• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.429-437
• /
• 1999

Heavy metals(Cd, Cu, Pb and Zn) in tree rings of P. thunbergii growing at Onsan Industrial Complex of air polluted area were analyzed to study the condition of heavy metal pollution. The tree ring width began to decrease after operation of factories and decreased abruptly at Onsan Industrial Complex after 1991. Cd contents in tree rings showed 119.4ppb to 867.0ppb level and suddenly increased after 1991. Cu contents showed 309.5ppb to 3686.8ppb, and Pb contents 911.33ppb to 7997.1ppb and fluctuations of those were high after operation of factories. Zn contents showed the highest level of 3528.7ppb to 23826.7ppb and largely ascended after 1960, and increased suddenly after 1992, as compared to former tendency. On the other hand, heavy metal contents in tree rings of P. thunbergii at Gosung of non-air polluted area were far lower than Onsan I. C., and there was a wide difference between both areas after 1990. On the heavy metal contents accumulated in bark of P. thunbergii of both areas, it was higher to 10 times in Cd, 1,000 times in Cu, 285 times in Pb and 133 times in Zn contents at Onsan than at Gosung. In the heavy metal analysis for circle plate and cores, heavy metal contents in cores were generally higher than those in disk and Pb contents showed specially high difference, but pattern of variation by tree age showed a similar tendency.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.4
• /
• pp.278-285
• /
• 1991

This study was conducted to manufacture a good qualified organic fertilizer with cow dung through rapid composting process, and the proposal guideline of the degree of maturity could be estimated with the measurement of final product. It included total nitrogen content of above 2% on an oven-dry material basis, C/N ratio of below 20, CEC of more than about 60 me/100g, ratio of carbon in reducing sugar to the total carbon of below 35%, and temperature in pile of above $60^{\circ}C$. The total nitrogen content, the C/N ratio, and the Paper Chromatographic method couldn't be the guideline to evalute the maturity of cow dung compost. CEC was increased in increased fermentation and it was high in the high fermented temperature plots which were cow dung+ shredded bark in 1988, cow+dung+wood chips in 1989, and cow dung+rice straws in 1990. The ratio of carbon in reducing sugar to total carbon in 1990 was lower in cow dung+saw dust than cow dung+rice straws that was the highest temperature in pile. Generally cow dung was mixed well with saw dust and thus the total carbon of the product was high. The measurement of the temperature in pile seems to be a indirect guideline of maturity.

• Korean Journal of Microbiology
• /
• v.32 no.4
• /
• pp.285-290
• /
• 1994

About 500 bacterial and fungal strains from a wide variety of natural habitats were screened for a new type II restriction endonuclease. Among the 500 species, we selected one species that produced a new restriction endonuclease. This strain has an optimum temperature of $30^{circ}C$ for growth. Morphological, cultural, and physiological characteristics were examined for identification of the isolated strain J-482. This strain was found to belong to the genus Alcaligenes. The restriction endonuclease was named as AspJI and partially purified from Alcaligenes sp. J-482 by DEAE-Sephadex A-50 column chromatography and gel filtration. Most of other nucleases were removed by the purification steps. The AspJI has a substrate specificity to ${lambda}$ DNA, pBR322 and Adenovirus-2 DNA. For its maximal activity, the isolated enzyme requires $MgCl_2$, which should be at least 12.5 mM and it does not need any other cofactors. It is maximally active in the absence of NaCl and is completely inactivated at 100 mM NaCl. The pH and temperature optima for activity were pH 7.5 and $37^{circ}C$, respectively. The DNA fragments generated by digesting ${lambda}$ DNA, pBR322, and Adenovirus-2 DNA with AspJI were the same as that produced by AatII. This suggests that AspJI is an isoschizomer of AatII.

• The Korean Journal of Mycology
• /
• v.21 no.4
• /
• pp.285-292
• /
• 1993

For the enzymatic conversion of 5'-XMP to 5'-GMP, partially purified XMP aminase from Escherichia coli was coupled with the yeast, Saccharomycrs cerevisiae, capable of ATP regeneration through glycolytic pathway. In order to elevate the level of XMP aminase in E. coli, $guaB^{-}(IMP\;dehydrogenase-less)$ mutant were introduced, and the yeast used as ATP supplier was treated by some method to increase its membrane permeability. The optimum conditions for efficient conversion reaction by energy-coupled system were investigated. As the results, a CH 41, $guaB^-$ mutant of E. coli K-12, showed 2.75 fold increase in the level of XMP aminase, compared with its parent cell. And the lyophylized yeast was the most effective at the ATP supplier. The optimum temperature and pH of conversion reaction were $40{\circ]C$ and pH 7.4, and the highest conversion ratio was shown under the reaction condition of 100 mM glucose, 100 mM inorganic phosphate and 6 mM AMP. When 36 units/ml XMP aminase used under the above conditions, the amount of 60 mg/ml yeast was sufficient to be used. Under the optimum condition, 71% of 1.8 mM(65.6 mg/100 ml) 5'-XMP was converted to 5'-GMP within 8 hr.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2006

Fretting fatigue behavior of SCM420 steel commonly used in the automotive industry for structural applications was investigated in this study. In addition, the effect of bridge pad on the fretting fatigue test was evaluated from different pad materials and following conclusions were drawn. Simple fatigue limit of SCM 420 steel was determined to be 350 MPa while this value was 225 MPa and 285.5 MPa with SCM420H and with SM45C pad, respectively. Reduction in fatigue limit was, thus found to be 35.7% and 17.9% with SCM 420H pad and SM45C pad, respectively. Results of fracture surface observation revealed that typical striation pattern of fatigue failure existed as well as dimpled and cleavage frature appearance was found in final fractured region. From the EDS compositional analysis, test sample and pad part all had high signals for oxygen and iron, suggesting that worn particles might be iron oxide, although exact chemical composition has to be confirmed. Considerable reduction in fatigue life was apparent in SCM 420 steel under fretting fatigue against simple fatigue. Such reduced fatigue life by fretting damage should be considered as an important factor not only in the viewpoint of repairing but also inevitably in the design stage of structural components.

• Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.184-191
• /
• 2008

Long term monitoring was conducted to investigate a surface runoff of pollution from urban highway. The monitoring data was collected for 18 rainfall events and was used to correlate pollution load to various parameters, such as rainfall intensity, antecedent dry days and total discharge flow. Runoff coefficient and seasonal variation were also evaluated. The mean runoff coefficient of the highway was 0.823(range; $0.4687{\sim}0.9884$), and wash-off ratio for $COD_{Mn}$ and SS loads was 72.6% and 64.3%, respectively. For the initial rainfall event, the runoff EMC of $COD_{Mn}$ was high in summer and the EMC of SS was high in autumn season. However the seasonal variation of T-N and T-P was not significant. The discharged $COD_{Mn}$-EMC was $147.6\;mg/L{\sim}9.0\;mg/L$ on the generated $COD_{Mn}$-EMC of $98.8\;mg/L{\sim}8.9\;mg/L$. While the generated EMC of SS was in $285.7\;mg/L{\sim}20.0\;mg/L$ and its discharged EMC was in $190.4\;mg/L{\sim}8.0\;mg/L$. EMC of pollutants was not directly related to the first flush rainfall intensity and the antecedent dry days. But the correlation was relatively high between EMC and cumulative runoff flow volume. The trend of EMC was reduced with the cumulative runoff flow volume.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.285-289
• /
• 1990

Scoring difference test was applied for determining the organoleptic characteristics of mushrooms which was ${\gamma}-irradiated$ in connection with the shelf-life extension. Irradiation at 1 to 3kGy caused a significant softening of mushroom tissue (p<0.05), but it showed no immediate influence on the overall appearance, flavor and taste of mushrooms. After 17 days of storage at $9{\pm}1^{\circ}C\;and\;80{\pm}7%$ RH, 2 to 3 kGy-irradiated mushrooms were significantly better than the nonirradiated control in the sensory properties such as appearance, texture, flavor and taste (p<0.01). Organoleptic scores have shown that the irradiated samples are acceptable more than 17 days, compared to 7 days in the nonirradiated control.

• Journal of Aquaculture
• /
• v.6 no.4
• /
• pp.285-293
• /
• 1993

Gynogenetic diploid of olive flounder, Paralichthys olivaceus were induced by cold shock to fertilized eggs with red sea bream, Paragus major sperm that had been genetically inactivated with 4,800 ergs/$mm^2$ ultraviolet (UV) rays. Cold shock to the eggs at $2^{\circ}C$ for 45 minutes proved to be optimum condition to retain the second polar body. At this treatment, hatching rates of normal fry obtained were more than $33.8\%$. No different growth rates were observed up to 200 days after hatching between control and gynogenetic diploid offsprings. However, body weights of gynogenetic diploids were significantly heavier than that of control 300 days after hatching (p> 0.05). A proportion of female in gynogenetic diploid was significantly higher than that in the control (p< 0.01).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.22-26
• /
• 2013

PTCR ceramics of $(Ba_{0.998}Sm_{0.002})TiO_3+0.001MnCO_3+xSiO_2$ (x=1, 2, 3, 4, 5, 6 mol%) were fabricated by solid state method. Disk samples of diameter 5 mm and thickness about 1mm were sintered at $1,290^{\circ}C$ for 2 h in reduced atmosphere of $5%H_2-95%N_2$ followed by re-oxidation at $600^{\circ}C$ for 30 min. in $20%O_2-80%N_2$.and their microstructures and electrical properties were investigated with SEM and Multimeter. The color of sintered samples was strongly dependent on $SiO_2$ content showing that the color of samples with $SiO_2$ of 1~2 mol% was gray but that of samples with $SiO_2$ of 4~6 mol% was changed from gray to blue, which seems to be related with the reduction of samples due to the oxygen vacancies created during the sintering in reduced atmosphere. $SiO_2$ content had a great influence on the microstructure and the electrical properties. With increasing $SiO_2$ content, the grain size of samples increased and the resistivity as well as the resistivity jump ($R_{285}/R_{min}$) decreased, which is considered to be attributed to the resistivity change at grain interior and grain boundary due to the fast mass transfer through $SiO_2$ liquide phase during the sintering. Samples with 2 mol% $SiO_2$ has the resistivity of $202{\Omega}cm$ and the resistivity jump of 3.28. It is expected that $SiO_2$ doped $BaTiO_3$ based PTC ceramics can be used for multilayered PTC thermistor due to the resistance to the sintering in reduced atmosphere.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.279-285
• /
• 2012

The co-precipitation technique has been applied to synthesize Biphasic Calcium Phosphate (BCP), Mg-BCP and Si-BCP. X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy were used to characterize the structure of synthesized BCP, Mg-BCP and Si-BCP powders. The results have shown that BCP and substitution of magnesium and silicon in the calcium deficient apatites revealed the formation of biphasic mixtures of Hydroxyapatite (HAp)/${\beta}$-Tricalcium phosphate (${\beta}$-TCP) ratios after heating at $1000^{\circ}C$. Ionic substituted BCP is able to develop a new apatite phase on the surface in contact with physiological fluids faster than BCP does. An MTT assay indicated that BCP, Mg-BCP, and Si-BCP powders had no cytotoxic effects on MG-63 cells, and that they have good biocompatibility.