• Journal of Information Processing Systems
• /
• 제7권3호
• /
• pp.473-518
• /
• 2011

Software measurement is a key factor in managing, controlling, and improving the software development processes. Software quality is one of the most important factors for assessing the global competitive position of any software company. Thus the quantification of quality parameters and integrating them into quality models is very essential. Software quality criteria are not very easily measured and quantified. Many attempts have been made to exactly quantify the software quality parameters using various models such as ISO/IEC 9126 Quality Model, Boehm's Model, McCall's model, etc. In this paper an attempt has been made to provide a tool for precisely quantifying software quality factors with the help of quality factors stated in ISO/IEC 9126 model. Due to the unpredictable nature of the software quality attributes, the fuzzy multi criteria approach has been used to evolve the quality of the software.

• 정보교육학회논문지
• /
• 제2권1호
• /
• pp.35-51
• /
• 1998

Software reliability growth model is one of the evaluation methods, software quality which quantitatively calculates the software reliability based on the number of errors detected. For correct and precise evaluation of reliability of certain software, the reliability model, which is considered to fit dose to real data should be selected as well. In this paper, the optimal model for specific test data was selected one of among five software reliability growth models based on NHPP(Non Homogeneous Poission Process), and in result reliability estimating scales(total expected number of errors, error detection rate, expected number of errors remaining in the software, reliability etc) could obtained. According to reliability estimating scales obtained, Software development and predicting optimal release point and finally in conducting systematic project management.

• 인터넷정보학회논문지
• /
• 제7권4호
• /
• pp.1-10
• /
• 2006

소프트웨어 품질 평가와 관련하여 국제 표준에 대한 연구가 활발히 진행되어지고 있다. 소프트웨어 품질은 사용자와 개발자에 있어서 더욱더 중요해 지고 있다. 본 논문에서는 첫째, 소프트웨어 품질을 객관적이고 정량적으로 평가하기 위해서 소프트웨어 품질 평가에 대한 국내외 표준 동향을 조사 연구 한다. 둘째, 소프트웨어 품질 평가를 위한 국내외 표준의 새로운 연구 방향에 대해서 제시하고 셋째, 소프트웨어 품질 평가 중 신뢰성 분야에 대한 평가 방안을 소프트웨어 신뢰성 성장 모델에 적용하여 평가할 수 있도록 제시한다. 넷째, 소프트웨어 품질 평가 국제 표준의 보급 방안에 대해서 연구하고 다섯째, 소프트웨어 품질 평가와 관련해서 ISO/IEC 9126과 ISO/IEC 25000 시리즈의 소프트웨어 품질 평가 국제 표준 내용을 통한 적용방안에 대해서 연구한다.

• 인터넷정보학회논문지
• /
• 제8권4호
• /
• pp.119-128
• /
• 2007

본 연구는 데이터 품질 평가란 관점에서 현재 진행되어지고 있는 국제 표준 ISO/IEC 25000시리즈인 SQuaRE(Software Quality Requirements and Evaluation) 프로젝트 중에서도 ISO/IEC 25012의 데이터 품질 평가 모델에 대한 연구이다. 데이터의 양이 많아지면서 사용자 관점에서는 정확한 데이터, 최신의 데이터, 사용하는 도구에 적합한 데이터, 보안성과 비 공개성을 준수할 수 있는 데이터를 원한다. 저 품질의 데이터가 비즈니스에 미치는 영향을 평가하여 실제적으로 적용할 수 있는 관점에서 데이터 품질 관리에 대한 것을 연구한다. 이러한 관점에서 데이터에 대한 품질을 평가할 수 있는 평가항목을 제시하고 제시된 평가항목의 평가 방안에 대해서 제시한다. 본 연구는 현재 진행되어지고 있는 ISO/IEC 25012의 표준문서와 소프트웨어 품질관리 표준문서 ISO/IEC 9126-2를 기초로 하여 연구되었으며 현재 진행되어지고 있는 소프트웨어 품질평가 모델 ISO/IEC 2500을 기반으로 하여 데이터 품질을 정량적으로 평가하는 방안을 제시한다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.1006-1013
• /
• 2002

The multiplicity of operating systems brings about a choice problem to the end-user and a multi-fold intensity to the competing developer. This study intends to provide guidelines solving the problems for both the end-user and the developers of operating systems. For the purpose, we adopt an appropriate evaluation model in terms of user-perceived quality through the applicable criteria and an evaluation method. Briefly, reliability and portability are key factors to contribute to the perceived duality. The empirical study also illustrates a comparative analysis on the dominant products. Microsoft Windows and Linux, in Korea.

• 산업공학
• /
• 제17권1호
• /
• pp.93-103
• /
• 2004

Service importance has been growing increasingly as competition element of enterprises according to going on rapid softness, information and knowledge of industrial infrastructure recently. Quality management system that implemented in manufacturing sector have been spreading rapidly to service company, but the company performing pure engineering service only in construction fields performed mainly the evaluation on the operational aspect such as degree of implementation of the established system because it is difficult to objective evaluation on the activity of the established quality management system or quality assurance system. This study would like to make on offer the improvement points based on the evaluation of service quality and the itself evaluation result through the questionnaire on the service offerers and customers using the pre-qualified SERVQUAL model in establishment of the improvement goal of the company. According to the result of this study, it is analyzed a gap and required to establish a counter-plan to correct many gaps discovered between the real offered level and the expect level of custom.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.21-28
• /
• 2012

Development of the system that has required performance is the most important figure and that is the key of project succeed. In order to perform that, systems engineering has come to the fore as a solution. In each step of system engineering process, particularly, requirement analysis and derivation, logical solution, architecture design step are known to affect many of the function and efficiency. Of these, this paper focus on architecture design. We introduce methodology for physical architecture design by applying DSM(Design Structure Matrix) methodology which is based on result of logical solution from MBSE methodology.

• 무역학회지
• /
• 제47권3호
• /
• pp.111-128
• /
• 2022

This study tried to verify the effect of situational consumer animosity on consumer attitudes and behaviors with the moderating effect of cultural internalization. For this purpose, 460 valid survey data were collected from Koreans. The causal and regulatory relationships between the variables were analyzed through confirmatory factor analysis and structural model analysis using AMOS with the collected data. It was confirmed that the national situational animosity had a negative effect on quality evaluation, while personal situational animosity did not. Also, the positive relationship between quality evaluation and purchase intention was confirmed. In addition, it was found that internalization of individual culture moderates the effect of quality evaluation on purchase intention.

• 한국비블리아학회지
• /
• 제20권4호
• /
• pp.191-204
• /
• 2009

데이터베이스 시스템의 사용자 만족과 품질 관리를 위해서는 사용자 요구사항 및 품질 특성의 정확한 이해와 함께 적절한 품질 측정과 평가가 필수적이다. ISO 25000 시리즈를 기반으로 1차 연구에서 도출된 데이터베이스 시스템 품질 평가 모델에서는 5가지 주품질특성과 이에 따른 21가지 부품질특성, 48개의 내부품질특성의 3단계 계층구조를 제시하였다. 주품질특성, 부품질특성, 내부품질에 대한 우선순위(상대적 가중치) 부여 방법에 대한 연구는 일부 있으나 품질 모형을 데이터베이스 시스템 산업현장에서 직접 사용하는 것은 쉽지 않다. 또한 품질평가를 위한 시간과 비용을 고려할 때 48개 내부품질특성을 모두 평가한다는 것은 현실적으로 거의 불가능하며 데이터베이스 시스템에서 요구되는 무결성 수준에 따라 품질평가의 수준도 다르다. 본 연구에서는 다목표의사결정기법의 하나인 AHP(Analytical Hierarchy Process)기법을 이용하여 데이터베이스 시스템 품질특성을 가중치에 따라 선정하는 방법을 제시하고 이를 통해 품질모형의 현실적인 적용 가능성을 제공할 수 있다.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.693-708
• /
• 2013

Purpose: This study is to develop an evaluation model for analysis of CMMS Implementation status and provide CMMS advancement methods to maximize implementation effect through the evaluation model. Methods: After extracting common modules from CMMS packages and establishing evaluation standard for each module, then the evaluation standard is applied to 33 Korean companies for evaluating their own current implementation status. Results: Preventive maintenance and analysis information modules were considered the most vulnerable in Korean companies which have introduced CMMS packages. And the reason why preventive maintenance is vulnerable is that there is poor build-up of their own preventive maintenance standards. Conclusion: Korean companies which will introduce CMMS need to make preventive maintenance standards, and data of the materials and the equipment to improve the effectiveness in advance.