• 한국초지조사료학회지
• /
• 제40권4호
• /
• pp.236-243
• /
• 2020

본 연구는 사료용 벼 사일리지의 사료가치를 평가하고 반추위 발효성상을 이용하여 사료용 벼 사일리지와 배합사료의 적정 비율을 조사하고자 하였다. 사료가치 평가는 AOAC(2019)에 따라 분석하였고, 영양소 소화율 예측은 NRC(2001)의 수식을 기반으로 산출하였다. In vitro 반추위 발효시험은 총 6개의 시험구로 구성되었고, 반추위 pH, 가스생성량, 암모니아태 질소 및 휘발성 지방산을 측정하였다:T1(100:0), T2(60:40), T3(40:60), T4(20:80), T5(10:90), T6(0:100). 영양소 소화율 시험에서는 사료용 벼 사일리지 비율에 따라 40:60(W40), 20:80(W20) 및 10:90(W10)로 나누어 수행하였다. 사료용 벼 사일리지의 조단백질, 조지방 및 NDF 함량은 각각 12.29%, 1.67%, 59.79%로 측정되었다. 또한 NRC(2001)을 이용한 사료용 벼 사일리지의 TDN 예측 결과는 51.49%로 나타났다. 반추위 발효 in vitro 결과, 가스생성량과 총 휘발성 지방산생성량은 T4, T5 및 T6에서 다른 시험구보다 유의적으로 높았다(p<0.05). 초산과 AP ratio도 T4, T5 및 T6에서 유의적으로 높게 나타났다(p<0.05). 프로피온산 및 낙산에서는 사료용 벼 사일리지와 배합사료의 비율의 변화에 따라 유의적인 차이를 보였다(p<0.05). 건물 및 조단백 소화율은 W40에서 유의적으로 낮은 결과를 보였으나(p<0.05), W20 및 W10은 유의적 차이가 없었다. 따라서 사료용 벼 사일리지는 사료로서 가치가 있다고 판단된다. 또한, 사료용 벼 사일리지와 배합사료의 급여비율을 20:80하는 것이 반추위 발효 및 영양소 소화를 저해하지 않는 수준에서 농가의 경제성에도 긍정적일 것으로 생각된다.

• 한국전자파학회논문지
• /
• 제17권3호
• /
• pp.272-279
• /
• 2006

본 논문에서는 W-CDMA(Wide band Code Division Multiple Access) 시스템에서 채널 측정 및 프레임 동기 확인에 사용되는 파일럿 비트 패턴의 프레임 동기 단어(frame synchronization words) 성능을 분석한다. 또한 W-CDMA 시스템에서는 두 개의 수신 단말기를 갖지 않고도, 다른 주파수의 측정을 하기 위해 압축 모드(compressed mode)를 사용한다. 제안된 프레임 동기용 이원 부호의 우선 쌍 간의 보완 매핑(complementary mapping) 관계를 이용하면, 압축 모드에서도 프레임 동기 특성을 유지함을 컴퓨터 시뮬레이션을 통하여 확인한다. 검출 확률과 오 경보 확률을 갖는 수신기 동작 특성(ROC: Reciever Operating Characteristic) 곡선은 LLRT(Log Likely-hood Ratio Test), GLRT(Generalied Likeiyhood Ratio Test), 연판정(soft correlation test), 경 판정(hard correlarion test)과 같은 다양한 검출법(detection metrics)을 이용하여 레일레이 페이딩 채널에서 제안된 프레임 동기 단어의 성능 분석에 사용된다. 이 논문의 파일럿 비트 패턴의 성능에 대한 연구 결과는 3세대 W-CDMA 시스템에서 프레임 동기의 설계 및 구현에 유용한 참고 자료가 될 수 있을 것이다.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.73-89
• /
• 2016

The stress dependence of ultrasonic wave velocity is known as the acoustoelastic effect. This effect is useful for stress monitoring if the acoustoelastic coefficient of a subject medium is known. The acoustoelastic coefficients of metallic materials such as steel have been studied widely. However, the acoustoelastic coefficient of concrete has not been well understood yet. Basic constituents of concrete are water, cement, and aggregates. The mix proportion of those constituents greatly affects many mechanical and physical properties of concrete and so does the acoustoelastic coefficient of concrete. In this study, influence of the water-cement ratio (w/c ratio) and the fine-coarse aggregates ratio (fa/ta ratio) on the acoustoelastic coefficient of concrete was investigated. The w/c and the fa/ta ratios are important parameters in mix design and affect wave behaviors in concrete. Load-controlled uni-axial compression tests were performed on concrete specimens. Ultrasonic wave measurements were also performed during the compression tests. The stretching coda wave interferometry method was used to obtain the relative velocity change of ultrasonic waves with respect to the stress level of the specimens. From the experimental results, it was found that the w/c ratio greatly affects the acoustoelastic coefficient while the fa/ta ratio does not. The acoustoelastic coefficient increased from $0.003073MPa^{-1}$ to $0.005553MPa^{-1}$ when the w/c ratio was increased from 0.4 to 0.5. On the other hand, the acoustoelastic coefficient changed in small from $0.003606MPa^{-1}$ to $0.003801MPa^{-1}$ when the fa/ta ratio was increased from 0.3 to 0.5. Finally, it was also found that the relative velocity change has a linear relationship with the stress level of concrete.

• 대한화학회지
• /
• 제52권2호
• /
• pp.164-168
• /
• 2008

마이크로 에멀젼 방법으로 CaWO4 결정을 합성하였다. CTAB에 대한 H2O의 몰랄 농도비(w)를 변 화시켜서 다양한 크기와 형태의 CaWO4를 얻었다. w=5와 w=10일 때 각각 100 nm와 500 nm 길이의 타원형 CaWO4 결정을 얻었다. w=20일 때는 1 μm의 막대형 CaWO4 결정을 얻었다. w=30에서는 길이가 약 2~3 μm인 구형의 CaWO4 결정을 얻었다. CTAB에 대한 H2O의 몰랄 농도비가 증가 할수록 응집에 의해서 CaWO4 결정 의 모양은 타원형에서 막대형태를 거쳐서 구형으로 변했다.

• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.275-281
• /
• 2017

본 연구는 물-결합재비(water-to-binder ratio, W/B) 및 인산염-결합재비(phosphate-to-binder ratio, P/B)가 마그네시아-인산칼륨 시멘트(magnesium-potassium phosphate cement, MKPC) 모르타르의 플로, 응결시간, 압축강도발현 및 pH 변화에 미치는 영향성에 대한 평가이다. MKPC 모르타르의 P/B가 0.3 및 0.5일 때 W/B 범위 20~40%에 대하여 10 배합의 모르타르 실험을 실시하였으며, X-선 회절 분석(X-ray diffraction, XRD), 전자현미경(scanning electron microscope, SEM) 및 수은압입법(mercury intrusion porosimetry, MIP) 분석을 위해 MKPC의 반응생성물 및 미세공극분포를 평가하였다. 실험결과, MKPC 모르타르의 플로 및 응결시간은 P/B의 증가에 따라 감소하였으며, P/B가 0.3에서 0.5로 증가함에 따라 종결시간은 약 24% 감소하였다. MKPC 모르타르의 초기 압축강도 발현 기울기의 경우 콘크리트 구조기준에서 제시하는 시멘트 콘크리트 대비 높은 수준에 있었다. 재령 28일의 압축강도 30 MPa 이상 및 pH 9.0 이하를 만족하기 위해 MKPC 모르타르의 P/B 및 W/B는 각각 0.5이상 및 30% 이하가 추천된다. MKPC의 반응생성물인 스트루바이트(struvite)-K의 결정은 MKPC의 P/B 및 W/B가 높을수록 증가하였는데, 이로 인해 거대 모세관 공극은 감소하였다.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.67-74
• /
• 2000

The usage of nondestructive testing on early-aged concrete leads to enhacned safty and allows effective scheduling of construction, thus making it possible to maximize the time and cost efficiencies. In this study, a reliable nondestructive strength evaluation method for early-aged concrete using the longitudinal wave velocity is proposed. Compression tests were performed to examine factors influencing the velocity-strength relationship of concrete, such as water-cement (w/c) ratio, fine aggregate ratio, curing temperature, and curing condition. The test results show that a change in the w/c ratio and curing temperature has minor effect on the velocity-strength relationship/ However, curing condition significantly influences the velocity-strength relationship of early-aged concrete. Moreover, the longitudinal wave velocity increases with decreasing fine aggregate ratio. It is concluded from this study that the strength evaluation of early-age concrete can be achieved by a nonlinear equation which considers the effects of curing condition and fine aggregate ratio.

• Journal of Pharmaceutical Investigation
• /
• 제6권3호
• /
• pp.48-57
• /
• 1976

An enhancement in the dissolution rate of the drug should facilitate its GI absorption if the absorption process is dissolution rate limited. One of the need for the techniques that can potentially enhance the dissolution rate and extent of absorption of hydrophobic drugs is the formation of coprecipitates with pharmacologically inert, polymeric materials. The physicochemical modification offers the advantage of possibly enabling one to administer the drug orally in a form from which it is most available for GI absorption. Several $investigation^{1-15)}$ demonstrated that the formation of solid dispersions or coprecipitates of relatively water-insoluble drugs with various pharmacologically inert carriers can increase singnificantly their in vitro dissolution rates. However, little information is available in the literature related to the dissolution rate patterns of furosemide, a water-insoluble diurectices, with respect to the sort of copolymer and the ratio of coprecipitates as a function of time, respectively. The purpose of the present investigation was to ascertain, the general applicability of the copolymers to use fore more fast, enhanced dissolution techniques of furosemide. To accomplish the need for enhancement in the dissolution rate of furosemide, varying ratio coprecipitates with different water-soluble polymers, such as polyvinylpyrrolidone (PVP), polyethylene glycol 4000(PEG 4000), and polyethylene glycol 6000 (PEG 6000), were quantitatively studied by comparing their dissolution characteristics of furosemide. The dissolution patterns of pure furosemide, varying ratio furosemide-PVP coprecipitates, (1:2, 1:5, and 1:9(w/w)), furosemide-PEG 4000 coprecipitates (1:4, 1:9, and 1:19(w/w), furosemide-PEG 6000 coprecipitates(1:4, 1:9, and 1:19(w/w)), and the same ratio physical mixtures, respectively, were compared by the amount dissolved as a function of time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.163-168
• /
• 2002

Through the developing measuring system of gas diffusivity, the experiments on carbon dioxide diffusivity in concrete carry out. From this, some important results was achieved. First, the times of reaching the steady state condition don't depend on the water/cement ratio with linearity. But, for the 0.42 w/c ratio the duration of the non-steady state condition is long. Second, in constant relative humidity, the diffusion coefficient shows linearity for the w/c ratio. Third, for the same w/c ratio, the influence of relative humidity on the diffusivity is very large. This shows the importance of the environmental condition for the carbonation. This study on $CO_2$ diffusivity in concrete is the first attempt within a country and will be important data.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.847-851
• /
• 2000

In this study, contour-vibration-mode Pb($Ni_{1/2}$,$W_{1/2}$)$O_3$-Pb(Zr,Ti)$O_3$ piezoelectric transformers for driving a 28W(T5) fluorescent lamp were fabricated to the modified filter structure with ring and dot electrodes which has been developed for application in 455kHz AM radios. The piezoelectric transformers were fabricated to the size of $31.5$\times$31.5$\times$2.5$mm^3$ with the variations of ring/dot electrode area ratio. Driving of piezoelectric transformer was carried out with input region for the ring electrode and output region for the dot electrode. The electrical properties and characteristic temperature rises caused by the vibration were measured at various load resistances. A 28 W fluorescent lamp, T5, was successfully driven by the fabricated transformer. The transformer with ring/dot electrode area ratio of 1.83 exhibited the best properties in terms of output power, efficiency and characteristic temperature rise, 30.95 W, 97.57% and8.3$^{\circ}C$ respectively.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2533-2542
• /
• 1994

This paper suggests a simple approach to determining the screw characteristics for a three0dimensional flow in a channel with a finite aspect ratio(ratio of a width to a depth, W/H) by introducing a Total Shape Factor($F_t$) to correct a two-dimensional flow analysis for a channel with an infinite aspect ratio. In the present study, the Total Shape Factor($F_t$) was defined as a ratio of a net flow rate obtained by the three-dimensional analysis to that by the two-dimensional analysis. In the proposed approach, the quantity, $ \frac{{\partial}F_t}{\partial(H/W)}$ turns out to be almost constant and to play an important role in understanding the effects of the flights. Therefore, $ \frac{{\partial}F_t}{\partial(H/W)}$ are extensively reported in this paper in terms of several dimensionless parameters. This simple approach with such database will be very useful for extruder designers to predict the screw characteristics.