• Nuclear Engineering and Technology
• /
• v.33 no.4
• /
• pp.441-456
• /
• 2001

ABB-CE＇s regionalization methodology for the core inlet flow distribution map is reviewed. This methodology merges the test data of fuel assembly locations which are either in symmetry or strongly correlated with others. It increases the number of available test data for each regional flow factor It makes up effectively for the deficiency due to limited number of test data. It also contributes to making the core inlet flow distribution smoother not only locally but also over the entire core, and to relieving the impacts of test errors that may happen due to some do- calibrated local pressure measurement taps. As a result, the core inlet How distribution data becomes more statistically useful and thus the conservatism involved in handling the core inlet flow factors for the thermal margin analysis is expected to be reduced. Meanwhile, the regionalized map may lose the unique local characteristics in core inlet flow distribution too much. By an alternative approach introduced in the present work, it is shown that such a disadvantage can be mitigated somewhat if the engineering judgement is made more

• JOURNAL OF ELECTRICAL WORLD
• /
• s.350
• /
• pp.94-97
• /
• 2006

인구11억명의 무한한 시장‘인도’. 특히 인도는 IT 분야에서 세계 최고의 강국으로 부상하고 있다. 거기에 인도는 10여년간 연평균 GDP 성장률 6%대의 고도성장을 이룩하는 등 중국에 이어 경제강국으로의 탈바꿈을 꿈꾸고 있다. 이처럼 매력적인 시장을 기업들은 놓칠리가 없다. 이미 세계 유수의 기업들은 꿈틀대는 인도 시장을 주목해 왔다. 인도에 법인을 설립, 현지의 값싼 노동력을 이용해 가격 경쟁력을 갖추고 시장을 공략하고 있는가하면, 인도시장에 맞는 저가상품을 적극개발, 공급함으로서 시장점유율을 높이고 있다. 국내기업의 경우 자동차와 가점제품의 경우 비교적 성공적으로 정착한 사례로 꼽히고 있다. 현대자동차, LG전자, 삼성전자 등은 인도 현지에서 호평을 받을 정도로 경쟁력을 확보한 상태다. 하지만 전력 시장에서만큼은 아직까지 뚜렷한 성과를 얻어내지 못하고 있다. 가장 큰 이유는 평균 30% 이상에 달하는 관세율을 극복하지 못하고 있기 때문이다. 그리고 인도 수출의 경우 말처럼 쉽지는 않은 상황이다. 인도의 경우 영국의지배를 받던 국가라 아직까지 ABB, 시멘스 등 유럽업계의 강세가 뚜렷해 타 지역국가 업체들의 인지도가 높지 않은 상황이다. 무엇보다“대금이 들어와야 거래가 성사됐다”라고 말을 할 정도로 대금인수에 어려움을 겪는 사례가 부지기수고, 계약 파기도허다해 계약에들인 노력만큼 성공률이 높지 않은 것도 국내 전력 관련업계의 진출 부진의 한이유다. 그렇다고 인도 시장을 그냥 놓치기에는 너무아깝다. 이에 국내업계의 경우 매력적인 시장을 놓치지 않으려 계속해서 인도 시장 진출추진하고 있다. 인도 전력시장 현황을 소개하고, 수출을 위한 국내 업계의 노력 및 수출시 유의해야 할 사항을 종 합적으로 정리해봤다.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.209-219
• /
• 2010

In this paper, a novel dynamic available transfer capability (DATC) has been computed for real time applications using three different intelligent techniques viz. i) back propagation algorithm (BPA), ii) radial basis function (RBF), and iii) adaptive neuro fuzzy inference system (ANFIS) for the first time. The conventional method of DATC is tedious and time consuming. DATC is concerned with calculating the maximum increase in point to point transfer such that the transient response remains stable and viable. The ATC information is to be continuously updated in real time and made available to market participants through an internet based Open Access Same time Information System (OASIS). The independent system operator (ISO) evaluates the transaction in real time on the basis of DATC information. The dynamic contingency screening method [1] has been utilized and critical contingencies are selected for the computation of DATC using the energy function based potential energy boundary surface (PEBS) method. The PEBS based DATC has been utilized to generate patterns for the intelligent techniques. The three different intelligent methods are tested on New England 68-bus 16 machine and 39-bus 10 machine systems and results are compared with the conventional PEBS method.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1045-1046
• /
• 2007

As equivalent load method of induction motor, even without connecting load, for temperature rise test has been acknowledged economic and corrective method, the method has been widely used instead of the real load method, and also international standards IEC 61986 is published in 2002. ABB, an well-known and famous electric machinery maker in the world, has been already applying the equivalent load method since 2002. HHI has been using real load method and equivalent load method for temperature rise of induction motor, it is already known that the equivalent test results is higher as $1-5^{\circ}K$ than that of real load test. But, quantity analysis for the reason of the temperature rise is not satisfied sufficiently. So, in this paper, quality analysis and also quantity analysis was conducted.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.86-88
• /
• 2018

The three level(3L) neutral point clamped (NPC) voltage source converter (VSC) topology is widely used for grid interface in high power wind energy due to its superior performance as compared to the two level(2L) VS. However, one of the major drawbacks of this topology is the unequal dispersion of loss and therefore the junction temperature among the power devices. The 3L ANPC topology derived from the NPC topology was proposed to resolve this drawback of unequal loss profile of 3L NPC. The 3L ANPC can work under various switching strategies. In this paper a comparative study of the various switching strategies of 3L ANPC using the recently developed 10kV IGCTs which has the capability to raise the current and voltage rating of the wind turbines is carried out. The comparison is performed using ABB make 10kV IGCT 5SHY17L9000 and PLECs simulations.

• BMB Reports
• /
• v.40 no.4
• /
• pp.577-587
• /
• 2007

Single-copy chloroplast loci are used widely to infer phylogenetic relationship at different taxonomic levels among various groups of plants. To test the utility of chloroplast loci and to provide additional data applicable to hybrid evolution in Musa, we sequenced two introns, rpl16 and ndhA, and two intergenic spacers, psaA-ycf3 and petA-psbJ-psbL-psbF and combined these data. Using these four regions, Musa acuminata Cola(A)- and M. balbisiana Colla (B)-containing genomes were clearly distinguished. Some triploid interspecific hybrids contain A-type chloroplasts (the AAB/ABB) while others contain B-type chloroplasts (the BBA/BBB). The chloroplasts of all cultivars in 'Namwa' (BBA) group came from the same wild maternal origin, but the specific parents are still unrevealed. Though, average sequence divergences in each region were little (less than 2%), we propose that petA-psbJ intergenic spacer could be developed for diversity assessment within each genome. This segment contains three single nucleotide polymorphisms (SNPs) and two indels which could distinguish diversity within A genome whereas this same region also contains one SNP and an indel which could categorize B genome. However, an inverted repeat region which could form hairpin structure was detected in this spacer and thus was omitted from the analyses due to their incongruence to other regions. Until thoroughly identified in other members of Musaceae and Zingiberales clade, utility of this inverted repeat as phylogenetic marker in these taxa are cautioned.

• Nutrition Research and Practice
• /
• v.2 no.3
• /
• pp.165-170
• /
• 2008

Protein-energy malnutrition is regarded as one of the public health problems in developing countries as a result of poor feeding practices due to poverty. This study, therefore, aimed at evaluating nutritional quality of a potential weaning food formulated from locally available food materials. The cooking banana fruit(CB) and bambara groundnut seeds(BG) were purchased from local market in Akure, Ondo State, Nigeria. The CB and BG were processed into flours, mixed in ratios of 90:10, 80:20, 70:30 and 60:40 and subjected into proximate, sensory and biochemical analyses using standard procedures. Nutrend(a commercial formula) and ogi(corn gruel, a traditional weaning food) were used as control. The nutritient composition(g/100 g) of the food samples were ranged as follows: moisture 2.94-6.94, protein 7.02-16.0, ash 1.76-2.99, fat 0.76-8.45, fibre 1.52-3.75, carbohydrate 63.84-88.43 and energy 1569.8-1665.7 kcal. The biological value(BV), net protein retention(NPR), protein efficiency ratio(PER) and feed efficiency ratio(FER) of the experimental food samples were significantly(p<0.05) lower than nutrend, but higher than ogi. The haematological variables of rats fed with formulated food samples, commercial formula(nutrend) and traditional weaning food(ogi) were not significantly(p>0.05) influenced by the dietary treatment. However, the values obtained for red blood cell(RBC), white blood cell(WBC), pack cell volume(PCV) and erythrocyte sedimentation rate(ESR) were higher in the experimental food samples than the commercial food. The growth rate of animals fed with experimental food samples were lower than those fed with the nutrend, but higher than those fed with ogi. In conclusion, the nutritional quality of CB and fermented BG mix of 60:40 ratio was better than ogi; and comparable to the nutrend. This implies that it can be used to replace low quality traditional weaning food and the expensive commercial weaning formula.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.87-93
• /
• 2010

This paper presents a low-power, wide tuning range VCO with automatic two-step negative-Gm calibration loop to compensate for the process, voltage and temperature variation. To cover the wide tuning range, digital automatic negative-Gm tuning loop and analog automatic amplitude calibration loop are used. Adaptive body biasing (ABB) technique is also adopted to minimize the power consumption by lowering the threshold voltage of transistors in the negative-Gm core. The power consumption is 2 mA to 6mA from a 1.2 V supply. The VCO tuning range is 2.65 GHz, from 2.35 GHz to 5 GHz. And the phase noise is -117 dBc/Hz at the 1 MHz offset when the center frequency is 3.2 GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.131-138
• /
• 2018

In this study, we investigated the trend of technological development in major countries related to the propulsion equipment of railway vehicles. The propulsion system is the main equipment of electric vehicles. A lot of time and investment are required in order to ensure the development of technology. Therefore, developed countries have maximized their effort to develop technologies with safety, reliability, and convenience of maintenance. They have also done their utmost to prevent technology transfer to other countries after the development of new technologies. For example, Toshiba of Japan developed a new 3,300V/1,500 A class IGBT power device, but was reluctant to export it to foreign countries in order to protect this technology. In this study, we analyzed the patents applied for related to propulsion control systems and presented the direction of development during the technical development of these systems. The patent analysis of the core technologies was conducted using the Thomson Innovation DB. We examined the number of patents applied for by country, year and major applicant. As a result of the analysis, it was found that the proportion of patent applications per country was in the order of China, 48%, Europe 16.6%, and the United States 14.9%. The patent situation of the top 10 principal applicants revealed that (the top three were?) ABB 14%, GE 13%, and CRRC 12%. At the same time, we also conducted a qualitative analysis of the level of technical development by evaluating such factors as the influence index, quotation, market securing power and citation. Based on the result of the patent analysis, we presented the direction of technical development of the propulsion control equipment of railway vehicles. Based on the analysis results, it was found that domestic applicants considerably reduced their efforts to protect their patents from foreign companies. Nowadays, most of the electric motors used in Korea are induction motors. In advanced countries, permanent magnet electric motors are employed in new railway lines. Therefore, intensive investment is needed in new developments.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.2
• /
• pp.55-61
• /
• 2010

The device with tantalum silicide heater were bonded by Ag paste and Au SBB(Stud Bump Bonding) onto the Au coated substrate. The shear test after Au ABB and the thermal performance under current stressing were measured. The optimum condition of Au SBB was determined by fractured surface after die shear test and $350^{\circ}C$ for substrate, $250^{\circ}C$ for die during flip chip bonding with bonding load of about 300 g/bump. With applying 5W through heater on the device, the maximum temperature with Ag paste bonding was about $50^{\circ}C$. That with Au SBB on Au coated Si substrate showed $64^{\circ}C$. The difference of maximum temperatures is only $14^{\circ}C$, even though the difference of contact area between Ag paste bonding and Au SBB is by about 300 times and the simulation showed that the contact resistance might be one of the reasons.