• International Journal of Internet, Broadcasting and Communication
• /
• 제10권2호
• /
• pp.51-59
• /
• 2018

Health care has attracted a lot of attention, recently due to an increase in life expectancy and interest in health. Various biometric data of the user are collected by using the air pressure sensor, gyro sensor, acceleration sensor, and heart rate sensor to perform the Smart Health Care Activity Tracker function. Basically, smartphone application is made and tested for biometric data collection, but the Arduino platform and bio-signal measurement sensor are used to confirm the accuracy of the measured value of the smartphone. Use the Google Maps API to set user goals and provide guidance on the location of the user and the points the user wants. Also, the basic configuration of the main UI is composed of the screen of the camera, and it is possible for the user to confirm the forward while using the application, so that accident prevention is possible.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.456-459
• /
• 2002

This paper describes fabrication and characteristics of ceramic pressure sensor for working at high temperature. The proposed pressure sensor consists of a Ta-N thin-film, patterned on a Wheatstone bridge configuration, sputter deposited onto thermally oxidized Si membranes with an aluminium interconnection layer. The fabricated pressure sensor presents a low temperature coefficient of resistance, high sensitivity, low non-linearity and excellent temperature stability. The sensitivity is 1.097~1.21mV/$V{\cdot}kgf/cm^2$ in the temperature range of $25{\sim}200^{\circ}C$ and the maximum non-linearity is 0.43 %FS.

• 한국정보통신학회논문지
• /
• 제26권2호
• /
• pp.329-332
• /
• 2022

Since IoT devices include various sensors and drivers, application programmers need to understand the structure and characteristics of sensors and actuators. If the manufacturer provides the driver of the sensor or actuator, IoT development can be efficiently carried out, which is called the Plug & Play technique. What matters is that the technique proposed by this research team in the past are not suitable for Arduino or Raspberry-Pi, which are recently used. In this paper, we propose a USB sensor device that can be mounted on a Raspberry-Pi. When the device is plugged into the Raspberry-Pi, the built-in driver is transmitted and played. The configuration of the USB sensor device was presented, and considerations for chip selection for processing sensors and drivers were presented.

• 전기학회논문지P
• /
• 제61권1호
• /
• pp.18-22
• /
• 2012

In this paper, we propose a sensor-based LED lighting system that can significantly reduce standby powers. The proposed LED lighting system has the more advanced power circuit and control mechanism compared to existing one. The whole power circuit consists of two subcircuits. One is designed to apply electric powers to controller, PIR(Pyroelectric Infrared Ray) sensor and CdS, and the other one is designed to apply electric powers to LED module. Such a power circuit configuration makes the standby powers reduction of LED lighting system possible. From the experimental results, we confirmed that the standby powers saving performance of the developed power circuit is superior to that of the conventional one.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.405-409
• /
• 2001

This paper describes fabrication and characteristics of metal thin-film pressure sensor for working at high temperature. The proposed pressure consists of a chrom thin-film, patterned on a Wheat stone bridge configuration, sputter-deposited onto thermally oxidized Si membranes with an aluminium interconnection layer. The fabricated pressure sensor presents a low temperature coefficient of resistance, high-sensitivity, low non-linearity and excellent temperature stability. The sensitivity is 1.097∼1.21mV/V$.$kgf/$\textrm{cm}^2$ in the temperature range of 25∼200$^{\circ}C$ and the maximum non-linearity is 0.43%FS.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.20-25
• /
• 2022

This paper presents a development of simulation environment for validation of autonomous driving (AD) algorithm based on Robot Operating System (ROS). ROS is one of the commonly-used frameworks utilized to control autonomous vehicles. For the evaluation of AD algorithm, a 3D autonomous driving simulator has been developed based on LGSVL. Two additional sensors are implemented in the simulation vehicle. First, Lidar sensor is mounted on the ego vehicle for real-time driving environment perception. Second, GPS sensor is equipped to estimate ego vehicle's position. With the vehicle sensor configuration in the simulation, the AD algorithm can predict the local environment and determine control commands with motion planning. The simulation environment has been evaluated with lane changing and keeping scenarios. The simulation results show that the proposed 3D simulator can successfully imitate the operation of a real-world vehicle.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.1501-1504
• /
• 2004

We describe a Bluetooth wireless sensor network for security systems, which includes the implementation issues about system architecture, power management, self-configuration of network, and routing. We think that the methods or algorithms described in this paper can be easily applied to other embedded Bluetooth applications for wireless networks.

• 한국정보통신학회논문지
• /
• 제15권12호
• /
• pp.2687-2696
• /
• 2011

해양 센서 네트워크에서 클러스터링 문제는 네트워크 수명 및 확장성을 향상시키기 위한 문제 중 하나이다. 본 논문은 모든 노드가 클러스터 헤더를 통하여 싱크 노드로 데이터를 전송하는데 사용되는 전송 에너지를 최소화할 수 있는 클러스터링 문제의 최적 결과를 찾는 알고리즘을 제안한다. 일반적으로 네트워크에서 노드의 수가 증가하면 적절한 클러스터 구성을 위한 계산량은 급격히 늘어나게 된다. 본 논문에서는 적정한 시간 내에 최적의 클러스터 구성을 위한 유전 알고리즘을 제안하며, 효율적인 검색을 위해 유전 알고리즘의 효과적인 이웃해 생성 동작을 제안한다. 제안된 알고리즘은 전송 에너지와 실행시간 관점에서 성능을 평가하며, 평가 결과에서 제안된 알고리즘이 해양 센서 네트워크에서 클러스터를 효과적으로 구성함을 보인다.

• 센서학회지
• /
• 제29권2호
• /
• pp.118-122
• /
• 2020

This paper proposes a specific sensor-design strategy and the possibility of improving the sensing performance, which can be obtained by replacing part of the existing plasmonic sensor based on the Kretschmann configuration method with an effective refractive-index layer. By replacing the metal layer with an effective refractive-index layer composed of gold and the material to be sensed, an improvement in the detection performance, accompanied by an increase in the sensed incident angle, is observed, and the gold-composition ratio that demonstrates the best result is presented. Subsequently, an increase in the sensed incident angle generated in the previous step can be suppressed by randomly etching a portion of the prism adjacent to the metal layer in a sub-wavelength scale. Finally, this study analyzes the optimization of the metal-layer thickness in a given sensor structure. An effective refractive thin-film surface plasmon resonance sensor design that can achieve optimal sensing performance is then proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.738-739
• /
• 2007

This paper presents the sensor networking technologies and the process of selecting the suitable technology for the transmission line and facilities monitoring system.