• Korean Journal of Environmental Biology
• /
• v.33 no.1
• /
• pp.83-91
• /
• 2015

This study is measured the change of chlorophyll-${\alpha}$ concentration and phytoplankton density, the grazing rates (GR) and pseudofaeces production (PFP), by grazing of freshwater apple snail, Pomacea canaliculata, to investigated that the snails are able to control of phytoplankton bloom. The experiments are performed to evaluate the GR and PFP at different conditions such as incubation time (0, 2, 4, 6, 8, 10 and 12 hr), shell height (1.0 to 4.0 cm, n=108), snail density (1, 1.5, 2.5, 3.5 and 5 indiv. $L^{-1}$) and food concentration (200, 400, 600, 800 and $1000{\mu}g$ $L^{-1}$). Regarding feeding time, the highest GR (2.5 L. $gAFDW^{-1}h^{-1}$) and PFP (15.3 mg $AFDW^{-1}$) showed at 4 hr after snail stocking, respectively. The snail, smaller than 1.5 cm in body size, showed the highest of GRs (2.54 L. $gAFDW^{-1}h^{-1}$) for the initial period (2 hr of stocking), compared to those greater than 1.5 cm, which showed a stable FR, higher than 0.099 L. $gAFDW^{-1}h^{-1}$. Upon snail density effect, the density of 5 indiv. $L^{-1}$ induced the most effective inhibition on phytoplankton biomass with the highest PFP. On the food concentration, the highest GR (0.54 L. $gAFDW^{-1}h^{-1}$) and PFP (8.5 mg $gAFDW^{-1}$) were induced at the level of $600{\mu}g$ $L^{-1}$, respectively. We checked that it is possible to control of phytoplankton bloom by the grazing of apple snail as well as Reeve. However, it required a through research for the remove of pseudofaeces and 2nd problem by the decomposition of the organic materals.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.2
• /
• pp.94-100
• /
• 1990

Yongchonppon, one of the native varities, is the highest clod resistant. For its practical use, feeding test has been implemented in the ordinary rearing and in the branch rearing 1987 through 1988. The results are summarized as follows. 1. The feeding of Yongchonppong at the 4th and 5th instar made 5% decrease in spring and 10% decrease of cocoon yield in autumn, respectively, while cocoon shell ratio was a little less and percentage of raw silk was a little high, as compared to the feeding of Kaeryangppong. 2. The feeding of Yongchonppong at the 4th instar only showed nearly same nearing result as the feeding of Kaeryangppon. 3. In case of the feeding of yongchonppong at the 4th instar and early stage of the 5th instar, cocoon yield and percentage of raw silk marked 96% and 97-98% of Kaeryangppong. 4. The total nitrogen and crude protein of Yongchonnppong was less, while the total carbohydrate, crude ash and crude fat were high, as compared to those of Kaeryangppong. It had more phosphate and boric and less manganese than Kaeryangppong. 5. The leaf aereal weight of Yongchonppong was 1.57g/dcm2 and the leaf thickness was 113$\mu$. The moisture reducing rate marked 41.3% after three hour exposure to the air.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.397-397
• /
• 2013

The electrical, electronic, optical properties and the local structure of Nickel Oxide (NiO) thin film have been investigated by X-ray photoelectron spectroscopy (XPS), Reflection Electron Energy Loss Spectroscopy (REELS), UV-spectrometer,Hall Effect measurement and X-ray absorption spectroscopy (XAS). The XPS results show that the Ni 2p spectra for all films consist of $Ni2p_{3/2}$ at around 854.5 eV which indicate the presence of Ni-O bond from NiO phase and for the annealed film at temperature above $200^{\circ}C$ shows the coexist Ni oxide and Ni metal phase. The REELS spectra showed that the band gaps of the NiO thin films were abruptly decreased with increasing temperature. The values of the band gaps are consistent with the optical band gaps estimated by UV-Spectrometer. The optical transmittance spectra shows that the transparency of NiO thin films in the visible light region was deteriorated with higher temperature due to existence of $Ni^0$. Hall Effect measurement suggest that the NiO thin films prepared at relatively low temperatures (RT and $100^{\circ}C$) are suitable for fabricating p-type semiconductor which showed that the best properties was achieved at $100^{\circ}C$, such as a low resistivity of $7.49{\Omega}.cm$. It can be concluded that the annealing process plays a crucial role in converting from p type to n type semiconductor which leads to reducing electrical resistivity of NiO thin films. Furthermore, the extended X-ray absorption fine structure (EXAFS) spectrum at the Ni K-edge was used to address the local structure of NiO thin films. It was found that the thermal treatments increase the order in the vicinity of Ni atom and lead the NiO thin films to bunsenite crystal structure. Moreover, EXAFS spectra show in increasing of coordination number for the first Ni-O shell and the bond distance of Ni-O with the increase of substrate temperature.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.236-246
• /
• 2014

Pesticide is used to protect the crops, but also become a cause of polluting the environment. Perform a risk assessment using physical and chemical properties, environmental fate and toxicity data in order to determine the pesticide registration. The aquatic model estimates pesticide concentrations in water bodies that result from pesticide applications to rice paddies and apple orchard. The used models are the PRZM, EXAMS and AGRO shell (PA5), Rice Water Quality Model (RICEWQ) and Screening Concentration In GROund Water (SCI-GROW). The residual concentration of water body was estimated using meteorological data, crop calendar and soil series of Korea. The chosen pesticides were butachlor, carbofuran, iprobenfos and tebuconazole. It has shown the potential that the RICEWQ is possible to predict residue level in water of butachlor and iprobenfos, because the maximum value in water monitoring data is lower than the peak concentration of the model, and the minimum value is lower than the average annual concentration of the model. But RICEWQ was insufficient to predict exposure concentrations in ground water. The estimated exposure concentrations of carbofuran in ground water is very higher than in surface water because of its low soil adsorption coefficient. Although tebuconazole were not detected in the water monitoring that means very low concentration, it is possible that the PA5 can be used to predict residue level in water.

• The Korean Journal of Pesticide Science
• /
• v.20 no.4
• /
• pp.312-318
• /
• 2016

This study investigated the reduction of residual pesticide in soil by using eight kinds of soil amendments such as shell, quick lime, dolomite, silicic acid, leaf mold, oil cake, bed soil and husk. A total of ten pesticides most frequently detected in agricultural soil were selected (azoxystrobin etc.) and soil amendments were treated in soils at a 2% application rate and incubated for 7 days. Pesticides were analyzed by HPLC-MS/MS with QuEChERS-based sample preparation procedure and pH was measured on 1, 3 and 7 days. This study showed that, soil amemdments were effective in reducing pesticides after 7days of incubation. Over 90% of azoxystrobin, cadusafos, chlorpyrifos, fluquinconazole, imidacloprid, isoprothiolane and procymidone were decomposed from soils amended with 2% quick lime, whereas the concentration of boscalid, dimethomorph and triycyclazole were not decreased. The soil pH increased to 12.8-12.9 in soil amended with quick lime, but other soil conditioners did not change the soil pH. Quick lime was particularly effective in reducing residual pesticides.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.44-54
• /
• 2018

Stress and fatigue of the distributor, an equipment of the high-pressure evaporator for the HRSG, were evaluated according to ASME Boiler & Pressure Vessel Code Section VIII Division 2. First, from the results of the piping system analysis model, reaction forces of the tubes connected to the distributor were derived and used as the nozzle load applied to the detailed analysis model of the distributor afterward. Next, the detailed model to analyze the distributor was constructed, the distributor being statically analyzed for the design condition with the steam pressure and the nozzle load. As a result, the maximum stress occurred at the bore of the horizontal nozzle, and the primary membrane stress at the shell and nozzle was found to be less than the allowable. Next, for the transient operating conditions given for the distributor, thermal analysis was performed and the structural analysis was carried out with the steam pressure, nozzle load, and thermal load. Under the transient conditions, the maximum stress occurred at the vertical downcomer nozzle, and of which fatigue life was evaluated. As a result, the cumulative usage factor was less than the allowable and hence the distributor was found to be safe from fatigue failure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.719-725
• /
• 2003

An experiment was conducted to study the requirement of calcium (Ca) and non-phytin phosphorus (NPP) in commercial broilers during starter phase. Seven hundred and twenty day-old Vencob male broiler chicks were randomly distributed into 144 stainless steel battery brooders, 5 birds in each. Four levels each of Ca (6, 7, 8, and 9 g/kg) and NPP (3, 3.5, 4, and 4.5 g/kg diet) were fed in a factorial design in a corn-soya basal diet. Levels of dicalcium phosphate and oyster shell grit were adjusted to obtain the desired levels of Ca and NPP. Each diet was fed ad libidum to chicks in 9 battery brooders from one d to 21 d of age. Body weight gain and feed intake were depressed (p<0.01) by increasing the dietary Ca level (8 and 9 g/kg) at lower levels of NPP (3 and 3.5 g/kg diet). The growth depression observed at lower NPP level was alleviated by reducing the Ca content to 6 g/kg diet. The tibia ash content and tibia breaking strength increased with increase in both Ca (>6 g/kg) and NPP (>3 g/kg) levels. The leg abnormality score decreased (p<0.01) with increase in NPP content in the diet at all levels of Ca tested. The serum Ca and inorganic P levels were increased with increase in the level of the respective mineral in the diet, but the serum concentration of Ca and P were inversely related to the level of NPP and Ca, respectively /kg diet. In general, the excretion of macro minerals (Ca, and P), and micro minerals {zinc (Zn), manganese (Mn), iron (Fe), and copper (Cu)} was significantly lower at lower levels of Ca and NPP tested (6 and 3 g/kg diet, respectively). The mineral excretion increased with increase in dietary Ca and NPP levels, more conspicuously at the disproportionate ratio of these minerals (>2:1, Ca and NPP). Similarly, the retention of Zn, Mn, and Fe in liver was significantly higher (p<0.01) at lower levels of Ca and NPP tested. Results from this study indicate that the commercial broilers do not require more than 3 g NPP and 6g Ca/kg diet during starter phase (up to 21 d of age) for optimum weight gain, feed efficiency and utilization of Ca, P, Zn, Mn, Fe and Cu. However, the requirements of these minerals for optimum bone mineralization were higher than the levels suggested above.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.133-139
• /
• 2016

The incubation time required for hatching of O. ocellatus were investigated through the processes of egg and embryonic developments by the dissecting microscopic and visual observations. And differences in ecological characteristics of the plankton mode of life or the benthic mode of life according to total numbers of the suckers on each short arm of the hatched juvenile larvae of O. ocellatus were studied by comparisons with other octopodidae species. Compared with the recent a few results reported by other researchers associated with the incubation time required for hatching by female adult mother of O. minor (73-90 days after spawning at $20.9-21.5^{\circ}C$ ranges), in this study, the incubation time required for hatching by female adult mother of O. ocellatus was 56-57 days after spawning at $11.0-20.4^{\circ}C$. Therefore, the incubation time required for hatching by female adult mother varied with Octopodidae species. In this studies, each ovarian egg laid by a female was connected to an egg string attaching to the surface of the wall or bottom of vacunt shell of Rapana venosa. Egg and embryonic developments of this species were studied in the indoor aquaria, in the specific gravity ranging 1.024-1.025. the hatched juvenile of O. ocellatus is 10.3 mm in the mean total length and 4.5 mm in mantle length, and each of its short arms has 18-20 suckers. The just hatched juvenile larvae of O. ocellatus enter the benthic mode of life (benthic larval stage) after hatching. In particular, regarding differences in ecological characteristics of the mode of life according to total numbers of the suckers, O. vulgaris may not need to have many suckers because they enter the planktonic mode of life after hatching, however O. ocellatus may need to have many suckers, because they should adapt to the benthic mode of life. And also the just hatched juvenile larvae of O. minor (bearing many suckers more than O. ocellatus) enter the benthic mode of life (benthic larval stage) after hatching. Therefore, the total number of the suckers on each short arm of the hatched juvenile larvae can be used for determining whether an octopus species has planktonic larval stages or benthic larval stage (benthic mode of life). In particular, The intracohort cannibalism phenomena appeared at the hatched juvenile larval stage because the larval stage of O. ocellatus and O. minor enter into the benthic larval stage in the early stage, unlike entering into the plaktonic larval stage in other Octopus species such as O. vulgaris: at this time, the early hatched larvae fed the late hatched larvae (they are the same species and almost same ages). Therefore, the intracohort cannibalism pheneomena occur in the just hatched juvenile stage of only O. ocellatus and O. minor.

• Journal of the Korean association of regional geographers
• /
• v.13 no.1
• /
• pp.32-42
• /
• 2007

In Sagye coast of Andeok-myeon, southwestern Jeju, shore platform of noncohesive Hamori Formation, marine terrace deposit of round gravels, coastal dune composed of shell sand and volcanic sand, and back lake are linked closely with each other. In this paper, the formation process of Sagye coastal geomorphic system analysed by using OSL dating method is as follows: Firstly, Hamori Formation is a horizontal stratum filed up of tuff reworked by submarine volcanic eruption during 3$\sim$7.6 ka BP. Hollow at the boundary between Hamori Formation' flat and Kwangheak Basalt's gentle slope become a back lake when block is appeared over the sea level by uplift. Secondly, while Hamori Formation was laid below sea level, gravels which had been broken and abraded at southwestern rocky coast composed of Kwangheak basalt or been transported through the small stream from adjacent hillslope were deposited in rapid flow environment. Thirdly, deposition of round gravels was ceased by earth uplift, and shore platform was constructed by abrasion process of energy of swash moving forward. As altitude of shore platform is equal to high tidal level of spring tide, compared it with present high tidal level of study area, earth is uplifted about 105m since shore platform was formed. Fourthly, much sandy sediments transported from offshore bottom covered shore platforms and marine terrace deposits. Lighter sediments among sandy sediments was blown to back, formed secondary sand dune since about 500 year.