• 대한조선학회논문집
• /
• 제52권2호
• /
• pp.143-152
• /
• 2015

In the present study, the fiber and matrix failure of composite laminates under arbitrary biaxial stresses were evaluated based on separate mode criteria such as Hasnin and Puck theories. There is a limitation to predict the fiber-dominant and/or matrix-dominant failures under arbitrary stress states using limit criteria (maximum stress and maximum strain theories) and interactive criteria (Tsai-Hill and Tsai-Wu theories). There is little literature for failure analysis of ships and offshore composite structures considering advanced failure theories such as Hashin and Puck theories. Furthermore, there is not enough practical commercial finite element analysis (FEA) code which is basically adopted the separate mode criteria. Hence, in the present study, the user-defined subroutine of commercial FEA code ABAQUS for evaluation of fiber and matrix failures of composite structures was developed based on Hashin and Puck failure criteria. And then, the proposed subroutine was validated by comparing with a series of experimental results of carbon- and glass-implemented composite laminates to guarantee the reliability and usefulness of the developed method.

• 한국항공우주학회지
• /
• 제43권1호
• /
• pp.1-7
• /
• 2015

본 연구에서는 탄소섬유강화 복합재를 적층각과 적층순서에 따라 C-channel 형상에서 발생하는 스프링-인을 유한요소해석(ABAQUS)을 통해 예측하였다. 복합재 제작공정에서 냉각시의 큰 온도차 및 적층각에 따른 열팽창계수 및 화학적 수축계수의 차이로 인해 변형(스프링-인)이 발생한다. 이러한 변형은 제품의 품질과 직결되는 문제이며, 반드시 고려되어야 할 사항이다. 유한요소해석 시 CHILE모델과 화학적 수축을 고려한 서브루틴을 제작하여 적용하였으며, [0/X/Y/90]s case에 대해 X,Y를 $0{\sim}90^{\circ}$까지 변화시키며 각 case에 대한 스프링-인 발생량을 예측, 분석하였다.

• Steel and Composite Structures
• /
• 제49권1호
• /
• pp.1-17
• /
• 2023

Based on Ahmadzadeh-Varvani hardening rule (A-V model), multiaxial ratcheting effect of Z2CND18.12N austenitic stainless steel is simulated by ABAQUS with user subroutine UMAT. The results show that the predicted results of the origin multiaxial A-V model are lower than the experimental data, and it is difficult to control ratcheting strain rate. In order to improve the predicted capability of A-V model, the A-V model is modified. In this study. Moreover, under the assumption of the von Mises yield criterion and normal plasticity flow rule, we develop a numerical algorithm of plastic strain with the improved model to implement the finite element calculation of the model. Internal iteration in the numerical algorithm was implemented with the Euler backward method, which calculated the trial strain for each equilibrium iteration using the consistent tangent matrix. With a user subroutine, the proposed model is programmed into ABAQUS for a user - executable version. By simulating the uniaxial ratcheting of a round bar made of Z2CND18.12N austenitic stainless steel, we observe that the predicted results simulated by ABAQUS with UMAT are compared with the experimental data. The predicted results of the improved multiaxial A-V model are consistent well with the experimental data.

• Composites Research
• /
• 제27권6호
• /
• pp.231-235
• /
• 2014

오토클레이브 성형은 성형제품의 품질은 우수하나 생산비용이 비싸다는 단점이 있다. 생산비용 중에서도 큰 비중을 차지하는 것이 성형툴의 제작공정이다. 따라서 본 연구에서는 생산비용 절감을 위한 선행 연구로서 성형툴의 재질 및 표면상태에 따라 L-shape 제품의 성형후 Spring-in을 Abaqus user subroutine을 이용하여 계산하였고, 열팽창계수와 마찰계수에 따른 결과를 나타내었다. 또한 성형툴 제작시 재질 및 표면상태의 기준점을 제시하여 생산비용을 줄이는데 기여하고자 한다.

• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.551-558
• /
• 2016

Reduction of welding residual stress is very important in the railway industry, but calculating its distribution in structures is difficult because welding residual stress formation is influenced by various parameters. In this study, we developed a finite element model for simulating the repair welding process to recover a surface damaged rail, and conducted a series of parametric studies while varying the cooling rate and the duration of post weld heat treatment (PWHT) to find the best conditions for reducing welding residual stress level. This paper presents a three-dimensional model of the repair welding process considering the phase transformation effect implemented by the ABAQUS user subroutine, and the results of parametric studies with various cooling rates and PWHT durations. We found that heat treatment significantly reduced the residual stress on the upper rail by about 170 MPa.

• 한국군사과학기술학회지
• /
• 제26권5호
• /
• pp.371-383
• /
• 2023

Artillery gun tube experiences very high pressure according to the blast of propellant charge. Therfore, it is essential to guarantee the structural safety of the gun tube. On the other hand, weight reduction of gun tube is also a crucial design factor since the agility of artillery vehicle directly leads to its survivability. In this line of thought, this work proposed an efficient design procedure which utilizes the convex combination of breech pressure and projectile base pressure time histories. Its efficiency is verified by comparing with other procedures. Other procedures utilize different computed max pressure rather than the convex combination design pressure. Additionally, a transient analysis is carried out considering the projectile movement and the corresponding pressure distribution through the newly developed ABAQUS user-subroutine. The analysis confirms the structural safety of the lightweight gun tube designed by the proposed method.

• 한국지반공학회논문집
• /
• 제37권1호
• /
• pp.5-15
• /
• 2021

북극권과 같은 한대지역의 동상민감성 지반은 계절적 대기 온도 변화 및 설치된 구조물의 온도에 의해 지반의 융기 및 침하 문제가 존재한다. 이러한 동상민감성 지반의 융기 및 침하 방지를 위한 지반안정화 공법으로는 매립 및 치환공법, 열 사이펀 등이 존재한다. 여기서 열 사이펀이란 내부 냉매의 증발, 응축을 반복하며 열 순환을 통해 이상 유동(two-phase flow)의 형태로 냉매가 지반의 온도를 외부로 전달하여 지반 온도를 조절 할 수 있는 공법이다. 본 연구는 이러한 열 사이펀의 성능을 열전도율로 수치화하기 위하여 ABAQUS 내부의 User-subroutine 코딩을 통해 열 사이펀을 지중의 한 열원으로 간주, 경계조건으로 적용시켜 기존 문헌의 열 사이펀 실내모형실험의 온도분포 결과와 비교하여 산정하였다.

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.275-280
• /
• 2011

In the present study, a unified viscoplastic-damage model has been applied in order to describe the mechanical characteristics of fresh water ice such as nonlinear material behavior and volume fraction. The strain softening phenomenon of fresh water ice under quasi-static compressive loading has been evaluated based on unified viscoplastic model. The material degradation such as growth of slip/fraction has quite close relation with material inside damage. The volume fraction phenomenon of fresh water ice has been identified based on volume fraction (nucleation and growth of damage) model. The viscoplastic-damage model has been transformed to the fully implicit formulation and the discretized formulation has been implemented to ABAQUS user defined subroutine (User MATerial: UMAT) for the benefit of application of commercial finite element program. The proposed computational analysis method has been compared to uni-axial compression test of fresh water ice in order to validate the compatibilities, clarities and usefulness.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.166-174
• /
• 2003

Hydrostatic bearings are widely used in precision machines due to their high motion guide accuracy, low friction and high load carrying capacity. It is very useful to estimate the moving characteristics of hydrostatic bearings in the design stage. A new method is suggested for the analysis of fluid film in hydrostatic bearings. A combined mesh of 8 node solid elements with negligible deformation resistance and spring-dashpot elements is used in conjunction with the user subroutine of ABAQUS to represent the fluid film. The mesh can be used to capture the deformation of the bearing structure as well as the varying properties of fluid film. Analysis results from the finite element model are compared with theoretical solutions, results from FLUENT analysis and some previous works. With this method, static and dynamic analyses of the system containing the bearings can be performed efficiently.

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.600-606
• /
• 2009

In this paper, the coupled model with hydrogen transport and elasto-plasticity behavior is introduced. This model is implemented to the general-purpose FE code, ABAQUS, via the user-defined subroutine UMAT and UMATHT. In UMAT, the spatial gradients of hydrostatic stress and hydrogen induced deformation are calculated, and then are passed into UMATHT. Heat transfer equation within UMATHT is substituted by hydrogen transport equation including the effects of stress states and strain hardening. To validate this model, the finite element analyses coupled with hydrogen transport and mechanical loading are performed for the boundary layer specimens with low and high strength steel properties. The FE results are compared with the previous studies by Taha and Sofronis (2001).