• Journal of Information Processing Systems
• /
• v.11 no.2
• /
• pp.266-279
• /
• 2015

In this paper, we propose a novel block cipher mode of operation, which is known as the counter chain (CC) mode. The proposed CC mode integrates the cipher block chaining (CBC) block cipher mode of operation with the counter (CTR) mode in a consistent fashion. In the CC mode, the confidentiality and authenticity of data are assured by the CBC mode, while speed is achieved through the CTR mode. The proposed mode of operation overcomes the parallelization deficiency of the CBC mode and the chaining dependency of the counter mode. Experimental results indicate that the proposed CC mode achieves the encryption speed of the CTR mode, which is exceptionally faster than the encryption speed of the CBC mode. Moreover, our proposed CC mode provides better security over the CBC mode. In summary, the proposed CC block cipher mode of operation takes the advantages of both the Counter mode and the CBC mode, while avoiding their shortcomings.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.17-23
• /
• 2008

Purpose: Cone-beam CT using linear accelerator attached to on-board imager is a image guided therapy equipment. Because it is to check the patient's set-up error, correction, organ and target movement. but imaging dose should be cause of the secondary cancer when taking a image. The aim of this study is investigation of appropriate cone beam CT scan mode to compare and estimate the image quality and skin dose. Materials and Methods: Measurement by Thermoluminescence dosimeter (TLD-100, Harshaw) with using the Rando phantom are placed on each eight sites in seperately H&N, thoracic, abdominal section. each 4 methods of scan modes of are measured the for skin dose in three time. Subsequently, obtained average value. Following image quality QA protocol of equipment manufacturers using the catphan 504 phantom, image quality of each scan mode is compared and analyzed. Results: The results of the measured skin dose are described in here. The skin dose of Head & Neck are measured mode A: 8.96 cGy, mode B: 4.59 cGy, mode C: 3.46 cGy mode D: 1.76 cGy and thoracic mode A: 9.42 cGy, mode B: 4.58 cGy, mode C: 3.65 cGy, mode D: 1.85 cGy, and abdominal mode A: 9.97 cGy, mode B: 5.12 cGy, mode C: 4.03 cGy, mode D: 2.21 cGy. Approximately, dose of mode B are reduced 50%, mode C are reduced 60%, mode D are reduced 80% a point of reference dose of mode A. the results of analyzed HU reproducibility, low contrast resolution, spatial resolution (high contrast resolution), HU uniformity in evaluation item of image quality are within the tolerance value by recommended equipment manufacturer in all scan mode. Conclusion: Maintaining the image quality as well as reducing the image dose are very important in cone beam CT. In the result of this study, we are considered when to take mode A when interested in soft tissue. And we are considered to take mode D when interested in bone scan and we are considered to take mode B, C when standard scan. Increasing secondary cancer risk due to cone beam CT scan should be reduced by low mAs technique.

• The Korean Journal of Zoology
• /
• v.39 no.3
• /
• pp.282-291
• /
• 1996

The song of the bush warbler, Cettia diphone, consists of an introdudory whisde portion and a complex ending syllable portion. In bush warbiers, a song with two or fewer notes in the whistle portion is classified as an a song mode, while a song with three or more notes in the whistle portion as a $\beta$ song mode. Although some variations occur in mode seledion by individuals and populations, the proportion of a mode songs to total songs is 55% (range 51.6-58.7%) on average. The a mode has a higher dominant frequency in the whistle portion than does the $\beta$ mode, but the number of syllables m the complex ending syllable portion is fewer. Bush warbler mode sequences are defined as $\alpha$$\alpha$, $\alpha$$\beta$, $\beta$$\alpha$ and $\beta$$\beta$ mode sequences. In order to test the hypothesis that song modes and mode sequences play a role in the defence of territory in Jeju and Wando populations in the south-coastal geographic song variation group, playback experiments were executed. Mode sequences differed between naturally produced songs and songs produced in response to playback for two populations. In particular, for birds in the Wando populations our results indicate that the use of song modes may be affeded by habitat, singing site and type of territory, and further propose that particular mode sequences may play a more important role than song mode in vocal interadions.

• STI Policy Review
• /
• v.8 no.2
• /
• pp.23-48
• /
• 2017

This article advocates for a Mode 3 science policy. Compared to the university research-based Mode 1 knowledge production system and the knowledge application-centric Mode 2 innovation system, Mode 3 can be defined as a system that integrates both Mode 1 and Mode 2-type knowledge production models. In this article, based on the major characteristics of the Mode 3 scientific knowledge production system, I agree with the advocates of Mode 3 that constructing a knowledge society requires an inclusive form of knowledge production and innovation system through the democratization of knowledge production as well as the promotion of social values. Moreover, the mechanisms for creating accountable innovation in the Mode 3 system should be given more attention from the science research and policy communities to make public policy for scientific and technological innovation more reflective of social changes. Similar to the ways that the Mode 1 and Mode 2 scientific knowledge production approaches have influenced the development of science policy models, the Mode 3 scientific knowledge production approach, or Mode 3 science, also has the potential to shape a new science policy model. I will refer to this as Mode 3 science policy. In an effort to conceptualize the democracy- and society-centric Mode 3 science policy model, I will articulate science policy strategies in four science policy domains in South Korea from the context of the Mode 3 science approach. These include (1) evaluation of publicly-funded research activities, (2) valorization of scientific knowledge (that is, enhancement of the value of scientific knowledge through governmental action), (3) development of a science policy decision-making support system, and (4) anticipatory foresight of science, technology and society. When adopting and implementing a Mode 3 science framework, one progressive change is to increase socially desirable innovation such as responsible innovation.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.425-434
• /
• 2006

We propose a fast macroblock mode prediction and decision algorithm based on contextual information for Pslices in the H.264/AVC video standard, in which the mode prediction part is composed of intra and inter modes. There are nine $4{\times}4$ and four $16{\times}16$ modes in the intra mode prediction, and seven block types exist for the best coding gain based on rate-distortion optimization. This scheme gives rise to exhaustive computations (search) in the coding procedure. To overcome this problem, a fast inter mode prediction scheme is applied that uses contextual mode information for P-slices. We verify the performance of the proposed scheme through a comparative analysis of experimental results. The suggested mode search procedure increased more than 57% in speed compared to a full mode search and more than 20% compared to the other methods.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.4
• /
• pp.135-142
• /
• 2011

This paper proposes a performance evaluation method for power consumption of set-top box (STB) stand-by mode transition schemes. A stand-by mode transition scheme characterizes the timing of mode transition. The timing of mode transition affects the duration of stand-by mode operation, and the power consumptions of STB as well. Recently a fast stand-by mode transition scheme (FMT) has been proposed based on user input for selecting the device to be connected to TV. In this paper, we evaluate power consumption of FMT and a conventional mode transition scheme. For the computation of the duration of stand-by mode operation, the user input events are modeled as Poisson process. Simulation results based on the modeling reveals that the proposed scheme is more effective in power saving than the conventional scheme by up to 30%.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.260-264
• /
• 2015

In this paper, we propose mode selector for operating a switching system and regulator of linear system to detect the load current. The proposed mode selector can be a mode switching of linear system and switching system, and it has been proposed to compensate for the disadvantages of regulator of switching system with low efficiency in light load conditions. At light load conditions, the mode selector is possible to provide a high efficiency in light load condition by switching the mode to the regulator of linear system. The mode selector was designed to using a Dongbu Hitek $0.18{\mu}m$ CMOS process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.567-570
• /
• 2005

Most researches on monostable LCD and bistable LCD have separately been carried out. We introduce a novel liquid crystal display mode which can be operated as both memory mode and dynamic mode. The novel LCD mode has not only a long term memory time of memory mode but also a fast response time of dynamic mode. We describe switching characteristics of dual mode. Electro-optical characteristics of memory mode and dynamic mode are unique and show the possibility of device application.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.90-96
• /
• 2009

The loading condition of actual construction works is complex. The shear effect of mixed-mode load component are crack propagation mechanism in step larger than the crack initial mechanism. Therefore, in this study received a mixed-mode loading on fatigue crack stress ratio on crack propagation path and speed of progress to learn whether stress affects crack propagation. ${\Delta}$ P a constant state of fatigue tests in Mode I, II give the same stress ratio, frequency 10Hz, sinusoidal waveform was used. A lower stress ratio fatigue crack propagation angle is small. This is less affected by the Mode II. Therefore, a mixed-mode fatigue crack propagation is to progress by the Mode. Stress ratio in a mixed mode crack in the path of progress and found a lot of impact.

• Structural Engineering and Mechanics
• /
• v.39 no.6
• /
• pp.813-831
• /
• 2011

This paper presents an efficient version of Hilbert-Huang transform for nonlinear non-stationary systems analyses. An ensemble empirical mode decomposition (EEMD) is introduced to alleviate the problem of mode mixing between intrinsic mode functions (IMFs) decomposed by EMD. Yet the problem has not been fully resolved when a signal of a similar scale resides in different IMF components. Instead of using a trial and error method to select the "best" outcome generated by EEMD, a hybrid algorithm based on EEMD and EMD is proposed for multi-mode signal processing. The developed approach comprises the steps from a bandpass filter design for regrouping modes of the IMFs obtained from EEMD, to the mode extraction using EMD, and to the assessment of each mode in the marginal spectrum. A simulated two-mode signal is tested to demonstrate the efficiency and robustness of the approach, showing average relative errors all equal to 1.46% for various noise levels added to the signal. The developed approach is also applied to a real bridge structure, showing more reliable results than the pure EMD. Discussions on the mode determination are offered to explain the connection between modegrouping form on the one hand, and mode-grouping performance on the other.