• Title/Summary/Keyword: A University

Search Result 549,946, Processing Time 0.479 seconds

GENERAL STRATIGRAPHY OF KOREA (한반도층서개요(韓半島層序槪要))

  • Chang, Ki Hong
    • Economic and Environmental Geology
    • /
    • v.8 no.2
    • /
    • pp.73-87
    • /
    • 1975
  • Regional unconformities have been used as boundaries of major stratigraphic units in Korea. The term "synthem" has already been propsed for formal unconformity-bounded stratigraphic units of maximum magnitude (ISSC, 1974). The unconformity-based classification of the strata in the cratonic area in Korea comprises in ascending order the Kyerim, $Sangw{\check{o}}n$, $Jos{\check{o}}n$, $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems, and the Cenozoic Erathem. The unconformites separating them from each other are either orogenic or epeirogenic (and vertical tectonic). The sub-$Sangw{\check{o}}n$ unconformity is a non-conformity above the basement complex in Korea. The unconformities between the $Sangw{\check{o}}n$, $Jos{\check{o}}n$, and $Py{\check{o}}ngan$ Synthems are disconformities denoting late Precambrian and Paleozoic crustal quiescence in Korea. The unconformities between the $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems are angular unconformities representing Mesozoic orogenies. The bounding unconformities of the $Ky{\check{o}}ngsang$ Synthem involve non-conformable parts overlying the Jurassic and late Cretaceous granitic rocks.

  • PDF

Studies on the Species Crossabilities in the Genus Pinus and Principal Characteristics of F1 Hybrids (일대잡종송(一代雜種松)의 교배친화력(交配親和力)과 특성(特性)에 관(關)한 연구(硏究))

  • Ahn, Kun Yong
    • Journal of Korean Society of Forest Science
    • /
    • v.16 no.1
    • /
    • pp.1-32
    • /
    • 1972
  • By means of the interspecific hybridization in the Sub-genus Diploxylon of the Genus Pinus, $F_1$ hybrids of Pinus rigida${\times}$elliottii, Pinus rigida${\times}$radiata, P. rigida${\times}$serotina and P. densiflora${\times}$thunbergii had been produced. And on the basis of the crossabilities of these hybrids the taxonomic affinities of these pines were examined. And the needle characteristics of these hybrid and the occurence of phenolic substances in these $F_1$ hybrid were also investigated to see the potential usefulness of these characteristics for the diagnosis of the taxonomic affinity. And, the growth performances of the $F_1$ hybrids have also been compared with those of parental species. In order to contribute to the establishment of the hybrid seed orchard the introgression phenomena between P. densiflora and P. thunbergii in the eastern coastal area have also been investigated along with the investigation of the heterozygosity of plus trees of P. densiflora growing in the clone bank in Suwon. And the results were summarized as follows. 1. On the basis of crossabilities as well as on the taxonomic affinities according to the systems of Shaw, Pilger and Duffield, it has been proven that the parental species of those hybrids are of close affinities and range of the fertile hybrid seed production rate was as high as 28-58% in the best hybrid combination (Table 13). 2. Among those hybrids, the ${\times}$ Pinus, rigiserotina hybrid seemed to be most promising in the growth performance exhibiting 109-155% more volume growth compared to the seed parent with the statistic significance of 1% level (Tables 16 and 17). 3. Notwithstanding the fact that the all of the pollen parents are cold tender, all hybrids exhibit cold hardiness as much as their seed parent and it seems to suggest that the characteristics of cold hardiness were transmitted from the seed parent. 4. Though a striking difference in needle length was observed between the parental species of each hybrid, it was difficult to distinguish each hybrid from their seed parent by the needle length except ${\times}$P. rigiserotina which is characterized by long needle which is 65% more longer than the needle of the seed parent (Table 21). 5. With regard to the anatomical characteristics of needle, the hypoderm is apparently thicker in most of the $F_1$ hybrid pines and the characteristics of resin canals are dominated by medial in most $F_1$ hybrid. And, the fibrovascular bundles were apart as were in their seed parent. Therefore it was found to be possible to distinguish the hybrids pines from their parents by the needle characteristics. And, it is to be noticed that the ${\times}$P. densithunbergii was more close to the pollen parent having RDI value of 0.73 (Fig.l, Table 22). 6. It has been demonstrated that ${\times}$P. rigielliottii, ${\times}$P. rigiradiata and ${\times}$P. rigitaeda have a phenolic substance (No.7) of light yellow at Rf-0.46, same as their seed parent, but no trace of phenolic substance was observed in their pollen parent. This fact will serve as an important criteria for early identification of hybridity in progeny testing. However, the fact that both of ${\times}$P. rigiserotina and ${\times}$P. densithunbergii exhibit the same reactions of phenolic substances as well their parental species seems to indicate the close affinities between the parental species of the respective hybrid (Fig.2, Table 23). 7. The separation and the reaction of phenolic substance developed on TLC were found to be same in the same species showing no variations between the individuals, and no variations due to tree part of sampling, tree age or pollen sources. And the reaction was also observed regardless of the not varied by the kind of developing solvent whether it is Aceton-Chloroform (3:7 v/v) or Benzene-Methanol-Acetic acid (90:16:8 v/v). 8. The introgression phenomena of natural Pinus densifiora stand in both east and west coastal area indicates that the major part of the red pines investigated are all heterozygous and the heterozygosity of pines are higher in the west coast than in the east coast(Tables 24 and 25). 9. Based on the RDI, among the plus trees of Pinus densiflora selected in Korea and Japan as well, no pure P. densiflora has been found. Since all of the sample trees of Pinus densiflora were found to be as heterozygous bearing part of the characteristics of P. thunbergii, those red pines were considered to be natural heterotic hybrid pines(Figs. 3 and 4. Tables 26 and 27).

  • PDF

Studies on the physio-chemical properties and the cultivation of oyster mushroom(Pleurotus ostreatus) (느타리버섯의 생리화학적성질(生理化學的性質) 및 재배(栽培)에 관(關)한 연구(硏究))

  • Hong, Jai-Sik
    • Applied Biological Chemistry
    • /
    • v.21 no.3
    • /
    • pp.150-184
    • /
    • 1978
  • Nutritional characteristics and physio-chemical properties of mycelial growth and fruitbody formation of oyster mushroom(Pleurotus ostreatus)in synthetic media, the curtural condition for the commerical production in the rice straw and poplar sawdust media, and the changes of the chemical components of the media and mushroom during the cultivation were investigated. The results can be summarized as follows: 1. Among the carbon sources mannitol and sucrose gave rapid mycelial growth and rapid formation of fruit-body with higher yield, while lactose and rhamnose gave no mycelial growth. Also, citric acid, succinic acid, ethyl alcohol and glycerol gave poor fruit-body formation, and acetic acid, formic acid, fumaric acid, n-butyl alcohol, n-propyl alcohol and iso-butyl alcohol inhibited mycelial growth. 2. Among the nitrogen sources peptone gave rapid mycelial growth and rapid formation of fruit-body with higher yield, while D,L-alanine, asparatic acid, glycine and serine gave very poor fruit-body formation, and nitrite nitrogens, L-tryptophan and L-tyrosine inhibited mycelial growth. Inorganic nitrogens and amino acids added to peptone were effective for fruit-body growth, and thus addition of ammonium sulfate, ammonium tartarate, D,L-alanine and L-leucine resulted in about 10% increase fruit-body yield. L-asparic acid about 15%, L-arginine about 20%, L-glutamic acid, and L-lysine about 25%. 3. At C/N ratio of 15.23 fruit-body formation was fast, but the yield decreased, and at C/N ratio of 11.42 fruit-body formation was slow, but the yield increased. Also, at the same C/N ratio the higher the concentration of mannitol and petone, the higher yield was produced. Thus, from the view point of both yield of fruit-body and time required for fruiting the optimum C/N ratio would be 30. 46. 4. Thiamine, potassium dihydrogen phosphate and magnecium sulfate at the concentration of $50{\mu}g%$. 0.2% and 0.02-0.03%, respectively, gave excellent mycelial and fruit-body growth. Among the micronutrients ferrous sulfate, zinc sulfate and manganese sulfate showed synergetic growth promoting effect but lack of manganese resulted in a little reduction in mycelial and fruit-body growth. The optimum concentrati on of each these nutrients was 0.02mg%. 5. Cytosine and indole acetic acid at 0.2-1mg% and 0.01mg%, respectively, increased amount of mycelia, but had no effect on yield of fruit-body. The other purine and pyrimidine bases and plant hormones also had no effect on mycelial and fruit-belly yield. 6. Illumination inhibited mycelial growth, but illumination during the latter part of vegetative growth induced primordia formation. The optimum light intensity and exposure time was 100 to 500 lux and 6-12 hours per day, respectively. Higher intensity of light was injurous, and in darkness only vegetative growth without primordia formation was continued. 7. The optimum temperature for mycelial growth was $25^{\circ}C$ and for fruit-body formation 10 to $15^{\circi}C$. The optimum pH range was from 5.0 to 6.5. The most excellent fry it-body formation were produced from the mycelium grown for 7 to 10 days. The lesser the volume of media, the more rapid the formation of fruit-body; and the lower the yield of fruit-body; and the more the volume of media, the slower the formation of fruit-body, and the higher the yield of fruit-body. The primordia formation was inhibited by $CO_2$. 8. The optimum moisture content for mycelial growth was over 70% in the bottle media of rice straw and poplar sawdust. 10% addition of rice bran to the media exhibited excellent mycelial growth and fruit-body formation, and the addition of calciumcarbonate alone was effective, but the addition of calcium carbonate was ineffective in the presence of rice bran. 9. In the cultivation experiments the total yield of mushroom from the rice straw media was $14.99kg/m^2$, and from the sawdust media $6.52kg/m^2$, 90% of which was produced from the first and second cropping period. The total yield from the rice straw media was about 2.3 times as high as that from the sawdust media. 10. Among the chemical components of the media little change was observed in the content of ash on the dry weight basis, and organic matter content decreased as the cultivation progressed. Moisture content, which was about 79% at the time of spawning, decreased a little during the period of mycelial propagation, after which no change was observed. 11. During the period from spawning to the fourth cropping about 16.7% of the dry matter, about 19.3% of organic matter, and about 40% of nitrogen were lost from the rice straw media; about 7.5% of dry mallet, about 7.6% of organic matter, and about 20% of nitrogen were lost from the sawdust media. For the production of 1kg of mushroom about 232g of organic matter and about 7.0g of nitrogen were consumed from the rice straw media; about 235g of organic matter and about 6.8g of nitrogen were consumed from the sawdust media, 1㎏ of mushroom from either of media contains 82.4 and 82.3g of organic matter and 5.6 and 5.4g of nitrogen, respectively. 12. Total nitrogen content of the two media decreased gradually as the cultivation progressed, and total loss of insoluble nitrogen was greater than that of soluble nitrogen. Content of amino nitrogen continued to increase up to the third cropping time, after which it decreased. 13. In the rice straw media 28.0 and 13.8% of the total pentosan and ${\alpha}$-cellulose, respectively, lost during the whole cultivation period was lost during the period of mycelial growth; in the sawdust media 24.1 and 11.9% of the total pentosan and ${\alpha}$-cellulose, respectively, was lost during the period of mycelial growth. Lignin content in the media began to decrease slightly from the second cropping time, while the content of reduced sugar, trehalose and mannitol continued to increase. C/N ratio of the rice straw media decreased from 33.2 at spawining to 30.0 at ending; that of the sawdust media decreased from 61.3 to 60.0. 14. In both media phosphorus, potassium, manganese and zinc decreased, at magnesium, calcium and copper showed irregular changes, and iron had a tendency to be increased. 15. Enzyme activities are much higher in the rice straw media than in the sawdust media. CMC saccharifying and liquefying activity gradually increased from after mycelial propagation to the second cropping, after which it decreased in both media. Xylanase activity rapidly and greatly increased during the second cropping period rather than the first period. At the start of the third cropping period the activity decreased rapidly in the rice straw media, which was not observed in the sawdust media. Protease activity was highest after mycelial propagation, after which it gradually decreased. The pH of the rice straw media decreased from 6.3 at spawning to 5.0 after fourth cropping; that of the sawdust media decreased from 5.7 to 4.9. 16. The contents of all the components except crude fibre of the mushroom from the rice straw media were higher than those from the sawdust media. Little change was observed in the content of the components of mushroom cropped from the first to the third period, but slight decrease was noticed at the fourth cropping.

  • PDF

A Study on Physical and Mechanical Properties of Sawdustboards combined with Polypropylene Chip and Oriented Thread (폴리프로필렌사(絲)칩과 배향사(配向絲)를 결체(結締)한 톱밥보드의 물리적(物理的) 및 기계적(機械的) 성질(性質)에 관(關)한 연구(硏究))

  • Suh, Jin-Suk;Lee, Phil-Woo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.16 no.2
    • /
    • pp.1-41
    • /
    • 1988
  • For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

  • PDF

An Analytical Study on the Stem-Growth by the Principal Component and Canonical Correlation Analyses (주성분(主成分) 및 정준상관분석(正準相關分析)에 의(依)한 수간성장(樹幹成長) 해석(解析)에 관(關)하여)

  • Lee, Kwang Nam
    • Journal of Korean Society of Forest Science
    • /
    • v.70 no.1
    • /
    • pp.7-16
    • /
    • 1985
  • To grasp canonical correlations, their related backgrounds in various growth factors of stem, the characteristics of stem by synthetical dispersion analysis, principal component analysis and canonical correlation analysis as optimum method were applied to Larix leptolepis. The results are as follows; 1) There were high or low correlation among all factors (height ($x_1$), clear height ($x_2$), form height ($x_3$), breast height diameter (D. B. H.: $x_4$), mid diameter ($x_5$), crown diameter ($x_6$) and stem volume ($x_7$)) except normal form factor ($x_8$). Especially stem volume showed high correlation with the D.B.H., height, mid diameter (cf. table 1). 3) (1) Canonical correlation coefficients and canonical variate between stem volume and composite variate of various height growth factors ($x_1$, $x_2$ and $x_3$) are ${\gamma}_{u1,v1}=0.82980^{**}$, $\{u_1=1.00000x_7\\v_1=1.08323x_1-0.04299x_2-0.07080x_3$. (2) Those of stem volume and composite variate of various diameter growth factors ($x_4$, $x_5$ and $x_6$) are ${\gamma}_{u1,v1}=0.98198^{**}$, $\{{u_1=1.00000x_7\\v_1=0.86433x_4+0.11996x_5+0.02917x_6$. (3) And canonical correlation between stem volume and composite variate of six factors including various heights and diameters are ${\gamma}_{u1,v1}=0.98700^{**}$, $\{^u_1=1.00000x_7\\v1=0.12948x_1+0.00291x_2+0.03076x_3+0.76707x_4+0.09107x_5+0.02576x_6$. All the cases showed the high canonical correlation. Height in the case of (1), D.B.H. in that of (2), and the D.B.H, and height in that of (3) respectively make an absolute contribution to the canonical correlation. Synthetical characteristics of each qualitative growth are largely affected by each factor. Especially in the case of (3) the influence by the D.B.H. is the most significant in the above six factors (cf. table 2). 3) Canonical correlation coefficient and canonical variate between composite variate of various height growth factors and that of the various diameter factors are ${\gamma}_{u1,v1}=0.78556^{**}$, $\{u_1=1.20569x_1-0.04444x_2-0.21696x_3\\v_1=1.09571x_4-0.14076x_5+0.05285x_6$. As shown in the above facts, only height and D.B.H. affected considerably to the canonical correlation. Thus, it was revealed that the synthetical characteristics of height growth was determined by height and those of the growth in thickness by D.B.H., respectively (cf. table 2). 4) Synthetical characteristics (1st-3rd principal component) derived from eight growth factors of stem, on the basis of 85% accumulated proportion aimed, are as follows; Ist principal component ($z_1$): $Z_1=0.40192x_1+0.23693x_2+0.37047x_3+0.41745x_4+0.41629x_5+0.33454x_60.42798x_7+0.04923x_8$, 2nd principal component ($z_2$): $z_2=-0.09306x_1-0.34707x_2+0.08372x_3-0.03239x_4+0.11152x_5+0.00012x_6+0.02407x_7+0.92185x_8$, 3rd principal component ($z_3$): $Z_3=0.19832x_1+0.68210x_2+0.35824x_3-0.22522x_4-0.20876x_5-0.42373x_6-0.15055x_7+0.26562x_8$. The first principal component ($z_1$) as a "size factor" showed the high information absorption power with 63.26% (proportion), and its principal component score is determined by stem volume, D.B.H., mid diameter and height, which have considerably high factor loading. The second principal component ($z_2$) is the "shape factor" which indicates cubic similarity of the stem and its score is formed under the absolute influence of normal form factor. The third principal component ($z_3$) is the "shape factor" which shows the degree of thickness and length of stem. These three principal components have the satisfactory information absorption power with 88.36% of the accumulated percentage. variance (cf. table 3). 5) Thus the principal component and canonical correlation analyses could be applied to the field of forest measurement, judgement of site qualities, management diagnoses for the forest management and the forest products industries, and the other fields which require the assessment of synthetical characteristics.

  • PDF

과학자(科學者)의 정보생산(情報生産) 계속성(繼續性)과 정보유통(情報流通)(2)

  • Garvey, W.D.
    • Journal of Information Management
    • /
    • v.6 no.5
    • /
    • pp.131-134
    • /
    • 1973
  • 본고(本稿)시리이즈의 제1보(第一報)에서 우리는 물리(物理), 사회과학(社會科學) 및 공학분야(工學分野)의 12,442명(名)의 과학자(科學者)와 기술자(技術者)에 대한 정보교환활동(情報交換活動)의 78례(例)에 있어서 일반과정(一般過程)과 몇 가지 결과(結果)를 기술(記述)한 바 있다. 4년반(年半) 이상(以上)의 기간(其間)($1966{\sim}1971$)에서 수행(遂行)된 이 연구(硏究)는 현재(現在)의 과학지식(科學知識)의 집성체(集成體)로 과학자(科學者)들이 연구(硏究)를 시작(始作)한 때부터 기록상(記錄上)으로 연구결과(硏究結果)가 취합(聚合)될 때까지 각종(各種) 정형(定形), 비정형(非定形) 매체(媒體)를 통한 유통정보(流通情報)의 전파(傳播)와 동화(同化)에 대한 포괄적(包括的)인 도식(圖式)으로 표시(表示)할 수 있도록 설정(設定)하고 또 시행(施行)되었다. 2보(二報), 3보(三報), 4보(四報)에서는 데이터 뱅크에 수집(蒐集) 및 축적(蓄積)된 데이터의 일반적(一般的)인 기술(記述)을 적시(摘示)하였다. (1) 과학(科學)과 기술(技術)의 정보유통(情報流通)에 있어서 국가적(國家的) 회합(會合)의 역할(役割)(Garvey; 4보(報)) 국가적(國家的) 회합(會合)은 투고(投稿)와 이로 인한 잡지중(雜誌中) 게재간(揭載間)의 상대적(相對的)인 오랜 기간(期間)동안 이러한 연구(硏究)가 공개매체(公開媒體)로 인하여 일시적(一時的)이나마 게재여부(揭載如否)의 불명료성(不明瞭性)을 초래(招來)하기 전(前)에 과학연구(科學硏究)의 초기전파(初期傳播)를 위하여 먼저 행한 주요(主要) 사례(事例)와 마지막의 비정형매체(非定形媒體)의 양자(兩者)를 항상 조직화(組織化)하여 주는 전체적(全體的)인 유통과정(流通過程)에 있어서 명확(明確)하고도 중요(重要)한 기능(機能)을 갖는다는 것을 알 수 있었다. (2) 잡지(雜誌)에 게재(揭載)된 정보(情報)의 생산(生産)과 관련(關聯)되는 정보(情報)의 전파과정(傳播過程)(Garvey; 1보(報)). 이 연구(硏究)를 위해서 우리는 정보유통과정(情報流通過程)을 따라 많은 노력(努力)을 하였는데, 여기서 유통과정(流通過程)의 인상적(印象的)인 면목(面目)은 특별(特別)히 연구(硏究)로부터의 정보(情報)는 잡지(雜誌)에 게재(揭載)되기까지 진정으로는 공개적(公開的)이 못된다는 것과 이러한 사실(事實)은 선진연구(先進硏究)가 자주 시대(時代)에 뒤떨어지게 된다는 것을 발견할 수 있었다. 경험(經驗)이 많은 정보(情報)의 수요자(需要者)는 이러한 폐물화(廢物化)에 매우 민감(敏感)하며 자기(自己) 연구(硏究)에 당면한, 진행중(進行中)이거나 최근(最近) 완성(完成)된 연구(硏究)에 대하여 정보(情報)를 얻기 위한 모든 수단(手段)을 발견(發見)코자 하였다. 예를 들어, 이들은 잡지(雜誌)에 보문(報文)을 발표(發表)하기 전(前)에 발생(發生)하는 정보전파과정(情報傳播過程)을 통하여 유루(遺漏)될지도 모르는 정보(情報)를 얻기 위하여 한 잡지(雜誌)나 2차자료(二次資料) 또는 전형적(典型的)으로 이용(利用)되는 다른 잡지류중(雜誌類中)에서 당해정보(當該情報)가 발견(發見)되기를 기다리지 않는다는 것이다. (3) "정보생산 과학자(情報生産 科學者)"에 의한 정보전파(情報傳播)의 계속성(繼續性)(이 연구(硏究) 시리이즈의 결과(結果)는 본고(本稿)의 주내용(主內容)으로 되어 있다.) 1968/1969년(年)부터 1970/1971년(年)의 이년기간(二年期間)동안 보문(報文)을 낸 과학자(科學者)(1968/1969년(年) 잡지중(雜誌中)에 "질이 높은" 보문(報文)을 발표(發表)한)의 약 2/3는 1968/1969의 보문(報文)과 동일(同一)한 대상영역(對象領域)의 연구(硏究)를 계속(繼續) 수행(遂行)하였다. 그래서 우리는 본연구(本硏究)에 오른 대부분(大部分)의 저자(著者)가 정상적(正常的)인 과학(科學), 즉 연구수행중(硏究遂行中) 의문(疑問)에 대한 완전(完全)한 해답(解答)을 얻게 되는 가장 중요(重要)한 추구(追求)로서 Kuhn(제5보(第5報))에 의하여 기술(技術)된 방법(방법)으로 과학(연구)(科學(硏究))을 실행(實行)하였음을 알았다. 최근(最近)에 연구(硏究)를 마치고 그 결과(結果)를 보문(報文)으로서 발표(發表)한 이들 과학자(科學者)들은 다음 단계(段階)로 해야 할 사항(事項)에 대하여 선행(先行)된 동일견해(同一見解)를 가진 다른 연구자(硏究자)들의 연구(硏究)와 대상(對象)에 밀접(密接)하게 관련(關聯)되고 있다. 이 계속성(繼續性)의 효과(效果)에 대한 지표(指標)는 보문(報文)과 동일(同一)한 영역(領域)에서 연구(硏究)를 계속(繼續)한 저자(著者)들의 약 3/4은 선행(先行) 보문(報文)에 기술(技術)된 연구결과(硏究結果)에서 직접적(直接的)으로 새로운 연구(硏究)가 유도(誘導)되었음을 보고(報告)한 사항(事項)에 반영(反映)되어 있다. 그렇지만 우리들의 데이터는 다음 영역(領域)으로 기대(期待)하지 않은 전환(轉換)을 일으킬 수도 있음을 보여주고 있다. 동일(同一) 대상(對象)에서 연구(硏究)를 속행(續行)하였던 저자(著者)들의 1/5 이상(以上)은 뒤에 새로운 영역(領域)으로 연구(硏究)를 전환(轉換)하였고 또한 이 영역(領域)에서 연구(硏究)를 계속(繼續)하였다. 연구영역(硏究領域)의 이러한 변화(變化)는 연구자(硏究者)의 일반(一般) 정보유통(情報流通) 패턴에 크게 변화(變化)를 보이지는 않는다. 즉 새로운 지적(知的) 문제(問題)에 대한 변화(變化)에서 야기(惹起)되는 패턴에 있어서 저자(著者)들은 오래된 문제(問題)의 방법(方法)과 기술(技術)을 새로운 문제(問題)로 맞추려 한다. 과학사(科學史)의 최근(最近) 해석(解釋)(Hanson: 6보(報))에서 예기(豫期)되었던 바와 같이 정상적(正常的)인 과학(科學)의 계속성(繼續性)은 항상 절대적(絶對的)이 아니며 "과학지식(科學知識)"의 첫발자욱은 예전 연구영역(硏究領域)의 대상(對象)에 관계(關係)없이 나타나는 다른 영역(領域)으로 내딛게 될지도 모른다. 우리들의 연구(硏究)에서 저자(著者)의 1/3은 동일(同一) 영역(領域)의 대상(對象)에서 속계적(續繼的)인 연구(硏究)를 수행(遂行)치 않고 새로운 영역(領域)으로 옮아갔다. 우리는 이와 같은 데이터를 (a) 저자(著者)가 각개과학자(各個科學者)의 활동(活動)을 통하여 집중적(集中的)인 과학적(科學的) 노력(努力)을 시험(試驗)할 때 각자(各自)의 연구(硏究)에 대한 많은 양(量)의 계속성(繼續性)이 어떤 진보중(進步中)의 과학분야(科學分野)에서도 나타난다는 것과 (b) 이 계속성(繼續性)은 과학(科學)에 대한 집중적(集中的) 진보(進步)의 필요적(必要的) 특질(特質)이라는 것을 의미한다. 또한 우리는 이 계속성(繼續性)과 관련(關聯)되는 유통문제(流通問題)라는 새로운 대상영역(對象領域)으로 전환(轉換)할 때 연구(硏究)의 각단계(各段階)의 진보(進步)와 새로운 목적(目的)으로 전환시(轉換時) 양자(兩者)가 다 필요(必要)로 하는 각개(各個) 과학자(科學者)의 정보수요(情報需要)를 위한 시간(時間) 소비(消費)라는 것을 탐지(探知)할 수 있다. 이러한 관찰(觀察)은 정보(情報)의 선택제공(選擇提供)시스팀이 현재(現在) 필요(必要)로 하는 정보(情報)의 만족(滿足)을 위하여는 효과적(效果的)으로 매우 융통성(融通性)을 띠어야 한다는 것을 암시(暗示)하는 것이다. 본고(本稿)의 시리이즈에 기술(記述)된 전정보유통(全情報流通) 과정(過程)의 재검토(再檢討) 결과(結果)는 과학자(科學者)들이 항상 그들의 요구(要求)를 조화(調和)시키는 신축성(伸縮性)있는 유통체제(流通體制)를 발전(發展)시켜 왔다는 것을 시사(示唆)해 주고 있다. 이 시스팀은 정보전파(情報傳播) 사항(事項)을 중심(中心)으로 이루어 지며 또한 이 사항(事項)의 대부분(大部分)의 참여자(參與者)는 자기자신(自己自身)이 과학정보(科學情報) 전파자(傳播者)라는 기본적(基本的)인 정보전파체제(情報傳播體制)인 것이다. 그러나 이 과정(過程)의 유통행위(流通行爲)에서 살펴본 바와 같이 우리는 대부분(大部分)의 정보전파자(情報傳播者)가 역시 정보(情報)의 동화자(同化者)-다시 말해서 과학정보(科學情報)의 생산자(生産者)는 정보(情報)의 이용자(利用者)라는 것을 알 수 있다. 이 연구(硏究)에서 전형적(典型的)인 과학자((科學者)는 과학정보(科學情報)의 생산(生産)이나 전파(傳播)의 양자(兩者)에 연속적(連續的)으로 관계(關係)하고 있음을 보았다. 만일(萬一) 연구자(硏究者)가 한 편(編)의 연구(硏究)를 완료(完了)한다면 이 연구자(硏究者)는 다음에 무엇을 할 것이냐 하는 관념(觀念)을 갖게 되고 따라서 "완료(完了)된" 연구(硏究)에 관한 정보(情報)를 이용(利用)하여 동시(同時)에 새로운 일을 시작(始作)하게 된다. 예를 들어, 한 과학자(科學者)가 동일(同一) 영역(領域)의 다른 동료연구자(同僚硏究者)에게 완전(完全)하며 이의(異議)에 방어(防禦)할 수 있는 보고서(報告書)를 제공(提供)할 수 있는 단계(段階)에 도달(到達)하였다면 우리는 이 과학자(科學者)가 정보유통과정(情報流通過程)에서 많은 역할(役割)을 해낼 수 있다는 것을 알 것이다. 즉 이 과학자(科學者)는 다른 과학자(科學者)들에게 최신(最新)의 과학적(科學的) 결과(結果)를 제공(提供)할 때 하나의 과학정보(科學情報) 전파자(傳播者)가 되며, 이 연구(硏究)의 의의(意義)와 타당성(妥當性)에 관한 논평(論評)이나 비평(批評)을 동료(同僚)로부터 구(求)하는 관점(觀點)에서 보면 이 과학자(科學者)는 하나의 정보탐색자(情報探索者)가 된다. 또한 장래(將來)의 이용(利用)을 위하여 증정(贈呈)이나 동화(同化)한 이 정보(情報)로부터 피이드백을 받아 드렸을 때의 범주(範疇)에서 보면 (잡지(雜誌)에 투고(投稿)하기 위하여 원고(原稿)를 작성(作成)하는 경우에 있어서와 같이) 과학자(科學者)는 하나의 정보이용자(情報利用者)가 되고 이러한 모든 가능성(可能性)에서 정보생산자(情報生産者)는 다음 정보생산(情報生産)에 이미 들어가 있다고 볼 수 있다(저자(著者)들의 2/3는 보문(報文)이 게재(揭載)되기 전(前)에 이미 새로운 연구(硏究)를 시작(始作)하였다). 과학자(科學者)가 자기연구(自己硏究)를 마치고 예비보고서(豫備報告書)를 만든 후(後) 자기연구(自己硏究)에 관한 정보(情報)의 전파(傳播)를 계속하게 되는데 이와 관계(關係)되는 일반적(一般的)인 패턴을 보면 소수(少數)의 동료(同僚)그룹에 출석(出席)하는 경우 (예로 지역집담회)(地域集談會))와 대중(大衆) 앞에서 행(行)하는 경우(예로 국가적 회합(國家的 會合)) 등이 있다. 그러는 동안에 다양성(多樣性) 있는 성문보고서(成文報告書)가 이루어진다. 그러나 과학자(科學者)들이 자기연구(自己硏究)를 위한 주정보전파목표(主情報傳播目標)는 과학잡지중(科學雜誌中)에 게재(揭載)되는 보문(報文)이라는 것이 명확(明確)한 사실(事實)인 것이다. 이러한 목표(目標)에 도달(到達)할 때까지의 각(各) 정보전파단계(情報傳播段階)에서 과학자(科學者)들은 목표달성(目標達成)을 위하여 청중(聽衆), 자기동화(自己同化)된 정보(情報) 및 이미 이용(利用)된 정보(情報)로부터 피이드백을 탐색(探索)하게 된다. 우리가 본고(本稿)의 시리이즈중(中)에 표현(表現)하려 했던 바와 같이 이러한 활동(活動)은 조사수임자(調査受任者)의 의견(意見)이 원고(原稿)에 반영(反映)되고 또 그 원고(原稿)가 잡지게재(雜誌揭載)를 위해 수리(受理)될 때까지 계속적(繼續的)으로 정보(情報)를 탐색(探索)하는 과학자(科學者)나 기타(其他)사람들에게 효과적(效果的)이었다. 원고(原稿)가 수리(受理)되면 그 원고(原稿)의 저자(著者)들은 그 보문(報文)의 주내용(主內容)에 대하여 적극적(積極的)인 정보전파자(情報傳播者)로서의 역할(役割)을 종종 중지(中止)하는 일이 있는데 이때에는 저자(著者)들의 역할(役割)이 변화(變化)하는 것을 볼 수 있었다. 즉 이 저자(著者)들은 일시적(一時的)이긴 하나 새로운 일을 착수(着手)하기 위하여 정보(情報)의 동화자(同化者)를 찾게 된다. 또한 전(前)에 행한 일에 대한 의견(意見)이나 비평(批評)이 새로운 일에 영향(影響)을 끼치게 된다. 동시(同時)에 새로운 과학정보생산(科學情報生産) 과정(過程)에 들어가게 되고 현재(現在) 진행중(進行中)이거나 최근(最近) 완료(完了)한 연구(硏究)에 대한 정보(情報)를 항상 찾게 된다. 활발(活潑)한 연구(硏究)를 하는 과학자(科學者)들에게는, 동화자(同化者)로서의 역할(役割)과 전파자(傳播者)로서의 역할(役割)을 분리(分離)시킨다는 것은 실제적(實際的)은 못된다. 즉 후자(後者)를 완성(完成)하기 위해서는 전자(前者)를 이용(利用)하게 된다는 것이다. 과학자(科學者)들은 한 단계(段階)에서 한 전파자(傳播者)로서의 역할(役割)이 뚜렷하나 다른 단계(段階)에서는 정보교환(情報交換)이 기본적(基本的)으로 정보동화(情報同化)에 직결(直結)되고 있는 것이다. 정보전파자(情報傳播者)와 정보동화자간(情報同化者間)의 상호관계(相互關係)(또는 정보생산자(情報生産者)와 정보이용자간(情報利用者間))는 과학(科學)에 있어서 하나의 필수양상(必修樣相)이다. 과학(科學)의 유통구조(流通構造)가 전파자(傳播者)(이용자(利用者)로서의 역할(役割)보다는)의 필요성(必要性)에서 볼 때 복잡(複雜)하고 다이나믹한 시스팀으로 구성(構成)된다는 사실(事實)은 과학(科學)의 발전과정(發展過程)에서 필연적(必然的)으로 나타난다. 이와 같은 사실(事實)은 과학정보(科學情報)의 전파요원(傳播要員)이 국가적 회합(國家的 會合)에서 자기연구(自己硏究)에 대한 정보(情報)의 전파기회(傳播機會)를 거절(拒絶)하고 따라서 전파정보(電波情報)를 판단(判斷)하고 선별(選別)하는 것을 감소(減少)시키며 결과적(結果的)으로 잡지(雜誌)나 단행본(單行本)에서 비평(批評)을 하고 추고(推敲)하는 것이 배제(排除)될 때는 유형적(有形的) 과학(科學)은 급속(急速)히 비과학성(非科學性)을 띠게 된다는 것을 Lysenko의 생애(生涯)에 대한 Medvedev의 기술중(記述中)[7]에 지적(指摘)한 것과 관계(關係)되고 있다.

  • PDF