• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.504-504
• /
• 2000

The flow ratio in the industrial process is usually accomplished by using PID controller with series type ratio. But always the large overshoot and a long rise time may be achieved from this conventional control. These problems are involved to the inexact flow ratio control. In order to avoid this poor performance. the paper presents a designing of the two controller modes for the flow ratio plants. This proposed controller combine the lookup table technique and the well-known PID controller to obtain the fast response and low overshoot of flow ratio control. The PID controller mode will be operated when the flow ratio reaches the preset value while the lookup table technique mode is applied for initial operation. The data in tile table is calculated by the valve sizing equation and convened to the valve position control signal. The experimental results show that the transient and steady state responses of the control systems using the proposed technique can be efficiently obtained when compared with tile conventional controller.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.519-523
• /
• 2008

Poisson's ratio is one of elastic constants of elastic solids. However, it has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Hard couplant for transverse wave prevents transducer from scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was proposed. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected. Transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio can be determined without information of specimen thickness. This technique was demonstrated for aluminum and steel specimens.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.317-323
• /
• 2017

Due to the unique characteristic of auxetic material, negative poisson's ratio, it has a variety of distinctive properties compared to conventional materials. Numerous researches have been conducted on the auxetic material in order to find out how to make auxetics. In this study, we analyzed triangular and rectangular patterned rotating rigid units using finite element method. Our purpose is to investigate the mechanical properties of the rotating rigid units and to show their auxetic behaviors. We studied the Poisson's ratio and the bulk modulus of the rotating rigid units depending on their unit cell sizes. The Poisson's ratio and the bulk modulus decreased as the number of unit cells increased. Also, when the geometry of the unit cell was changed, the tendency of the Poisson's ratio and the bulk modulus was also different from the previous case. The results of the Poisson's ratio and the bulk modulus referred that they were critically affected by the number of unit cells and the shape of unit cell.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1135-1140
• /
• 2001

The purpose of this study is to investigate the shrinkage properties of high strength concrete according to the S/A ratio at early age. The main parameters are as follows : S/A ratio is 30, 35, 38, 41, 45%, W/B ratio 24.9%, SF/B ratio 8%. FA/B 15%. The size of specimen is l0$\times$10$\times$40cm and the shrinkage is measured by the embedded gage at each end of the specimens. From the test, it was found that the slump-flow of concrete was high, and also autogenous shrinkage increased and drying shrinkage decreased as S/A ratio increased.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.519-524
• /
• 2009

This work presents a simple technique to determine the Poisson's ratio of homogeneous solid material using a pair of low cost PVDF ultrasonic transducers. It is based on transducer's property of generating longitudinal and transversal waves depending on the excitation frequency. Mechanical tests were conducted to validate the proposed method, resulting in a good agreement between ultrasonic and mechanical techniques.

• Wind and Structures
• /
• 제6권4호
• /
• pp.263-278
• /
• 2003

This study investigates the effects of a bridge deck's width-to-depth (B/H) ratio and turbulence on buffeting response and flutter critical wind speed of long-span bridges by conducting section model tests. A streamlined box section and a plate girder section, each with four B/H ratios, were tested in smooth and turbulent flows. The results show that for the box girders, the response increases with the B/H ratio, especially in the vertical direction. For the plate girders, the vertical response also increases with the B/H ratio. However, the torsional response decreases as the B/H ratio increases. Increasing the B/H ratio and intensity of turbulence tends to improve the bridge's aerodynamic stability. Experimental results obtained from the section model tests agree reasonably with the calculated results obtained from a numerical analysis.

• 한국의류학회지
• /
• 제32권2호
• /
• pp.167-178
• /
• 2008

Despite the fact that chogakpos are part of our wonderful Kyubang(the women's quarters in the Chosun Dynasty) culture with their own unique beauty and artistic values, there has been no scientific and objective proof of their aesthetic values. Once they are proved for their beauty through scientific analysis, they will be recognized worldwide along with our unique culture. The methodology included a review of related literature and theses along with magazines, periodicals, and Internet books. The analysis of lines parting, the dimensions of chogakpos were carried out over 108 pieces introduced in Old Pojagis by Heo Dong-hwa. As for line parting, the dimensions of chogakpos were measured to see if the golden and Geumgang ratio could be applied and to discover their unique partition ratio. As a result, there was the presence of the golden ratio applied to them with the golden curves from golden triangles and rectangles also found therein. The Yeoijumunbo confirmed that there was the golden ratio between the radius of a circle and a side of a regular decagon inscribed in the circle. The common line ratio among the squares, isosceles triangles, wanes, and overlapping rectangles was around 1:1.31, which means that there was a unique line ratio in the traditional chogakpos. Furthermore, the ratio of 1:1.31 was close to the Geumgang ratio commonly used in the traditional buildings of Korea.

• Restorative Dentistry and Endodontics
• /
• 제5권1호
• /
• pp.29-34
• /
• 1979

The purpose of this study was to measure thermal expansions of dental investments, Biovest(Casting Investment. Dentsply International INC, U.S.A.), Multi-Best (Use for all dental chrome-cobalt alloys, The Ransom & Randolph Co. U.S.A.), Kerr(Inlay Investment. Sybron Kerr, U.S.A.), O. K. (Inlay Investment. Shofu Dental MFG, Co. Japan), Whip-Mix (Cristobalite Inlay Investment. Whip-Mix Corporation. U.S.A.). Thermal expansion of specimens(5mm in diameter and 50mm in length) was measured by a dilatometer at the temperature range from $20^{\circ}C$ to $700^{\circ}C$ by comparing expansion between standardized quartz and experimental specimens with heating rate about $300^{\circ}C$/hr. The following results were obtained. 1. The coefficient of thermal expansion of Biovest was $15{\times}10^{-6}/^{\circ}C$ in the water powder ratio 18/100 and $14{\times}10^{-6}/^{\circ}C$ in the water powder ratio 28/100. Those of Multi-Best were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 14/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 24/100. 2. The coefficient of thermal expansion of Kerr were $17{\times}10^{-6}/^{\circ}C$ in the water powder ratio 38/100 and $14{\times}10^{-6}/^{\circ}c$ in the water powder ratio 48/100. Those of O. K. were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 33/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 43/100 3. The coefficient of thermal expansion of Whip-Mix were $14{\times}10^{-6}/^{\circ}C$ in the water powder ritio 40/100 and $12{\times}10^{-6}/^{\circ}c$ Fein the water powder ratio 50/100. Those of Hi-Heat were $11{\times}10^{-6}/^{\circ}c$ in the water powder ratio 28/100 and $10{\times}10^{-6}/^{\circ}c$ in the water powder ratio 38/100.

• The Korean Journal of Physiology
• /
• 제3권1호
• /
• pp.19-28
• /
• 1969

Skin temperatures on 10 sites and rectal temperature at every 10 minutes, oxygen consumption at every 20 minutes were measured on 18 male subjects (ages between 14 and 47 years) after exposure to cold air at $15^{\circ}C$ for two hours in a climatic room. Total body fat measured by means of a skinfold method and ratio of body surface area (S) to body volume (V), S/V, were utilized as basis of observations. Surface area was calculated after DuBois equation and body volume was calculated by our original formula. In influencing on the heat loss from the body core to the cold environment, % fat showed inverse relations, whereas, S/V ratio showed direct relations. Thus these two factors acted antagonistically on the body heat loss. Local skin temperatures showed negative correlations with skinfold thickness on the same site, nemaly, on chest, r=-.567; on back, r=-.507; and on upper arm, r=-.353. The other 7 skin sites showed low correlations with % fat. Minimum mean weighted skin temperature (MWST) showed a negative correlation (r=-.443) with % fat, and showed no correlation with S/V ratio. Oxygen consumption in the cold air at $15^{\circ}C$ increased from the first measurement at 20 minutes after exposure and maintained the same increasing trend up to 120 minutes. ${\Delta}T_R$ was greater in tile lean subjects who showed a greater % change in oxygen consumption. The antagonistic actions of % fat and S/V ratio on the heat loss were manifested by observations as follows: minimum rectal temperature was higher In fat subjects (r=.600) and lower in subjects with a greater S/V ratio (=-.582), ${\Delta}T_R$ was smaller in fat subjects (r=-.738) and greater in subjects with a greater S/V ratio (r=.618). Temperature difference between body core and skin surface (minimum rectal temperature minus minimum MWST) showed a positive correlation with % fat (r=.600) and a negative correlation with S/V ratio (r=-.881). Decrease in the mean body temperature and heat debt, respectively, showed negative correlations with % fat and positive correlations with S/V ratio.

• 지질공학
• /
• 제6권2호
• /
• pp.103-110
• /
• 1996

본 연구는 의성 소분지에 분포하는 백악기 사암과 셰일을 대상으로 압력에 따른 포아송비의 변화를 구명(究明)한 것이다. 역학적 시험을 실시하기 위하여, 직경 30.0Cm, 길이 6.2Cm인 시료를 사용하여 응력/변형률 시험을 하였다. 시험에 사용된 기기는 분해 능이 $10^{-7}$인 증폭기 및 16비트 A/D변환기,컴퓨터,하중 계측기,시험 운영 프로그램으로 구성되어 있으며, 유효자료 획득 속도는 매 초당 6~100개이다. 일반적으로 포아송비는 지금까지 하나의 물성으로 취급되어 왔으나, 본 시험 결과 금속류와는 달리 포아송비는 압력에 따라 변하는, 압력과 함수 관계에 있음이 확인되었다. 포아송비를 도출함에 있어서 4가지 방법을 사용한 결과, 계산에서는 포아송비가 급격하게 증가하여, 계산방법에 따라 파괴 영역이 확연히 구분되어 진다. 사암과 셰일은 낮은 하중과 높은 하중에서는 서로 다른 거동을 보였으나, 중간 하중 영역즉 탄성 한계 내에서는 ${\nu}_t={\nu}_0+P_{\sigma}$로(${\nu}_0$ : 탄성 영역 내에서의 초기 포아송비. ${\nu}_t$ : 탄성 영역 내에서의 포아송비, P : 포아송 계수, $\sigma$:응력)일차함수적으로 증가하였다. 2가지 암석 시료 모두 탄성 한계 내에서 포아송비는 0.1~0.21의 연속적인 변화 양상을 나타내며,파괴강도 65% 이사에서 급격히 증가하여 0.22~0.45로 나타나므로 이는 탄성 범위밖에 해당된다.