• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1175-1180
• /
• 2009

Frame Aggregation is a promissing technology for improving MAC throughput in IEEE 802.11n. In IEEE 802.11n, two frame aggregation schemes, Aggregate MSDU (A-MSDU) and Aggregation MPDU (A-MPDU), are defined. In this paper, we analyze the performance the two-level frame aggregation scheme where A-MSDU and A-MPDU are combined. We develop the analytical model for the two-level frame aggregation scheme and present numerical results on the effect of bit error rate, aggregation size, and the number of nodes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.473-476
• /
• 2009

Frame Aggregation is a promissing technology for improving MAC throughput in IEEE 802.11n. In IEEE 802.11n, two frame aggregation schemes, Aggregate MSDU (A-MSDU) and Aggregate MPDU (A-MPDU), are defined. In this paper, we analyze the performance the two-level frame aggregation scheme where A-MSDU and A-MPDU are combined. We develop the analytical model for the two-level frame aggregation scheme and present numerical results on the effect of bit error rate, aggregation size, and the number of nodes.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.509-515
• /
• 2005

This paper explores the throughput of DCF protocol with both the traffic intensity and MSDU size at the MAC layer in the 802.11a wireless LAN. By exploring the throughput of DCF protocol with the data rate of 6Mbps, 12 Mbps, 24 Mbps and 54 Mbps, we find the fact that the less the data rate be, the higher the throughput be. We also find, from the throughput calculation by means of traffic intensity and MSDU size, that the longer the MSDU size is, the higher the throughput is. We also found the traffic intensity that the throughput is at the maximum point with the fixed MSDU size.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.300-309
• /
• 2015

In IEEE 802.11n WLANs(Wireless Local Area Networks), to support high throughput, MAC(Media Access Control) layer adopts A-MSDU(Aggregate-MAC Service Data Unit) and A-MPDU(Aggregate-MAC Protocol Data Unit). Generally, as the A-MPDU uses a selective retransmission capability, A-MPDU provides higher throughput than A-MSDU. However, although A-MPDU uses the selective re-transmission capability, if the size of MPDU within A-MPDU is smaller than the size of minimum MPDU starting spacing, A-MPDU can reduce throughput because of the overhead of retransmission owing to the addition of delimiter, that is a dummy MPDU. Therefore, to overcome the above problem, two-level Aggregation method, where the small MPDU within A-MPDU is replaced by not delimiter but A-MSDU, has been introduced. In the two-level Aggregation method, the existing re-transmission scheme retransmits only A-MPDU, but if the size of retransmission data is smaller than the size of the minimum MPDU starting spacing, the proposed retransmission scheme retransmits the aggregated retransmission data and MSDUs. Therefore, we know that the proposed retransmission scheme have better throughput that the existing retransmission scheme.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.485-490
• /
• 2010

IEEE 802.11n supports two frame aggregation schemes, aggregation for MAC service data unit (A-MSDU) and aggregation for MAC protocol data unit (A-MPDU), to improve throughput at the MAC layer. In this paper, we propose a cooperative frame aggregation (CoFA), which can recover erroneous frames in a cooperative manner based on A-MPDU. Specifically, CoFA receive multiple frames from direct and relay paths, and combined multiple frames jointly. Numerical results show that CoFA outperforms direct transmission and relay transmission over diverse channel conditions.

• Journal of Korea Multimedia Society
• /
• v.17 no.5
• /
• pp.573-581
• /
• 2014

The salient features of UWB(Ultra WideBand) networks such as high-rate communications, low interference with other radio systems, and low power consumption bring many benefits to users, thus enabling several new applications such as wireless universal serial bus (WUSB) for connecting personal computers (PCs) to their peripherals and the consumer-electronics (CE) in people's living rooms. Because the size of multimedia data frame, WiMedia device must transmit the fragment of MSDU. However, when the fragment of MSDU is lost, WiMedia device maintains active mode for the time to complete the transmission MSDU, and there is a problem that unnecessary power consumption occurs. Therefore we propose new power management scheme to reduce unnecessary power consumption of WiMedia devices in the case that the fragment is lost.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.39-47
• /
• 2009

This paper presents implementation of two types of the 802.11 MAC engine for the next generation WLAN, 802.11n. The first version of MAC engine consists of hardwired logic and embedded firmware. Hardwired logic includes Tx block, Rx block, Backoff block, and ChannelManage block. Embedded firmware contains Protocol Control block, MLME block, and MSDU processing block. The first version has a time-critical fault during the atomic transmission caused by software overhead, so it can not be applied to 802.11n MAC. For that reason, the second version has additional blocks with hardwired logic modules to reduce software overhead of the first version. This enhanced version has 73Mbps throughput and it is expected to be further improved up to 129 Mbps with frame aggregation which is one of the key additional features of 802.11n. As a result, the second version of MAC engine can be applied to 802.11n MAC.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.174-180
• /
• 2010

Automatic Repeat reQuest (ARQ) is a very effective technique against transmission error at the medium access control (MAC) layer. An erroneous MAC protocol data unit can be typically retransmitted within a given limit. In order to improve the IP-level performance, which directly affects the user-perceived quality-of-service (QoS), we propose a new truncated ARQ strategy, called MAC service data unit-based ARQ (S-ARQ), where the finite number of opportunities for retransmissions are shared by multiple fragments out of an IP datagram. We describe how SARQ can be implemented in a practical system, and then propose another variant of S-ARQ employing a functionality called early detection of failure. Basically, we evaluate the performance of SARQ in two different manners. First, assuming i.i.d. error process, we analyze both the probability of the delivery failure and the average delay of IP datagram. Then, we assess the performance of S-ARQ via simulation over a 2-state Markov channel.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1706-1715
• /
• 2016

In this paper, a single phase modified switched-diode topology for both symmetrical and asymmetrical cascaded multilevel inverters is presented. It consists of a Modified Switched-Diode Unit (MSDU) and a Twin Source Two Switch Unit (TSTSU) to produce distinct positive voltage levels according to the operating modes. An additional H-bridge synthesizes a voltage waveform, where the voltage levels of either polarity have less Total Harmonic Distortion (THD). Higher-level inverters can be built by cascading MSDUs. A comparative analysis is done with other topologies. The proposed topology results in reductions in the number of power switches, losses, installation area, voltage stress and converter cost. The Nearest Level Control (NLC) technique is employed to generate the gating signals for the power switches. To verify the performance of the proposed structure, simulation results are carried out by a PSIM under both steady state and dynamic conditions. Experimental results are presented to validate the simulation results.