• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.643-645
• /
• 1994

Chitin and chitosan has been almost neglected until 1960s, although they are the second largest biomass on earth. Their major use were as a natural flocculant for waste-water treatment, and partially used in the areas of food, feed industry, cosmetics and medicine. Possible sources of chitin among biomass were tested, and antibacterial activity and viscosity-concentration relation- ship of diluted acidic solution were examined.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.591-601
• /
• 2007

Spatial information on forest biomass is an important factor to evaluate the capability of forest as a carbon sequestrator and is a core independent variable required to drive models which describe ecological processes such as carbon budget, hydrological budget, and energy flow. The objective of this study is to understand the relationship between satellite image and field data, and to quantitatively estimate and map the spatial distribution of forest biomass. Landsat Enhanced Thematic Mapper (ETM+) derived vegetation indices and field survey data were applied to estimate the biomass distribution of mountainous forest located in Gwangneung Experimental Forest (230 ha). Field survey data collected from the ground plots were used as the dependent variable, forest biomass, while satellite image reflectance data (Band 1~5 and Band 7), Normalized Difference Vegetation Index (NDVI), Soil-Adjusted Vegetation Index (SAVI), and RVI (Ratio Vegetation Index) were used as the independent variables. The mean and total biomass of Gwangneung catchment area were estimated to be about 229.5 ton/ha and $52.8{\times}10^3$ tons respectively. Regression analysis revealed significant relationships between the measured biomass and Landsat derived variables in both of deciduous forest ($R^2=0.76$, P < 0.05) and coniferous forest ($R^2=0.75$, P < 0.05). However, there still exist many uncertainties in the estimation of forest ecosystem parameters based on vegetation remote sensing. Developing remote sensing techniques with adequate filed survey data over a long period are expected to increase the estimation accuracy of spatial information of the forest ecosystem.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.1-5
• /
• 2015

This study is to investigate the effect of torrefaction on enzymatic hydrolysis of lignocellulosic biomass for bio-ethanol production. As a pretreatment, the torrefaction of lignocellulosic biomass was conducted in temperature of $250{\sim}350^{\circ}C$ in the absence of oxygen. Tween-80, nonionic surfactant, was tested to enhance saccharification efficiency by coping with hydrophobicity resulted from torrefaction. As a result, the glucose production from enzymatic hydrolysis of biomass pretreated by torrefaction was greater than that obtained from the non-pretreated biomass. Sugar conversion was higher when the biomass was saccharified with addition of tween-80. It was found that torrefaction can be applied as a preptreatment for lignocellulosic biomass and tween-80 is needed to enhance its enzyme saccharification.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.393-399
• /
• 2020

The use of different types of wastewater (WW) for the cultivation of microalgae and cyanobacteria during recent decades has provided important economic and environmental benefits. However, direct use of WW can lead to growth inhibition and biomass contamination. In the present study, we separated the key WW nutrients, namely nitrate and phosphate, by adsorption and regeneration and used the resulting regenerated water to cultivate the cyanobacterium Spirulina platensis. The adsorbent was granular γ-alumina derived from waste aluminum cans. This procedure recovered 19.9% of nitrate and 23.7% of phosphate from WW. The cyanobacterial cultures efficiently assimilated the nutrients from the medium prepared using regenerated WW, and the growth and nutrient uptake were similar to those in a synthetic medium. In addition, imposing nutrient limitations to increase carbohydrate productivity was easily achieved using regenerated wastewater nutrients, without requiring additional dilution or complex processing. In acute toxicity tests, the harvested biomass in a regenerated medium had similar toxicity levels compared to the biomass obtained from a synthetic medium. The proposed method of using regenerated WW to produce contamination-free biomass has broad potential applications.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.74-81
• /
• 1985

Dimension analysis was used to estimate biomass and net primary production(NPP) in a 36-year-old Japanese red pine (Pines densiflora S. et Z.) natural forest in Kangwondo. Best estimation was made by the equation model of $Wt=aD^bH^c$ where Wt is weight in kg, D is DBH in cm, and H is total tree height in m. Total aboveground biomass was estimated at 198.82 t/ha. Organic matter was distributed in the Japanese red pine stand as follows ; bolewood 68.8%, live branches 16.5%, bolebark 5.4%, foliage 4.6%, dead branches 3.7%, and cones 0.6%. Net primary production was estimated at 15.87 t/㏊/yr and was distributed: bolewood 44.5%, live branches 30.9%, foliage 14.1%, current twig 7.1%, and bolebark 3.3%. Leaf efficiency was estimated at 1.876. The power equation for biomass and IVPP yielded similar results as the results for Pines densiflora in Japan.

• Journal of Environmental Science International
• /
• v.2 no.4
• /
• pp.325-330
• /
• 1993

A number of experiments were conducted in order to investigate the organic removal efficiency and biomass characteristics according to the organic shock loading rate in a fluidized bed biofilm reactor. At the operation conditions of HRT, 8.44 hour, superficial upflow velocity, 0.9 cm/sec and temperature, 22$\pm$$1^{\circ}C$, the removal efficiency of SCOD was founded to be 96.5, 92 and 90 % with the organic shock loading rate of 3.5, 10.8 and 33 kgCOD/m$^3$ㆍday, respectively. Within the F/M ratio ranged 0.4 to 2.0 kgCOD/kgVSSㆍday, the SCOD removal efficiency was shown as 90% at F/M ratio of 2.0 kgCOD/kgVSSㆍday, but the TCOD removal efficiency was 72 % at F/M ratio of 1.8 kgCOD/kgVSSㆍday. The average biomass concentrations were 7800, 14950 and 27532 mg/l on the organic shock loading rate of 3.5, 10.8 and 33 kgCOD/$\textrm{m}^3$ㆍday, respectively. This result was agreed with the fact that more biomass could be produced at high concentration of substrate, but some biomass was detached at the onset of shock and easily acclimated at the shock condition.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.97-110
• /
• 2005

This paper is the second part of a literature review describing the current status of biomass energy use in the USA. The bioenergy technologies that convert biomass resources to a form of energy were presented, in particular focused on existing coal fired boiler, high efficiency gasification combined cycle. We presented latest biomass power energy supply, economic issues such as its production and plant investment cost in the Part I. In the Part II, our review summarized policy and market issues for electricity consumers, benefits from biomass power which could offer an alternative to conventional energy sources in the form of environmental, rural economic growth, and national energy security in the USA.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.640-646
• /
• 2018

Biomass-fired power plants produce electricity and heat by burning biomass in a boiler. However, one of the most serious problems faced by these plants is severe corrosion. In biomass boilers, corrosion comes from burnt fuels containing alkali, chlorine, and other corrosive substances, causing boiler tube failures, leakages, and shorter lifetimes. To mitigate the problem, various approaches implying the use of additives have been proposed; for example, ammonium sulfate is added to convert the alkali chlorides (mainly KCl) into the less corrosive alkali sulfates. Among these approaches, the high temperature corrosion prevention technology based on ammonium sulfate has few power plants being applied to domestic power plants. This study presents the results obtained during the co-combustion of wood chips and waste in a circulating fluidized bed boiler. The aim was to investigate the characteristics of pollution load in domestic biomass power plants with ammonium sulfate injection. By injecting the ammonium sulfate, the KCl content decreased from 68.9 to 5 ppm and the NOx were reduced by 18.5 ppm, but $SO_2$ and HCl were increased by 93.3 and 68 ppm, respectively.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.41-44
• /
• 2014

This study focused on the effect of the biomass blended ratio on air-staged pulverized coal furnace. The hybrid NOx reduction technology between fuel blending and air staging has been applied in an air-staged pulverized coal fired furnace. The results indicated that co-firing biomass with coal could reduce NOx emissions in an air-staged combustion. In addition, carbon burnout and flame temperature increased under the air-staged condition. A dominant synergistic effect on NOx reduction and carbon burnout was observed when biomass co-firing with coal was applied in air staged combustion.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.6
• /
• pp.397-407
• /
• 1990

Surface phytoplankton biomass was measured at approxinately one month intervals from July 1986 to August 1987. There was a peak phytoplankton biomass in the very low salinity region during summer and autumn when river discharge was low. The peak biomass occurred independent of the tidal state, location of nutrient input, nutrient concentration and temperature. The peak biomass are probably caused by the hydrodynamic trapping, density-seletive retention of particles by esturarine circulation.