• Journal of Information Processing Systems
• /
• 제11권2호
• /
• pp.266-279
• /
• 2015

In this paper, we propose a novel block cipher mode of operation, which is known as the counter chain (CC) mode. The proposed CC mode integrates the cipher block chaining (CBC) block cipher mode of operation with the counter (CTR) mode in a consistent fashion. In the CC mode, the confidentiality and authenticity of data are assured by the CBC mode, while speed is achieved through the CTR mode. The proposed mode of operation overcomes the parallelization deficiency of the CBC mode and the chaining dependency of the counter mode. Experimental results indicate that the proposed CC mode achieves the encryption speed of the CTR mode, which is exceptionally faster than the encryption speed of the CBC mode. Moreover, our proposed CC mode provides better security over the CBC mode. In summary, the proposed CC block cipher mode of operation takes the advantages of both the Counter mode and the CBC mode, while avoiding their shortcomings.

• 대한방사선치료학회지
• /
• 제20권1호
• /
• pp.17-23
• /
• 2008

목 적: 선형가속기에 부착된 온보드영상장치(On-Board Imager)를 이용한 콘빔CT (Cone Beam Computerized Tomography)는 환자의 셋업 오차 확인 및 보정, 장기 및 표적의 움직임 확인이 용이한 장점이 있는 영상유도방사선 치료 장비이다. 하지만 촬영 시 받게 되는 imaging dose는 2차 암 발생위험의 원인이 된다. 이에 본 저자는 촬영조건(mAs)을 변화시킨 4가지 촬영 mode로 피부선량과 영상 품질을 비교 평가하여 적정한 촬영 mode를 제시하고자 한다. 대상 및 방법: 인체 모형 팬톰(RANDO phantom)을 사용하여 열형광선량계(TLD-100, Harshaw)를 두부, 흉부, 복부로 나누어 각 부위별로 8개씩 위치시킨 후 4가지의 촬영 mode (A: 125 kvp 80 mA 25 ms, B: 125 kvp 40 mA, 25 ms, C: 125 kvp 80 mA 10 ms, D: 125 kvp 40 mA, 10 ms)로 피부선량(skin dose)을 각각 3회씩 측정한 후 그 평균값을 얻어 평가하였고 catphan 504 phantom을 이용하여 장비 제조사의 영상 품질 정도관리 protocol에 따라서 각 촬영 mode 별 영상품질(image quality)을 비교 분석하였다. 결 과: 피부선량을 측정한 결과 두부에서는 A mode: 8.96 cGy, B mode: 4.59 cGy, C mode: 3.46 cGy, D mode: 1.76 cGy였고, 흉부는 A mode: 9.42 cGy, B mode: 4.58 cGy, C mode: 3.65 cGy, D mode: 1.85 cGy가 복부에서는 A mode: 9.97 cGy, B mode: 5.12 cGy, C mode: 4.03 cGy, D mode: 2.21 cGy의 값으로 측정이 되었다. 이는 A mode를 기준으로 약 B mode는 50%, C mode 60%, D mode는 80%의 선량 감소를 나타내었다. 영상품질 평가 항목인 HU reproducibility, Low contrast resolution, Spatial resolution (high contrast resolution), HU uniformity를 분석한 결과 모든 촬영mode에서 장비제조사에서 제시하는 tolerance 이내의 값으로 평가되었다. 결 론: 콘빔CT에 있어서 좋은 영상품질을 유지하면서 imaging dose를 줄이는 것은 중요하다. 이에 본 실험결과를 바탕으로 하여 soft tissue가 관심영역일 경우는 A mode로 두부 촬영 시 bone이 관심영역일 경우 D mode가 일반적인 경우에는 B, C mode가 적용 가능하리라 생각된다. 또한 콘빔CT촬영으로 인해 증가되는 2차 암 발생위험은 낮은 mAs의 촬영조건을 선택함으로써 줄일 수 있을 것이다.

• 한국동물학회지
• /
• 제39권3호
• /
• pp.282-291
• /
• 1996

한국 휘파람새(Cettia diphone)의 song은 더입부인 whistle부와 종결부인 syllable 의 두 부분으로 구성되며, 그들의 song은 도입부에 나타나는 note의 수에 따라서 2개 이하인 것은 $\alpha$ song mode로 3개 이상으로 구성되어지는 song은 $\beta$ song mode로 분류된다. 개체와 지역에 따라서 차이는 있지만 한 개체가 부르는 전채 song에서 $\alpha$ song mode가 차지하는 비율은 약 55%(51.5-58.7%)이었다. $\alpha$ mode는 $\beta$ mode에 비하여 whistle 부분의 dominant frequency는 높은 반면에, syllable 부분을 구성하는 syllable들의 수는 상대적으로 적었다. 휘파람새의 mode Sequence는 그들의 출현 순서에 따라서 $\alpha$$\alpha$, $\alpha$$\beta$, $\beta$$\alpha$, $\beta$$\beta$의 네가지로 정의되었다. 휘파람새의 지리적 변이 그룹인 south-coastal 그룹 내의 개체군집인 완도와 제주도에 있어서 song mode와 mode Sequence는 그들의 텃세권의 방어를 위하여 역할을 수행할 수 있다는 가설을 세우고 이를 검증하기 위하여 playback 실험을 수행하였다. 실험의 결과 mode Sequence는 실험전 자연 상태에서 녹음되어진 song과 playback의 실험 중에 녹음되어진 song과는 실험이 실시된 두 지역 모두에 있어서 의미 있는 차이를 나타내었다. 특히, 완도의 군집에서의 결과는 song mode의 사용이 서식지, singing site, 텃세권의 공간적인 형태에 따라 영향을 받는다는 것을 나타낸다. 나아가 song을 통한 텃세권의 방어에 있어서 특정의 mode sequence는 song mode 자체보다 더 중요한 역할을 할 수도 있을 것으로 생각된다.

• STI Policy Review
• /
• 제8권2호
• /
• pp.23-48
• /
• 2017

This article advocates for a Mode 3 science policy. Compared to the university research-based Mode 1 knowledge production system and the knowledge application-centric Mode 2 innovation system, Mode 3 can be defined as a system that integrates both Mode 1 and Mode 2-type knowledge production models. In this article, based on the major characteristics of the Mode 3 scientific knowledge production system, I agree with the advocates of Mode 3 that constructing a knowledge society requires an inclusive form of knowledge production and innovation system through the democratization of knowledge production as well as the promotion of social values. Moreover, the mechanisms for creating accountable innovation in the Mode 3 system should be given more attention from the science research and policy communities to make public policy for scientific and technological innovation more reflective of social changes. Similar to the ways that the Mode 1 and Mode 2 scientific knowledge production approaches have influenced the development of science policy models, the Mode 3 scientific knowledge production approach, or Mode 3 science, also has the potential to shape a new science policy model. I will refer to this as Mode 3 science policy. In an effort to conceptualize the democracy- and society-centric Mode 3 science policy model, I will articulate science policy strategies in four science policy domains in South Korea from the context of the Mode 3 science approach. These include (1) evaluation of publicly-funded research activities, (2) valorization of scientific knowledge (that is, enhancement of the value of scientific knowledge through governmental action), (3) development of a science policy decision-making support system, and (4) anticipatory foresight of science, technology and society. When adopting and implementing a Mode 3 science framework, one progressive change is to increase socially desirable innovation such as responsible innovation.

• ETRI Journal
• /
• 제28권4호
• /
• pp.425-434
• /
• 2006

We propose a fast macroblock mode prediction and decision algorithm based on contextual information for Pslices in the H.264/AVC video standard, in which the mode prediction part is composed of intra and inter modes. There are nine $4{\times}4$ and four $16{\times}16$ modes in the intra mode prediction, and seven block types exist for the best coding gain based on rate-distortion optimization. This scheme gives rise to exhaustive computations (search) in the coding procedure. To overcome this problem, a fast inter mode prediction scheme is applied that uses contextual mode information for P-slices. We verify the performance of the proposed scheme through a comparative analysis of experimental results. The suggested mode search procedure increased more than 57% in speed compared to a full mode search and more than 20% compared to the other methods.

• 정보통신설비학회논문지
• /
• 제10권4호
• /
• pp.135-142
• /
• 2011

This paper proposes a performance evaluation method for power consumption of set-top box (STB) stand-by mode transition schemes. A stand-by mode transition scheme characterizes the timing of mode transition. The timing of mode transition affects the duration of stand-by mode operation, and the power consumptions of STB as well. Recently a fast stand-by mode transition scheme (FMT) has been proposed based on user input for selecting the device to be connected to TV. In this paper, we evaluate power consumption of FMT and a conventional mode transition scheme. For the computation of the duration of stand-by mode operation, the user input events are modeled as Poisson process. Simulation results based on the modeling reveals that the proposed scheme is more effective in power saving than the conventional scheme by up to 30%.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.260-264
• /
• 2015

본 논문에서는 부하전류를 감지하여 스위칭 방식과 선형 방식의 레귤레이터를 동작하기 위한 mode selector를 제안한다. 제안된 mode selector는 선형 방식과 스위칭 방식으로의 모드 전환이 가능하며, 경부하 조건에서 낮은 효율을 갖는 스위칭 방식의 레귤레이터의 단점을 보완하고자 제안되었다. 경부하 조건에서는 선형 방식의 레귤레이터로 mode를 전환함으로써 경부하 상태에서도 높은 효율을 제공할 수 있다. 설계한 mode selector는 동부 하이텍의 $0.18{\mu}m$ CMOS 공정을 이용하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.567-570
• /
• 2005

Most researches on monostable LCD and bistable LCD have separately been carried out. We introduce a novel liquid crystal display mode which can be operated as both memory mode and dynamic mode. The novel LCD mode has not only a long term memory time of memory mode but also a fast response time of dynamic mode. We describe switching characteristics of dual mode. Electro-optical characteristics of memory mode and dynamic mode are unique and show the possibility of device application.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.90-96
• /
• 2009

The loading condition of actual construction works is complex. The shear effect of mixed-mode load component are crack propagation mechanism in step larger than the crack initial mechanism. Therefore, in this study received a mixed-mode loading on fatigue crack stress ratio on crack propagation path and speed of progress to learn whether stress affects crack propagation. ${\Delta}$ P a constant state of fatigue tests in Mode I, II give the same stress ratio, frequency 10Hz, sinusoidal waveform was used. A lower stress ratio fatigue crack propagation angle is small. This is less affected by the Mode II. Therefore, a mixed-mode fatigue crack propagation is to progress by the Mode. Stress ratio in a mixed mode crack in the path of progress and found a lot of impact.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.813-831
• /
• 2011

This paper presents an efficient version of Hilbert-Huang transform for nonlinear non-stationary systems analyses. An ensemble empirical mode decomposition (EEMD) is introduced to alleviate the problem of mode mixing between intrinsic mode functions (IMFs) decomposed by EMD. Yet the problem has not been fully resolved when a signal of a similar scale resides in different IMF components. Instead of using a trial and error method to select the "best" outcome generated by EEMD, a hybrid algorithm based on EEMD and EMD is proposed for multi-mode signal processing. The developed approach comprises the steps from a bandpass filter design for regrouping modes of the IMFs obtained from EEMD, to the mode extraction using EMD, and to the assessment of each mode in the marginal spectrum. A simulated two-mode signal is tested to demonstrate the efficiency and robustness of the approach, showing average relative errors all equal to 1.46% for various noise levels added to the signal. The developed approach is also applied to a real bridge structure, showing more reliable results than the pure EMD. Discussions on the mode determination are offered to explain the connection between modegrouping form on the one hand, and mode-grouping performance on the other.