordinates as design variables, the third level becomes unconstrained optimal design problems which is easier to solve. Moreover, by using different convergence criteria at each level of design problem, improved convergence can be obtained. The proposed technique has been tested using four different truss structures to yield almost identical optimum designs in the literature with efficient convergence rate regardless of constraint types and configuration of truss structures.