• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.71-74
• /
• 1994

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony ingrowth and secondary long term fixation. Bone ingrowth depends strongly on relative micromotion and stress distributions at the interface. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone-prosthesis interface, Hence an accurate evaluation of interface behavior and stress/strain fields in the bone implant system may be relevant for better understanding of clinical situations and improving THA design. However, complete evaluation of load transfer in the bone remains difficult to assess experimentally, Hence, recently finite element method (FEM) was introduced in orthopaedic research field to fill the gap due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional numerical finite element model which is composed of totally 1179 elements off and 8 node blick. We also analyzed the micromotions at the bone-stem interface and mechanical behavior of existing bone prosthesis for a loading condition simulating the single leg stance. The result indicates that the values of relative motion for this well fit Multilock stem were $150{\mu}m$ in maximum, $82{\mu}m$ in minimum, and the largest relative motion developed in medial region of proximal femur with anterior-posterior direction. The proximal region of the bone was much larger in motion than the distal region and the stress pattern shows high stress concentration on the cortex near the tip of the stem. These findings indicates that the loading in the proximal femoral bone in the early postoperative situation can produce micromotions on the interface and clinically cementless TEA patient should not be allowed weight bearing strictly early in the postoperative period.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.661-667
• /
• 2002

Welding-induced buckling distortion is one of the most problematic concerns in both design and fabrication of welded thin-plate structures. This paper deals with experimental and numerical results of the welding-induced longitudinal and/or buckling distortion occurring in welding of 6mm-thick AH36 high strength steel plates. Effects of the heat input and the plate size on the distortion were experimentally evaluated for square plates. Bead-on-plate welding was performed with the submerged arc welding process along the middle line of plate specimens. Experimental results showed that the longitudinal distortion made a single curvature in the plate, and the distortion magnitude along the weld centerline was proportional to the heat input and the plate size. The experimental results were used to examine the validity of the numerical simulation procedure for welding-induced distortion where the longitudinal distortion mode and magnitude were numerically quantified. Three-dimensional, large deformation, welding simulations were performed for selected weld models. Numerical results of the distortion mode and magnitude were in a good agreement with experimental ones. Depending on the presence of halting the distortion growth during the cooling cycle of welding, the condition discriminating buckling distortion from longitudinal distortion was established. Eigenvalue analyses were performed to check the buckling instability of tested plates with different sizes subjected to different heat inputs. The perturbation load pattern for the analysis was extracted from longitudinal inherent strain distributions. Critical buckling curve from the eigenvalue analyses revealed that the buckling instability is manifested when plate size or heat input increases.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.35-46
• /
• 2017

The purpose of the study was to review the recent literature on applying augmented reality based educational contents for students with autism spectrum disorders and to identify research trends and implications. The search procedures through the Web-database system were implemented to find the proper research and a total of 12 studies were included in this review. The results indicated that most of subjects were elementary school-age children, also single subject design was mostly implemented. Mobile devices were used mostly for augmented reality, and most of data collection methods was behavioral observation. Results founded several contents types: objects manipulation, manipulation for self-modeling, on-site problem solving program, and location-based learning guide. Additionally, the results indicated that the educational effectiveness was the improvements of social behaviors, play and imitation behaviors, and emotion recognition. Furthermore, considerations to develop and apply augmented reality based educational contents for students with autism spectrum disorders were suggested.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.79-88
• /
• 2007

As the mobile computers such as Personal Digital Assistants (PDAs) or Smart Phone has been widespread in our daily life, the demand of an extensive data input will gradually be increased. Consequently, many alternative soft keyboards have been proposed to satisfy this requirement. However none of them can provide an absolute solutions for that, the segregated guideline for keyboard arrangement and usage still cause much confusion to the user. Therefore, an integrated guideline is seriously required. In order to come up with the integrated guideline for Korean Soft keyboard GUI, the questionnaire and the experimental test compared with five soft keyboards were conducted in this study. As a result this paper presents five guidelines for improving an input speed of soft keyboard on the mobile computing; following familiarity for effective screen use, using a single key rather than grouping key, considering position of prediction word, considering prompt feedback, finally, considering optimized keyboard size.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.436-436
• /
• 2011

Recently, spintronic devices with submicron structures are widely investigated to take advantage of their unique micromagnetic properties. In this work, we study the temperature dependence of exchange bias in bilayer anti-dot arrays made by depositing Co (40 nm)/Ni (5 nm) ferromagnetic bilayer on Si substrate to form anti-dot arrays with a diameter $1{\mu}m$. The anti-dot patterning was done only for the upper Co layer, while the Ni underlayer was kept unperforated. The temperature dependences of magnetoresistance (MR) and exchange bias were studied along magnetic easy and hard axes. The in-plane MR measurements were performed using a physical-property measurement system (PPMS ; Quantum Design Inc.) at various temperatures. The standard in-line four-point probe configuration was used for the electrical contacts. As temperature was varied, the MR data were obtained in which in-plane field (H=3 kOe) was applied in the directions along the hard and the easy axes with respect to the lattice plane. The temperature dependences of magnetic anisotropy and exchange bias were also studied along the magnetic easy and hard axes. As temperature decreases, the single peak splits into two peaks. While no exchange bias was observed along the magnetic easy axis, the exchange bias field steadily increased with decreasing temperature along the magnetic hard axis. These results were interpreted in connection with the magnetic anisotropy and the effect of the anti-dots in pinning domain wall motion along the respective direction.

• Archives of Pharmacal Research
• /
• v.28 no.10
• /
• pp.1190-1195
• /
• 2005

The objective of this study was to develop an assay for mequitazine (MQZ) for the study of the bioavailability of the drug in human subjects. Using one mL of human plasma, the pH of the sample was adjusted and MQZ in the aqueous phase extracted with hexane; the organic layer was then evaporated to dryness, reconstituted and an aliquot introduced to a gas chromatograph/mass spectrometer (GC/MS) system with ion-trap detector. Inter- and intra-day precision of the assay were less than 15.1 and $17.7{\%}$, respectively; Inter- and intra-day accuracy were less than 8.91 and $18.6{\%}$, respectively. The limit of quantification for the current assay was set at 1 ng/mL. To determine whether the current assay is applicable in a pharmacokinetic study for MQZ in human, oral formulation containing 10 mg MQZ was administered to healthy male subjects and blood samples collected. The current assay was able to quantify MQZ levels in most of the samples. The maximum concentration ($C_{max}$ was 8.5 ng/mL, which was obtained at 10.1 h, with mean half-life of approximately 45.5 h. Under the current sampling protocol, the ratio of $AUC_{t{\rightarrow}last}$ to $AUC_{t{\rightarrow}{\infty}}$ was $934{\%}$, indicating that the blood collection time of 216 h is reasonable for MQZ. Therefore, these observations indicate that an assay for MQZ in human plasma is developed by using GC/MS with ion-trap detector and validated for the study of pharmacokinetics of single oral dose of 10 mg MQZ, and that the current study design for the bioavailability study is adequate for the drug.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.1-12
• /
• 2014

Recently, the need for non-stop service is increasing by the business mission-critical Internet banking, e-payment, e-commerce, home shopping, securities trading, and petition business increases, clustered in a single database of existing, redundant research on high-availability technologies related to technique, etc. is increasing. It provides an API based on the Active Log in addition to the technique of redundancy, ALTIBASE$^{TM}$ Log Analyzer (below, ALA), provides scalability and communication of the same model or between heterogeneous. In this paper, we evaluated the performance of ALA by presenting the design of the database system that you can use the ALA, to satisfy all the synchronization features high scalability and high availability, real-time.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.294-301
• /
• 2018

In winter, thermal screens are widely used to reduce heat loss from greenhouse to save energy. Unfortunately, not much data are available to the farmer to compare thermal screens while selecting the one that meets their specific requirements. Thus, there is a need to investigate the thermal performance of thermal screens. To address this issue, the Building Energy Simulation (BES) model of a hot box was used to calculate the overall heat transfer coefficient (U-value) of the thermal screens. To validate the model, computed and experimental U-values of single-and double-layered polyethylene (PE) material were compared. This validated model was used to predict the U-values of the selected thermal screens under defined weather conditions. We quantified the U-values of each selected material and significant changes in their U-values were noted in response to different weather conditions. Notably, the thermal properties of the tested screens were taken from the previous literature to calculate U-values using the BES model. The U-values of the thermal screens can help researchers and farmers evaluate their screens and make pre-design decisions that suit their investment capabilities.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.606-619
• /
• 1998

In this paper, we have tfesigned and ihlplemented ACE(Application sharing Collaboration Engine) which is pessible an application sharing to collaborate among peoples who are geographically dispersed. The application sharing is a technology whereby two or more users collaborate to share the output of single application running on one computer system to the other users, and to provide input to the applications. We defined ASO(Applicatio!1 Sharing Object) object and its behavior to share applications in real time and ACE processes a sharing using ASO object among the distributed systems. ASO is classified into activateASO, updateASO, inputASO, and controlASO. The each ASO's behavior involves both events which occur at specific moments such as keystrokes and mouse clicks and more persistent status which can be observed at any time such as the image on the screen. The implemented ACE can be applied to the data conferencing, distance education, and project collaboration for engineer in distributed environments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.542-547
• /
• 2012

Until recently, most of GCS(Ground Control Software) has been required to visualize attitude, position, status of vehicle and to transmit control and mission commands for a single UAV(Unmanned Aerial Vehicle). However, the GCS needs to expand its functions to handle more complex situations. Simultaneous operation of multiple UAVs is emerging as a new practice. Hence, we set up requirements for operation of multiple UAVs and suggest the architecture of GCS that satisfy the requirements. In this study, we analyze the upper requirements and define the total structure of GCS at first. Then we design the inner structure for requirements in detail. Finally, we verify the functions of GCS on PILS(Processor In the Loop Simulation) System.