• Current Research on Agriculture and Life Sciences
• /
• v.29
• /
• pp.11-19
• /
• 2011

This research gives weight to establish practical improvement based on analysis of the landscape ecological character and value to realize the importance of small wetland and stream in cultivated areas functioning as a residual landscape element in rural landscape and to deal with ecological depression effectively. The results of summary are as follows. 1) The results of landscape ecological character analysis of wetlands biotop in total of 7 sites, for example, size of surface in site 5 was widely formed about $10,600m^2$, which was assessed satisfactory in terms of slope of waterfront, width of hedgerow, vegetation condition of composition and so on. Also, The number of flexibility showed 2 in site 8-1, the highest, and morphological diversity showed 1.47, the highest. 2) The results of problem analysis of wetland biotop, most of wetlands are analyzed that the width of hedgerow was below 1m. Also, the 4 wetlands in site 8 are appeared that hard to live slope vegetation in there because of slope of waterfronts are above $45^{\circ}$. 3) The results of landscape ecological character analysis of stream in total of 6 sites, for example, width of waterfront in site 4 showed 55m, the widest, and investigated consist of natural ingredients such as soil, rock, gravel. However, width of waterfront in site 2-2 showed 4m, the narrowest, and inclined angle of slope was formed a right angle. 4) The results of problem analysis of stream, width of waterfront hedgerow in site 2-1 showed about 5m, which was very narrower than width of waterfront, and toxic chemicals discharged from near cultivated area without any filtering. Also, all areas of site 2-2 was formed concrete, and was assessed dissatisfactory in terms of capacity of nature purification, flood control, habitat living space because of straight stream. 5) Based on the result above landscape ecological character and problem analysis, main improvement guidelines are set in terms of shape, vegetation, topography in case of wetlands, and which are set in terms of vertical, horizontal structure in case of stream.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.85-92
• /
• 1974

Many of studies on the transovarial transmission of occult virus and their activation due to various stresses such as cold or heat treatment, chemical feeding, and nutritional deficiency, etc., in the silkworm, Bombyx mori L. have been made, but any attempts have been not made to control virus diseases by detection of the occult virus-carried moths in the production of silkworm egg of hybrids, because of difficulty to detect occult virus in any stage. Therefore, it may be worth while to disclose whether a sublethal infection of the moths from which active virus are detectable, has the same level of induction rate as that of occult virus activation, thus to apply its results for the reduction of the occurence of virus diseases in silkworm rearing. For these purposes, the following experiment was conducted as one of preliminary steps. In this study, investigations on the generation-to-generation transmission of occult virus and a sublethal infection, and the role of chromosomal gene of the host, Jam 103 and Jam 104 in the Previous generation, and Jam 103 x Jam 103 and Jam 104 f Jam 104 in the next generation were made for the induction of virus diseases due to the transmitted virus. The frequency of cytoplasmic polyhedrosis due to the induction in the F$_1$ generation was markedly higher in the cross-batches, male$\times$female and male$\times$female in which inoculated individuals were used as fem ale parents than in the cross-batches, male$\times$female and male$\times$female in which virus has been not inoculated or inoculated only to male in the previous generation. The tendency of increasing rate was observed in any treatments; such as the inoculations of cytoplasmic polyhedrosis virus (10$\^$5/, 10$\^$6/ 10$\^$7, and 10$\^$8//ml ill different concentration of inocula) , cold-treatment (5$^{\circ}C$, 12hrs or 24hrs), and formalin-feeding treatment (2％ or 3％). The shape of polyhedra (tetragonal in outline) examined in the F, larvae was identified as that of the inoculated polyhedra with partial application of immunofluorescent techniques. These results suggests that the cytoplasmic polyhedrosis virus in B. meri L. are transmitted to the next generation through the egg, apparently in the occult state. And the experimental results of various cross-batches revealed the egg cytoplasm plays an important part i the transmission of the occult virus of the cytoplasmic polyhedrosis virus,

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.207-214
• /
• 1996

This study was conducted to obtain fundamental information on forage sorghum breeding in forage crop field of Livestock Experiment Station at Suwon from 1986 to 1991. The charcterization of sorghum germplasm was performed through 1986 to 1987, and after parental lines were selected from diverse sorghum germplasm on the basis of flowering date, plant height and several morphological characters for forage sorghum Fl hybrids. The range of variation of 50% flowering date and plant height were greater in order of forage sorghum sudangrass and male sterile line of grain sorghum. The average flowering date was earlier in sudangrass and male sterile line of grain sorghum than forage sorghum lines from the tested sorghum germplasms. And the average plant height was tall in order of forage sorghum, sudangrass and male sterile lines of grain sorghum. There were remarkable morphological variations between sudangrass lines and male sterile lines of grain sorghum such as plant color, leaf midrib color, glume color, seed coat color, head compactness and shape, awns, grain covering and 100 seed weight.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.950-955
• /
• 2007

Non-point source control system which had been designed only for oil-water separation in the fields of oil refinery and garage was upgraded in this research for the removal of runoff pollutants in impervious urban area. Pollutants including oil from driveway and bridge were eliminated by two types of pathway in the system. One is the coalescence mechanism that the oil droplets in the runoff come into contact with each other in the spiral buoyant media surface and form larger coalesced droplets of oil that are carried upstream to the oil layer. The other is the precipitation that solids in runoff were settled by gravity in the system. In this research, coalescing characteristics of oil and water separation were investigated through image analyses, and efficiencies of the non-point source control system were evaluated using dust in driveway and waste engine oil. Media made of high density and high molecular weight polyethylene was indeterminate helical shape and had sleek surface by analysing SEM photographs and BET. Surface area and specific gravity of media which were measured directly were 1,428 $mm^2$ and 45.3 $kg/m^3$ respectively. From the image analyses of the oil droplets photographs which were taken by using microscope, it was proved clearly that the coalescence was the main pathway in the removal of oil from the runoff. Finally, the performances of the non-point source control system filled up with the media were suspended solid $86.6\sim95.2%$, $COD_{Cr}$, $87.3\sim95.4%$, n-Hexane extractable materials $71.8\sim94.8%$ respectively.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.3
• /
• pp.267-278
• /
• 1986

The evolution of Korean fish fermentation technology was reviewed from the old literatures and the on-going processes were surveyed. The principles involved in the traditional fermentation methods were explained by the recent scientific findings. The fish fermentation technology be classified into two groups; jeot-kal process, where. salt is the only material added to the fish for fermentation, and sik-hae process, where cooked cereals, garlic and red pepper powder are added to the salted fish. A total of 46 kinds of jeot-kal was identified in a survey, depending on the raw materials used. The characteristic feature of Korean jeot-kal process is to produce fermented products which still has original shape after 2-3 months of fermentation to be used for side-dishes of rice meal, as well as fish sauce by keeping these products for longer time (over 6 months) for severe ansymematic hydrolysis to be used for the subingredient of Kimchi (Korean fermented vegetable food). The taste of jeot-kal is formed by the protein hydrolymates due to the action of salt-tolerant Pediococcus, Bacillus, Halobacterlum etc. When the taste of jeot-kal deteriorates, yeasts appear to dominate. In ski-hae fermentation, the safety of preserved fish is kept by the rapid decrease in pH resulting from the acid fermentation of added cereals. The roles of cid forming bacteria and proteloytic bacteria are important. The fermentation is completed in 2 weeks and the excess production of acid during prolonged storage limits the taste acceptability. The fish fermentation technology in Korea stands at important position in Korean food science and technology. since the processes of jeot-kal and soysauce have same root in the principle of microbial proteolysis and the processes of sik-hae and Kimchi in the microbial acid production principles.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.645-650
• /
• 2011

Pear cultivar 'Supergold' (Pyrus pyrifolia var. culta Nakai) was originated from the cross between 'Chuwhangbae' and 'Manpungbae' with the aims of improving the fruit quality of 'Chuwhangbae' cultivar at Pear Research Station of National Institute of Horticultural & Herbal Science, Rural Development Administration in 1994. 'Supergold' was preliminarily selected in 2002 and named in 2008. The tree shows a vigorous growth habit and semi-spread characters like as 'Manpungbae'. Furthermore, it has sufficient flowers and carries abundant pollen grains, so it can also be used as a pollinator. 'Supergold' is highly resistant to black leaf spot (Alternaria kikuchiana) in the field condition. The optimum harvest time is around Sep. 11th, which is ahead of 'Whangkeumbae' about 5 days in the harvest period. The fruit shape is oblate and fruit skin color is greenish-white at harvesting time. The average weight of fruit is 570 g, and the soluble solids content is $13.6\;^{\circ}Brix$. The flesh is very soft and juicy, and renders good eating quality. Shelf life is about 6 months under the cold storage condition. To determine the self-incompatibility (SI) genotype of 'Supergold' pear cultivar, it was crossed with other cultivars of which SI genotypes have already known. The result of cross-pollinations of 'Supergold' with other cultivars showed relatively high rates of fruit set from 64.5% to 91.0%, except for the cross with pollens of 'Nijisseiki' that represented only 28.8% of fruiting rate. Although sometimes the stigma of 'Supergold' crossed with 'Hayatama', 'Chojuro', and 'Nijisseiki' showed malformed pollen tube tips, 'Supergold' is generally supposed to have cross-compatibility with all other pollen donor cultivars. It is considered that the S-allele of 'Supergold' is $S_3S_4$, which is based on the result of PCR-RFLP.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.171-178
• /
• 2008

Metal filter elements were newly introduced to the high temperature filter(HTF) system in the low- and intermediate-level radioactive waste vitrification plant. In order to evaluate the performance of various metal materials as filter media, elements made of AISI 316L, AISI 904L, and Inconel 600 were included to the test set of filter elements. At the visual inspection to the elements performed after completion of each test, a few dark spots were observed on the surface of some elements. Especially they were found much more at the AISI 316L elements than others. To check the dark spots are the corrosion phenomena or not, two kinds of analyses were performed to the tested filter elements. Firstly, the surfaces or the cross sections of filter specimens cut out from both normal area and dark spot area of elements were analyzed by SEM/EDS. The results showed that the dark spots were not evidences of corrosion but the deposition of sodium, sulfur and silica compounds volatilized from waste or molten glass. Secondly, the ring tensile strength were analyzed for the ring-shape filter specimens cut out from each kind of element. The result obtained from the strength tested showed no evidence of corrosion as well. Conclusionally, depending on the two kinds of analysis, no evidences of corrosion were found at the tested metal filter elements. But the dark spots formed on the surface could reduce the effective filtering area and increase the overall pressure drop of HTF system. Thus, continuous heating inside filter housing up to dew point will be required normally. And a few long-period test should be followed for the exact evaluation of corrosion of the metal filter elements.

• Current Research on Agriculture and Life Sciences
• /
• v.9
• /
• pp.1-9
• /
• 1991

Bulbs of two introduced garlic cultivars, Sanghae-joseng and Spain strain, were purchased in a market and anatomical characteristics of them were investigated according to the weight of individual bulbs. The materials used were planted and grown in the field. Bulbs harvested were classified according to weight and their anatomical characteristics were recorded. 1. In both cultivars the larger the bulb, the more flat the bulb shape. 2. The bigger the bulbs were, the larger the number of cloves per bulb was, Spain strain had more cloves per bulb than Sanghae-joseng in the same size bulbs. 3. In Sanghae-joseng, more cloves were formed in outer layer than in inner layer in the bulbs produced in 1990. But more cloves were formed in inner layer in the bulbs of 35 g or smaller produced in 1991. In Spain strain, more cloves were formed in inner layer in the bulbs of 40 g or more produced in 1990. But more cloves were formed in outer layer in the bulbs produced in 1991 regardless of bulb size. In both cultivars, the number of primary cloves and total number of cloves was very small in both cultivars, but it was a little bigger in Sanghae-joseng than in spain strain. 5. In the bulbs produced in both 1990 and 1991 of Spain strain and in bulbs produced in 1990 of Sanghae-joseng weight of cloves in outer layer was significantly heavier than that in outer layer, the trend was not conspicuous in 1991 produce of Sanghae-joseng. 6. In both cultivars clove size range was narrow in small bulbs and wide in large bulbs. In distribution of cloves in size, medium ones were most frequent, and the frequency of large cloves increased with increased size of bulbs. Sanghae-joseng produced larger cloves than Spain strain in the same size cloves.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.4
• /
• pp.233-250
• /
• 1970

The present paper deals with the results of the observations on the characteristics of the eggs being ripen by injection of synahorin and the larvae of the black porgy. Mylio macrocehalus (Basilewsky). The adult fish used in the experiments, during May 11th to June 5th, 1970, were obtained from a fish-farm of the Atsumi Fish Culture Company in Aichi Prefecture, Japan, The results obtained are as follows: 1. The egg is colorless and buoyant, spherical in shape, measuring from $0.81\~0.96\;mm$ in dia-meter with a single oil globule, measuring $0.20\~0.23\;mm$. 2. Hatching took place within about 35 hours and 50 minutes after insemination of eggs at the water temperature $19.6\~22.5^{\circ}C$ (Mean, $20.6^{\circ}$). 3. The newly hatched larvae were 1.57 mm in total length, with the oil globule situated at the posterior part of the elongated oval-shaped yolk sac. Melanophores and xanthophores were distributed on the middle of the caudal region, and were scattered on the surface of the oil globule, but none on the yolk sac. 4. The diameter of the eggs ill each adult is distinguished into two types, large and small. The former is in the range of $0.811\~0.873\;mm$, the latter is $0.874\~0.963\;mm$. 3. The hatching rate of black porgy was in the range of $78.63\~95.19\%$ in large and $68.84\~74.80\%$ in small eggs. The mean hatching rate of total eggs was $79.80\%$. 6. The optimum temperature of hatching black porgy is in the range of $20\~26^{\circ}C$. The highest temperature limit of hatching the black porgy is from $26.71\~28.56^{\circ}C$. 7. The total length of hatched larvae is not maintained pararell to diameter of eggs and total length of the large larvae is from $1.976\~2.225mm$, and that of small larvae is $1.526\~1.90mm$. 8. The diameter of yolk sac of black porgy is in the range of $0.878\~0.979\;mm$ 9. The initial survived larva of the black porgy was $13.71\%$ in minimum, and $79\%$ in maximam. And the mean initial survived rate was $48.3\%$. 10. In conclusion, the biological characteristics of hatched larva of black porgy is seemed to be possible for large scale production of artificial seedlings. But experimental results make initial food the prime object believed to be supplemented.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.147-153
• /
• 2005

Purpose : We should use a computed tomography-simulator for the body measure and compensator manufacture process was practiced with TBI's positioning in process and to estimate the availability.,Materials and Methods : Patient took position that lied down. and got picture through computed tomography-simulator. This picture transmitted to Somavision and measured about body measure point on the picture. Measurement was done with skin, and used the image to use measure the image about lungs. We decided thickness of compensator through value that was measured by the image. Also, We decided and confirmed position of compensator through image. Finally, We measured dosage with TLD in the treatment department.,Results : About thickness at body measure point. we could find difference of $1{\sim}2$ cm relationship general measure and image measure. General measure and image measure of body length was seen difference of $3{\sim}4$ cm. Also, we could paint first drawing of compensator through the image. The value of dose measurement used TLD on head, neck, axilla, chest(lungs inclusion), knee region were measured by $92{\sim}98%$ and abdomen, pelvis, inquinal region, feet region were measured by $102{\sim}109%$.,Conclusion : It was useful for TBI's positioning to use an image of computed tomography-simulator in the process. There was not that is difference of body thickness measure point, but measure about length was achieved definitely. Like this, manufacture of various compensator that consider body density if use image is available. Positioning of compensator could be done exactly. and produce easily without shape of compensator is courted Positioning in the treatment department could shortened overall $15\{sim}20$ minute time. and reduce compensator manufacture time about 15 minutes.