• Title/Summary/Keyword: A375

Search Result 2,455, Processing Time 0.025 seconds

An Empirical Study on Expectation Factors and Certification Intention of ISMS (ISMS 인증 기대 요인 및 인증 의도에 관한 연구)

  • Park, Kyeong-Tae;Kim, Sehun
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.25 no.2
    • /
    • pp.375-381
    • /
    • 2015
  • In the past few years, data leakage of information assets has become prominent issue. According to the NIS in South Korea, they found 375 cases of data leakage from 2003 to 2013, especially 49 of cases have been uncovered in 2013 alone. These criminals are increasing as time passes. Thus, it constitutes a reason for establishment, operation and certification of ISMS, even for private enterprises. The purpose of this study is to examine the factors influencing the certification intention of ISMS using EFA (Exploratory Factor Analysis) and regression analysis. We identified expectation factors for certification of ISMS from 13 elements using EFA (Strengthening practical ability & economic effect factor and Improvement of security level & handling incident factor). Next, we examined that the certification intention of ISMS using regression analysis. As a result of regression analysis, Strengthening practical ability & economic effect factor is not significant for the certification intention of ISMS (p<.05). Also, Improvement of security level & handling incident factor have a significant and positive effect on the certification intention of ISMS (p<.05).

Screening of Inducible Resistance Genes to Macrolide-Lincosamide-Streptogramin B(MLS) Antibiotics (마크로라이드-린코사마이드-스트렙토그라민 B(MLS)계 항생물질에 대한 유도 내성)

  • Kwon, Ae-Ran;Choi, Sung-Sook;Kim, Sook-Kyung;Chung, Young-Ja;Choi, Eung-Chil;Kim, Byoung-Kak
    • YAKHAK HOEJI
    • /
    • v.38 no.3
    • /
    • pp.293-299
    • /
    • 1994
  • Forty nine clinical isolates of S. aureus showing resistance to erythromycin(EM) were selected from 83 strains isolated recently in Korea. Fourteen strains of S. aureus showing inducible resistance to MLS antibiotics were selected by disc agar diffusion method. Colony hydridization was executed using two MLS inducible resistance genes, ermA and ermC, identified previously from S. aureus as probes. S. aureus 375 and S. aureus 507 whose genes were not homologous to those probes were finally selected. It was confirmed that the resistance genes of S. aureus 375 and S. aureus 507 had no homology with those probes in southern hybridization test using ermA, ermC and ermAM as probes. It was determined that S. aureus 375 had a plasmid whose size was about 35 kb. To know if the plasmid may have the genes related to inducible resistance to MLS antibiotics, it was attempted to transform Bacillus subtillis BR151 and S. aureus RN4220 with the plasmid isolated from S. aureus 375. It was shown that the gene related to inducible resistance to MLS antibiotics did not exist in this plasmid. These results indicate that two clinical isolates of S. aureus showing inducible resistance to MLS antibiotics have novel genes that have no homology with MLS resistance genes identified so far. It is assumed that these genes may exist in chromosomal DNA.

  • PDF

133Cs Nuclear Magnetic Resonance Relaxation Study of the Phase Transition of Cs2MnCl4·2H2O Single Crystals

  • Heo, Cheol;Lim, Ae-Ran
    • Journal of the Korean Magnetic Resonance Society
    • /
    • v.14 no.2
    • /
    • pp.76-87
    • /
    • 2010
  • The structural phase transition of $Cs_2MnCl_4{\cdot}2H_2O$ single crystals was investigated by determining the $^{133}Cs$ spin-lattice relaxation time $T_1$. The number of resonance lines in the $^{133}Cs$ spectrum changes from seven to one near 375 K, which means that above 375 K the Cs sites are symmetric. Further, the $T_1$ of the $^{133}Cs$ nucleus undergoes a significant change near 375 K, which coincides with the change in the splitting of the $^{133}Cs$ resonance lines. The change in $T_1$ near $T_C$ is related to the loss of $H_2O$, and means that the forms of the octahedra of water molecules surrounding $Cs^+$ are disrupted.

Reproductive Toxicity Study of SM-101(sulbactam.metampicillin): Teratogenicity Study in Rats (복합항생제 SM-101(설박탐.메탐피실린)의 생식독성연구: 랫트 최기형시험)

  • 정문구;김종춘;한상섭
    • Biomolecules & Therapeutics
    • /
    • v.4 no.1
    • /
    • pp.59-67
    • /
    • 1996
  • A new composite antibiotic, SM-101(sulbactam·metampicillin), was at dose levels of 0, 375, 750 and 1500 mg/kg/day administered intravenously to pregnant Sprague-Dawley rats during the organogenetic period. Two-third of dams per group were subjected to caesarean section on day 20 of pregnancy and the remaining 10 dams per group were allowed to deliver. Effects of test substance on dams, embryonal development of F1 fetuses, as well as growth, behaviour and mating performance of F1 offspring were examined. In dams, two deaths occurred at 375 and 1500 mg/kg, respectively. The decrease in the weight of adrenal glands of the 1500 mg/kg group was observed. The prolongation of pregnancy period was found at 1500 mg/kg. F1 fetuses showed no changes related to the treatment of SM-101. In F1 offspring, the increase in spleen weight was seen at all doses treated. No treatment-related abnormalities were observed in each treated group in terms of development, behaviour and reproductive performance. In F2 fetuses, no drug-induced abnormalities occurred at all doses. The results show that the no-effect dose levels (NOELS) for dams and Fl offspring are under 375 mg/kg/day and NOELs for F1/F2 fetuses are over 1500 mg/kg/day.

  • PDF

A Differential Current-to-Time Interval Converter Using Current-Tunable Schmitt Triggers

  • Chung, Won-Sup
    • Journal of IKEEE
    • /
    • v.21 no.4
    • /
    • pp.375-380
    • /
    • 2017
  • A differential current-to-time interval converter is presented for current mode sensors. It consists of a ramp voltage generator, a current mode sensor, a reference current source, two current-tunable Schmitt triggers, a one-shot multivibrator, and two logic gates. The design principle is to apply a ramp voltage to each input of the two current-tunable Schmitt triggers whose threshold voltages are proportional to the drain current values of the current mode sensors. A proposed circuit converts a current change in the ISFET biosensor into its equivalent pulse width change. A prototype circuit built using TSMC 0.18 nm CMOS process exhibit a conversion sensitivity amounting to $726.9{\mu}s/pH$ over pH variation range of 2-12 and a linearity error less than ${\pm}0.05%$.

A Case of Fascioliasis in A Wild Nutria, Myocastor coypus, in Republic of Korea

  • Kim, Hyo-Seok;Kong, Joo-Yeon;Kim, Jong-Hyun;Yeon, Seong-Chan;Hong, Il-Hwa
    • Parasites, Hosts and Diseases
    • /
    • v.56 no.4
    • /
    • pp.375-378
    • /
    • 2018
  • A total of 44 adult or juvenile nutrias were necropsied for disease survey. A large nodule was found in the liver of a nutria. The histopathological specimen of the hepatic nodule was microscopically examined, and sectional worms were found in the bile duct. The worms showed a tegument with spines, highly branches of vitelline glands and intestine. Finally, we histopathologically confirmed fascioliasis in a wild nutria. In the present study, a case of fascioliasis in a wild nutria is first confirmed in Korea.

Design of an Antireflection Coating for High-efficiency Superconducting Nanowire Single-photon Detectors

  • Choi, Jiman;Choi, Gahyun;Lee, Sun Kyung;Park, Kibog;Song, Woon;Lee, Dong-Hoon;Chong, Yonuk
    • Current Optics and Photonics
    • /
    • v.5 no.4
    • /
    • pp.375-383
    • /
    • 2021
  • We present a simulation method to design antireflection coating (ARCs) for fiber-coupled superconducting nanowire single-photon detectors. Using a finite-element method, the absorptance of the nanowire is calculated for a defined unit-cell structure consisting of a fiber, ARC layer, nanowire absorber, distributed Bragg reflector (DBR) mirror, and air gap. We develop a method to evaluate the uncertainty in absorptance due to the uncontrollable parameter of air-gap distance. The validity of the simulation method is tested by comparison to an experimental realization for a case of single-layer ARC, which results in good agreement. We show finally a double-layer ARC design optimized for a system detection efficiency of higher than 95%, with a reduced uncertainty due to the air-gap distance.

Waveguide-type Multidirectional Light Field Display

  • Rah, Hyungju;Lee, Seungmin;Ryu, Yeong Hwa;Park, Gayeon;Song, Seok Ho
    • Current Optics and Photonics
    • /
    • v.6 no.4
    • /
    • pp.375-380
    • /
    • 2022
  • We demonstrate two types of light field displays based on waveguide grating coupler arrays: a line beam type and a point source type. Ultra violet imprinting of an array of diffractive nanograting cells on the top surface of a 50-㎛-thin slab waveguide can deliver a line beam or a point beam to a multidirectional light field out of the waveguide slab. By controlling the grating vectors of the nanograting cells, the waveguide modes are externally coupled to specific viewing angles to create a multidirectional light field display. Nanograting cells with periods of 300 nm-518 nm and slanted angles of -8.5°~+8.5° are fabricated by two-beam interference lithography on a 40 mm × 40 mm slab waveguide for seven different viewpoints. It is expected that it will be possible to realize a very thin and flexible panel that shows multidirectional light field images through the waveguide-type diffraction display.

Performance of a Static Concentrator Photovoltaic Based on 4× Compound Parabolic Concentrator for Electric Vehicle Applications

  • Hoang Vu;Tran Quoc Tien;Nguyen Van Nhat;Ngoc Hai Vu;Seoyong Shin
    • Current Optics and Photonics
    • /
    • v.8 no.4
    • /
    • pp.375-381
    • /
    • 2024
  • In this report, we present the design, fabrication, and experiment of a static solar system for electric vehicle (EV) applications. The static concentration component is composed of compound parabolic concentrators (CPCs) couplings with multi-junction solar cells, where a flat silicon panel is added to the bottom of the CPV structure to maximize power generation. This design allows the system to collect both direct sunlight and diffused sunlight. The CPCs were fabricated with acrylic with a geometric concentration ratio of 4×. We built a prototype with a (3 × 3) cell array of CPCs with a thickness of 25 mm, which is as thin as conventional flat photovoltaic panels, and performed an outdoor experiment that showed that after six hours of operation, the system had an acceptance angle of approximately 43° and an average daily efficiency of 22.85%.