• 한국축산시설환경학회지
• /
• 제5권1호
• /
• pp.53-62
• /
• 1999

This study was carried out to investigate how to reuse the livestock waste and develop fly ash as a subsitution of sawdust which is used commonly to make compost. Fly ash and sawdust were mixed the ratio of 8 to 2, 7 to 3, 6, to 4, 5 to 5, 4 to 6. 3 to 7 and 2 to 8 after fermentation for 60 days the change of temperature, moisture, pH, organic matter, nitrogen content and C/N ratio were analyzed. The results are as follows; Temperature was reached to maximum (63.5$^{\circ}C$) more quickly in scraper type than in slurry type with adding large sawdust. When fly ash and sawdust were mixed same amount at scraper type and slurry type, moisture was 46.6~53.7% and maintained a good condition for fermentation. pH was showed the range of 7~10 as a mixture of fly ash. Organic matter contents were increased with increasing the added sawdust but did not show any tendency. Nitrogen content was also increased with increasing the amount of added sawdust but did not show any tendency. C/N ratio was increased to 20~60 with increasing the added sawdust, but when sawdust and fly ash were mixed 50:50, there was no significant during fermentation periods. In conclusion, supplementation of fly ash at the level of 50% of sawdust maintained a good condition for fermentation as a livestock waste composting.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.154-158
• /
• 2015

This paper investigates the reaction rates of $CO_2$ that stores carbonation through comparing the carbonation behavior between $Ca(OH)_2$ and fly ash with circulating fluidized bed combustion (CFBC) containing a large amount of free CaO. Because fly ash with CFBC contains abundant free CaO, it cannot be used as a raw material for concrete admixtures; hence, its usage is limited. Thus, it has been buried until now. In order to consider its reuse, we conduct carbonation reactions and investigate its rates. X-ray diffraction (XRD), thermogravimetric/differential thermal analysis (TG/DTA), and X-ray fluorescence (XRF) are conducted for the physical and chemical analyses of the raw materials. Furthermore, we use a PH meter and thermometer to verify the carbonization rates. We set the content of the fly ash of CFBC, $Ca(OH)_2$, $CO_2$ flow rate, and water to 100 ~ 400 g, 30 ~ 120 g, 700 cc/min, and 300 ~ 1200 g, respectively, based on the content of the free CaO determined through the TG/DTA analyses. As a result, the carbonization rate of the fly ash with CFBC is the same as that of $Ca(OH)_2$, and it tends to increase linearly. Based on these results, we investigate the carbonization behavior as a function of the free CaO content contained in the raw material.

• Computers and Concrete
• /
• 제17권3호
• /
• pp.337-351
• /
• 2016

This paper presents the properties of pervious concrete containing high-calcium fly ash. The water to binder ratios of 0.19, 0.22, and 0.25, designed void ratios of 15, 20, and 25%, and fly ash replacements of 10, 20, and 30% were used. The results showed that the use of fly ash as partial replacement of Portland cement enhanced the mixing of paste resulting in a uniform mix and reduced amount of superplasticizer used in the mixture. The compressive strength and flexural strength of pervious concrete were slightly reduced with an increase in fly ash replacement level, while the abrasion resistance increased due mainly to the pozzolanic and filler effects. The compressive strength and flexural strengths at 28 days were still higher than 85% of the control concrete. The aggregate size also had a significant effect on the strength of pervious concrete. The compressive strength and flexural strength of pervious concrete with large aggregate were higher than that with small aggregate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.43-44
• /
• 2023

This study evaluated the mechanical and electrical properties of low-cement mortar using a large amount of industrial by-products to reduce carbon emissions from the cement industry. As types of industrial by-products, blast furnace slag and fly ash, which are representative materials, were used, and ultra-high fly ash was mixed and evaluated to solve the problem of initial strength loss. In addition, in order to evaluate the electrical properties, 1% of MWCNT was incorporated relative to the powder mass. As experimental items, the compressive strength was measured on the 1st, 3rd, 7th and 28th days of age, and the rate of change in electrical resistance was measured on the 28th day of age. As a result of the experiment, the initial strength of the test specimen mixed with blast furnace slag and fly ash was significantly lower than that of 100% cement, and the specimen mixed with blast furnace slag showed strength equal to that of cement at 28 days of age. As an electrical characteristic, the electrical resistance was reduced when the load was loaded, and this reason is judged to be the effect of improving the conductivity as the connection between CNTs is narrowed by the compressive load.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.423-424
• /
• 2009

최근 자원의 재활용 및 알칼리-골재반응의 대책으로 F/a의 사용이 증가하는 추세이다. 그러나 F/a 치환량 증가에 따른 미연소탄소의 AE제 흡착으로 인하여 공기연행성능이 저하되어, 동결융해 작용에 의한 내구성 저하의 위험성이 고조되고 있다. 따라서 본 연구에서는 F/a 치환량 및 AE제 종류변화에 따른 굳지 않은 콘크리트의 공기연행성능을 분석함으로써 F/a를 다량 사용한 콘크리트의 기포안정성 향상을 위한 기초자료로 제시하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.525-528
• /
• 2004

The annual consumption of coal by coal-fired power plants is increasing. Also a large amount of ash is produced. The disposal of this large amount of ash makes the serious environmental problems and economical loss. Fly ash among the ash produced is used in building industries as a substitute to cement in concrete. But bottom ash is not used because of its poor properties. This study is aimed at the production of foamed concrete using bottom ash, to examine the physical properties of foamed concrete is manufactured by autoc1aving, and to exhibit the fundamental data to use it in site.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.357-364
• /
• 2018

플라이애시는 콘크리트의 혼화재로서 사용되는 재료로, 이를 콘크리트 제조에 사용할 경우 시멘트 사용량 감소 및 내화학성 증가와 같은 성능 향상을 기대할 수 있다. 하지만 플라이애시는 미연탄소 함유량 및 표면에 존재하는 유리질의 박막과 같은 문제점이 지적되고 있다. 다량의 미연탄소를 함유하는 플라이애시를 사용하여 콘크리트를 제조할 경우, AE제의 흡착 현상에 의해 슬럼프가 저하되는 문제점이 동반된다. 또한, 입자 표면에 존재하는 유리질 박막은 플라이애시로부터 반응성 물질이 용출되는 것을 방해하여 화학 반응이 일어나지 못하게 만드는 역할을 한다. 지금까지 이러한 플라이애시의 문제점을 해결하기 위하여 플라즈마를 이용한 표면개질 방안이 연구되었으나, 플라즈마는 $O_2$가 활성기체로서 사용될 경우 $O_3$를 발생시키는 문제점을 지니고 있다. 따라서 본 연구에서는 아크방전을 이용해 플라이애시의 표면을 개질하는 방안에 관한 연구를 진행하였으며, 그에 따른 플라이애시의 물리 화학적 특성 변화를 확인하였다. 실험 결과, 아크방전을 이용해 플라이애시의 표면을 개질할 경우 미연탄소가 제거되며 유리질 박막이 파괴되는 것을 확인하였다.

• 공업화학
• /
• 제22권2호
• /
• pp.214-218
• /
• 2011

마이크로파 가열 방법과 기존의 가열 방법을 이용하여 석탄회로부터 제올라이트 A를 합성하였다. 반응시간, sodium aluminate의 양, 반응 온도 등이 제올라이트 A의 결정화에 미치는 영향에 대해 연구하였다. $80{\sim}100^{\circ}C$의 범위에서 제올라이트 A의 합성에 필요한 반응 시간은 3~6 h이었으며, 6 h 이상이 되면 결정화도가 오히려 감소하였다. 제올라이트 A의 합성에 필요한 sodium aluminate의 양은 $90^{\circ}C$ 이상에서는 합성용액의 $SiO_2/Al_2O_3$의 비가 0.44~1.05에서 최적이었으며, $80^{\circ}C$에서는 더 많은 양이 필요하였다. 마이크로파 가열 방법은 기존의 가열 방법에 비해 초기 결정화 속도는 약간 증가하였으나, 충분히 결정화되는데 필요한 반응시간은 서로 비슷하였다. 따라서 마이크로파 가열에 의한 석탄회로부터 제올라이트 A의 합성에 미치는 영향은 크지 않다는 것을 알 수 있었다.

• KIEAE Journal
• /
• 제15권4호
• /
• pp.45-52
• /
• 2015

Purpose: Foam concrete is the concrete that contains large amount of air voids inside. In general, the density of foam concrete depends on parameters like water/binder ratio, foam volume, aggregate and pozzolan content, etc. Method: In this study, the effect of foam volume and fly ash content on dry density is investigated intensively in order to find the relationship between each parameter and their abilities to counteract with each other. According to the above information, though there are quite a number of studies on the effect micro fiber on foam concrete at low volume fractions, there is still lack of information especially on the high fiber content side. The objective of the second study is to investigate further on the use of micro fiber at higher volume fraction and fill in the lacking information. Beside from this study, the investigation of the effect of micro-fiber (polypropylene) to enhance the properties of foam concrete is also carried out. Result: Of the two variables that are investigated in this study, the foam volume and the fly ash content, show significant effect on the properties of foam concrete. The foam volume tends to decrease the density and strength of foam concrete. In the second part of our study, a large fibre volume fraction is proved to be able to evidently increase the flexural strength of foam concrete up to about 40% due to the effect of fibre bridging over the crack and a significant number of fibres that intercepts the crack surfaces. However, the compressive strength is found to decrease severely due to the occurrence of large pores as the result of fibre being added into concrete mixture.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.133-139
• /
• 1996

As construction technology advances, most of civil engineering structures are becoming larger and taller. Therefore, high strength concrete is necessary for them. For high strength concrete, it needs a large amount of unit cement content and low water-cement ratio inevitably, so that a large amount of heat occurs in concrete. The thermal cracks make the durability and quality of concrete structures become worse, result from temperature rise and thermal stress due to heat of hydration. In this study, the proposal of using ground granulated blast furnace slag, fly ash and chemical admixtures was investigated to decrease the temperature rise of concrete.