• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.1070-1073
• /
• 2010

센서 네트워크 환경에서 센서 노드들은 무선 통신 능력을 이용하여 접근하기 어려운 시공간적 환경에서 센싱 데이터를 송수신하며 각종 데이터를 수집, 분석, 감시 및 처리를 용이하게 한다. 이러한 센서 노드들은 동적으로 변화하는 환경에 대한 적응력이 떨어지고, 센서 데이터의 과잉 및 중복 송수신으로 인한 전력이나 네트워크 대역폭 관련 등의 문제점을 가진다. 이에 본 논문에서는 센서 노드를 이주하며 중복 데이터를 제거하고, 사용자나 어플리케이션의 요구에 적합한 데이터만을 수집 및 전송하여 데이터의 과잉 송수신으로 인한 전력낭비와 네트워크 부하를 줄일 수 있는 이동 에이전트를 설계한다. 또한 기존 멀티 에이전트 시스템과의 연계를 통한 이동 에이전트의 이주 알고리즘을 제시하고, 실제 이동 에이전트의 통신 수행과정을 보임으로써 설계 방법의 유효성을 보인다.

• Annual Conference of KIPS
• /
• 2020.11a
• /
• pp.1070-1073
• /
• 2020

본 논문은 무선통신 중 하나인 블루투스를 이용하여 일반적인 센서로 이루어진 보안시스템, 보행, 주행 중 주변 감지 등 야간에 시야 확보가 잘 되지 않거나 예기치 못한 상황 속 사람을 인식하지 못해 야기되는 문제를 사용자에게 즉시 알려줌으로써 문제를 해결할 수 있고, 블루투스로 정해진 입력 값을 넣어주면서 시스템을 임의로 조작하여 해결하고자 PIR 센서로 사람 인식 후, 일정 거리 안으로 들어오면 초음파 센서로 인식해 버저가 울리며 무선통신 중 하나인 블루투스로 사용자에게 알려주고 시스템을 블루투스로 제어할 수 있는 강화된 디지털화 된 시스템으로 IT 관련 기술을 활용하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.404-407
• /
• 2011

This paper presents a design of current mode PWM/PFM DC-DC Boost converter. This DC-DC Boost Converter operates with PWM mode at the heavy loads and with PFM mode at light loads. The DC-DC boost converter is designed with CMOS 0.35${\mu}m$ technology. It operates at 500KHz and can drive a load current up to 600mA. It has a maximum power efficiency of 92.1%. The total chip area is $1300{\mu}m{\times}1070{\mu}m$ including pads. The DC-DC boost converter operates in a wide range of load currents while occupying a small chip area.

• The Korean Journal of Mycology
• /
• v.22 no.4
• /
• pp.355-365
• /
• 1994

An extensive ssurvey was conducted on the occurrence of hyperparasites (HP) on powdery milew species in Korea during $1991{\sim}1994$ seasons. As a result, a total of 1070 materials infected with powdery mildew fungi were collected. Of these, 92 ones were infected with the HP; 6 with the unidentified HP and the rest 86 with Ampelomyces quisqualis. This showed infection of powdery mildew species with HP was common phenomenon in nature and A. quisqualis was the most common HP in Korea. To prove the hyperparasitism of A. quisqualis, 24 isolates from 32 collections in 1992 year were successfully cultured. All isolates tested were hyperparasitic to cucumber powdery mildew, Sphaerotheca fusca.

• Journal of Korean Academy of Nursing
• /
• v.42 no.7
• /
• pp.1070-1078
• /
• 2012

Purpose: The purpose of this study was to examine the effects of a face-to-face self-management educational program on knowledge, self-care practice and kidney function in patients with chronic kidney disease (CKD) before kidney replacement therapy. Methods: This study employed a nonequivalent control group, non-synchronized design. Data were collected from 61 patients with CKD visiting an outpatient department of nephrology in a university hospital in Seoul, South Korea. The experimental group (n=31) took the pre-test, then after 3 weeks, face-to-face education and individualized consultation (1st intervention), after a week of self-practice, the 1st post-test, followed by re-enforcement education and consultation (2nd intervention), and 4 weeks later, the 2nd post-test. The control group (n=30) took the pre-test and post-tests at 4 and 8 weeks. Results: Scores for knowledge of CKD and self-care practice over time improved significantly in the experimental group compared to the control group. Kidney function did not improve significantly in the experimental group. Conclusion: Health care providers can identify various and individualized needs, and provide effective education and consultation through face to face self-management for patients with chronic irreversible illnesses. Nurses can coordinate for these program by designing and providing systematic and effective education.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.8 s.239
• /
• pp.1070-1077
• /
• 2005

The $40\%$ of wall thickness criterion which has been used as a plugging rule is applicable only to a single cracked steam generator tubes. In the previous studies performed by authors, several failure prediction models were introduced to estimate the plastic collapse pressures of steam generator tubes containing collinear or parallel two adjacent axial through-wall cracks. The objective of this study is to examine the failure prediction models and propose optimum ones for non-aligned two axial through-wall cracks in steam generator tubes. In order to determine the optimum ones, a series of plastic collapse tests and finite element analyses were carried out for steam generator tubes with two machined non-aligned axial through-wall cracks. Thereby, either the plastic zone contact model or COD based model was selected as the optimum one according to axial distance between two clacks. Finally, the optimum failure prediction model was used to demonstrate the conservatism of flaw characterization rules for various multiple flaws according to ASME code.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1070-1077
• /
• 2013

Owing to the consistent increase in energy efficiency issues, studies for improving regenerative energy utilization have been receiving attention in the Urban DC railway systems, where currently, the utilization of regenerative energy is low due to the lack of a specific plan for using this energy. The regenerative energy in railway systems has a low efficiency problem which results in the increase of the catenary voltage and a possibility to create problems to the electrical devices connected to the system. This paper deals with the power integration of large urban railway subsystems to improve regenerative energy utilization where the railway subsystems are integrated with other railway subsystems to improve the energy efficiency. Through the case studies, to find the realistic effect of integrated operation, the Seoul Metro subsystems, namely Line 5 and Line 7, has been applied. Also, evaluation for the electricity cost saving has been performed by using KEPCO electricity cost table.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1070-1076
• /
• 2005

Vibration test using the MAST(multi axial simulation table) provide a more reliable testing environment than any conventional one. The multi axial simulation could be possible with a advanced control algorithm and hardware supports so that most of the operation is automatically conducted by MAST system itself except the input information that is synthesized by the measured response signals. That means the reliability of the vibration test is highly depended on the quality of the input profile. In this paper, the optimal algorithm based on the energy method is introduced to construct a best combination of candidated input PSD data could be constructed. Since the optimal algorithm renders time information, the nitration fatigue test is completely possible for any measured signals one wants. The proposed method is explained with representing acquired road signals from the candidate input PSD obtained from a proving ground.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1070-1075
• /
• 2019

In this paper, I propose an algorithm to generate an input digit image for a digit recognition system by detecting a digit string in an image and segmenting the digits constituting the digit string. The proposed algorithm detects blobbed digit string through blob detection, designates a digit string area and corrects digit string skew using the detected blob information. And the proposed algorithm corrects the digit skew and determines the boundary points for the digit segmentation in the corrected digit sequence using three CPgraphs newly defined in this paper. In digit segmentation experiments using the image group including digit strings printed with a range of the font sizes and the image group including handwritten digit strings, the proposed algorithm successfully segments 100% and 90% of the digits in each image group.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1069-1070
• /
• 2012