• Korean Journal of Environmental Biology
• /
• v.40 no.2
• /
• pp.125-137
• /
• 2022

To assess the characteristics of meiofaunal community fluctuations related to environmental factors, seasonal surveys were conducted in the subtidal zone of Hallyeohaesang National Park. The average depth of the study area was about 20 m, and the average water temperature at the bottom was low in winter(11.33℃) and high in summer(17.95℃). The sedimentary particles mainly comprised silt and clay at most stations. The abundance of meiofauna ranged from 81.7 to 1,296.5 Inds. 10 cm^-2, and the average abundance was 589.3 Inds. 10 cm^-2. The average abundance of meiofauna in each season was the lowest at 416.5 Inds. 10cm^-2 in winter and the highest at 704.5Inds.10 cm^-2 in spring. The dominant taxa were nematodes (about 92%) and harpacticoids (about 5%). In the cluster analysis of meiofaunal communities, they were divided into four significant groups. The largest group mainly contained spring and summer samples, and contained stations with a high nematode density of over 500 Inds. 10 cm^-2 and harpacticoids below 50 Inds. 10 cm^-2 with a high composition ratio of nematodes. In the cluster analysis, no regional division was found between the stations, and it was thought to be divided by the seasons with high abundance according to seasonal variation and the composition ratio of nematodes and harpacticoids. In the Spearman rank correlation analysis, the density of total meiofauna and the most dominant taxa, nematodes, was not significantly related to environmental factors. However, the density of harpacticoids had a significant positive correlation with water depth and a negative correlation with sediment particle size.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2007

The simple linear elastic-perfectly plastic model with soil parameters $s_u,\;E_u$ and n of undrained condition is usually applied to predict the displacement of a constructed diaphragm wall(DW) on soft soils during excavation. However, the application of this soil model for finite element analysis could not interpret the continued increment of the lateral displacement of the DW for the large and deep excavation area both during the elapsed time without activity of excavation and after finishing excavation. To study the characteristic behaviors of soil behind the DW during the periods without excavation, a series of tests on soft Bangkok clay samples are simulated in the same manner as stress condition of soil elements happening behind diaphragm wall by triaxial tests. Three kinds of triaxial tests are carried out in this research: $K_0$ consolidated undrained compression($CK_0U_C$) and $K_0$ consolidated drained/undrained unloading compression with periodic decrement of horizontal pressure($CK_0DUC$ and $CK_0UUC$). The study shows that the shear strength of series $CK_0DUC$ tests is equal to the residual strength of $CK_0UC$ tests. The Young's modulus determined at each decrement step of the horizontal pressure of soil specimen on $CK_0DUC$ tests decreases with increase in the deviator stress. In addition, the slope of Critical State Line of both $CK_0UC$ and $CK_0DUC$ tests is equal. Moreover, the axial and radial strain rates of each decrement of horizontal pressure step of $CK_0DUC$ tests are established with the function of time, a slope of critical state line and a ratio of deviator and mean effective stress. This study shows that the results of the unloading compression triaxial tests can be used to predict the diaphragm wall deflection during excavation.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.89-96
• /
• 2023

This study was conducted to apply with an air duct for the cooling and a utilizing cultivating method that uses the fruiting node and the defoliation to the high-temperature vertical and hydroponic cultivation of the oriental melon. The lower fruiting node (LF) was to remove all third vines generated from 5 nodes of a secondary vine. The higher fruiting node (HF) was fruiting on the third vine generated from a first node of the third vine. The direction of the stem string; upward (UW), downward (DW). Four treatment conditions were applied with the LF-UW, LF-DW, HF-UW (control), and HF-DW. The leaf age of melon leaves was measured for photosynthesis at 3 days intervals, and the fruit characteristic was conducted on 79 fruits in each treatment. The photosynthesis rate steadily increased after leaf development, reaching 20.8 μmol CO₂·m^-2·s^-1 on the 10 days, gradually increasing to 21.3 μmol CO₂·m^-2·s^-1 on the 19 days, and reaching 23.4 μmol CO₂·m^-2·s^-1 on the 32 days. After that, it lowered to 16.8 μmol CO₂·m^-2·s^-1 on the 38 days and dropped significantly to 7.6 μmol CO₂·m^-2·s^-1 on the 47 days. As a result of the fruit characteristics by fruiting nodes, the treatments of the fruit length was 12.6-13.4 cm, respectively, which was significant, and the fruit width was 7.9- 8.6 cm, respectively, was not significant. The soluble content ranged from 12.9 to 15.7°Brix, and the significance of all treatments, and higher than of LF-DW and HF-UW. The photosynthesis rate of melon leaves was good until 32 days after leaf development, but after that, the rate decreased. As for fruit quality, it was conformed that melons can be cultivated at the LF because the fruit enlargement and soluble content dose not decrease even when set at the LF. Results indicated that those can be used for LF and defoliation in the development of vertical and hydroponic cultivation method in high-temperature season.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.2
• /
• pp.90-96
• /
• 2023

The aim of this study was to investigate the effect of application rate of rice straw compost on soil chemical properties and soil organic carbon stock (SOC stock). The experiments were performed with no fertilizer (NF), inorganic fertilizer (NPK), NPK + rice straw compost 7.5 ton ha^-1 (NPKC7.5), NPK + rice straw compost 15 ton ha^-1 (NPKC15), NPK + rice straw compost 22.5 ton ha^-1 (NPKC22.5), and NPK + rice straw compost 30 ton ha^-1 (NPKC30). The SOC and SOC stock were highest in the NPKC30 treatment at 22.8 g kg^-1 and 71.2 Mg C ha^-1, respectively. Rice production was in the range of 621.2-654.4 kg 10a^-1 in NPKC22.5 and NPKC30 treatments, which was higher than that in the NPK treatment. However, with increase in compost application, the exchangeable K and Ca of the soil increased, and the exchangeable K and Ca were higher than the optimum range in NPKC22.5 and NPKC30 treatments. Excessive application of compost can have negative impacts on the environment, including nutrient accumulation in the soil and water pollution from nutrient runoff. Therefore, applying the standard amount of compost according to the agricultural environment would be appropriate, despite the relatively lower rice production and SOC stock than that observed with the application of 22.5 and 30 ton ha^-1.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.10-16
• /
• 2022

This study was conducted to examine the dry matter yield and weed control of alfalfa according to postemergence herbicides treatment during spring seeding alfalfa. The seeding time of alfalfa was April 21, 2021, the seeding amount was 20 kg/ha, and the seeding method was by 20 cm wide. The alfalfa harvest was carried out at the early bloom stage (10% of flowering), and the harvest date was June 29, 2021. The test treatments were non herbicide (NH), hand weeding (HW), herbicide 1 (Trifluralin, H1), herbicide 2 (S-metolachlor, H2), herbicide 3 (Alachlor, H3), and herbicide 4 (Pendimethalin, H4). Alfalfa plant height was significantly highest in H2 (62.1±1.4 cm) followed by H3 (61.7±1.6 cm), HW (58.5±1.0 cm), H1 (57.2±1.3 cm), H4 (56.1±1.3 cm), and NH (54.1±1.2 cm) (p<0.05). Based on HW, H2 and H3 were high and H1 and H4 were short, but NH was significantly shorter than HW and H1~H4 (p<0.05). The dry matter yield of alfalfa in NH, HW, H1, H2, H3, and H4 were 717.2±94.2, 2,613.8±254.1, 1,667.8±94.1, 2,498.3±120.2, 2,435.0±118.3, and 1,793.7±354.3 kg/ha. HW is the highest among them (p<0.05). The feed composition of alfalfa was 22~24% of the dry matter yield, and the CP content were significantly higher in NH (23.6 %) (p<0.05). The NH had higher (p<0.05) NDF and ADF, but RFV was lower (p<0.05). The weed plant height was NH 98.0±3.3cm, HW 73.3±1.7 cm, H1 91.9±1.5 cm, H2 53.3±5.8 cm, H3 81.4±3.5 cm and H4 96.6±2.2 cm, and H2 was significantly smallest in the group (p<0.05). The weed dry matter yield was NH 4,770.4±232.5 kg/ha, HW 316.3±91.9 kg/ha, H1 2,353.4±173.7 kg/ha, H2 114.5±10.2 kg/ha, H3 752.7±440.6 kg/ha and H4 2,220.6±775.6 kg/ha. The weed control value was HW 94.1%, H1 53.5%, H2 98.2%, H3 84.9%, H4 48.7%, the weed value of H2 is similar to weed control value of HW. Considering the above results, postemergence herbicide treatment controlled weeds by more than 50% compared with no treatment, and among herbicides, H2 (S-metolachlor) was found to be on a similar level to hand weeding.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.147-166
• /
• 2023

This study aimed to develop and apply guidelines for calculating greenhouse gas emissions to activate the contribution of the Korea Institute of Geoscience and Mineral Resources (KIGAM) for institutional-level research activities. In addition, we intended to improve awareness by identifying greenhouse gas emissions from KIGAM's basic research and development (R&D) activities in fiscal 2022. Herein, the research plan and budget contents of individual projects were analyzed, whilst the boundaries and scopes of greenhouse gas emissions were determined, with 22 cases being derived as either direct, indirect, or other sources of emissions. Subsequently, research activity emissions were calculated by emission source. The greenhouse gas emissions of KIGAM's 2022 basic project R&D activities were 2,041.506 tCO2eq, of which direct emissions were 793.235 tCO2eq (38.86%), indirect emissions comprised 305.647 tCO2eq (14.97%), whilst other emissions were 942.624 tCO2eq (46.18%). In particular, greenhouse gas emissions per 100 million won in the KIGAM's basic projects for fiscal 2022 (a total of 96.661 billion won) was calculated as 2.11 tCO2eq, whilst greenhouse gas emissions per participating researcher (was 4.800 tCO2eq. Such calculations should be carried out annually rather than once and accumulated for at least 5 years. Accordingly, it will be possible to standardize specific matters that influence emissions according to differences in research field characteristics and methods, thus guiding greenhouse gas emission reduction management in the future and evaluating the contributions of Environmental, Social and Governance (ESG) management to the environmental sector.

• Journal of agricultural medicine and community health
• /
• v.48 no.2
• /
• pp.132-143
• /
• 2023

Objectives: We aimed to describe the reporting patterns of 6 notifiable surveillance diseases in the Republic of Korea, including water- and foodborne infections, from 2012 to 2021. Methods: For the 12,296 cases that met the reporting criteria, we calculated the number of reported cases, including the number of cases confirmed by lab tests or suspected by a physician, the number of cases with delayed reporting and their average days of delay, and the median days required to report the confirmatory test results. Results: The overall number of reported cases consistently increased over the ten years, with a significant rise in the reported cases of typhoid fever, paratyphoid fever, and EHEC. Ninety-five percent of all reported cases were timely reported within one day of diagnosis. Vibrio vulnificus had the highest rate of delayed reporting (6.8% delayed over 1 day, 3.0% delayed over 3 days), while cholera had the lowest rate (1.9% delayed over 1 day, 0.1% delayed over 3 days). The average days of delayed reporting was 6.1 days: the highest for paratyphoid fever (10.8 days) and the lowest for cholera (2.7 days). For typhoid fever and paratyphoid fever, there has been an increase in the proportion of cases with negative test results. For vibrio vulnificus, there has been an increase in the proportion of cases with confirmed positive test results. As for EHEC, there has been a recent increase in cases with no confirmatory tests. Conclusions: Reported cases of water- and foodborne infectious diseases increased, indicating improved surveillance system completeness. However, for paratyphoid fever, improvements are needed in terms of timely notification by healthcare facilities and timely reporting of confirmatory test results.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.7 no.1
• /
• pp.11-16
• /
• 2006

Objectives : Transcranial Doppler (TCD) has been reported to be established as useful in detecting spasm after subarachnoid hemorrhage and to be probably useful in diagnosing stenosis or occlusion in intracranial arteries. In the detection of intracranial stenosis using TCD there have been reported some kinds of diagnostic criteria. This study was aimed to evaluate the accordance between TCD and magnetic resonance angiography (MRA) in detection of intracranial stenosis and to find out more accurate criteria for intracranial stenosis using TCD. Methods : Seventy-six stroke patients were evaluated by TCD and MRA. TCD criteria for middle cerebral artery (MCA) stenosis were used by 3 methods; ≥ 80cm/sec of mean velocity(Vm), ≥ 140 cm/sec of systolic velocity(Vs), and both. For stenosis of vertebral(VA) and basilar arteries(BA), the TCD criteria followed by 2 methods; ≥ 70 cm/sec of Vm and ≥ 100 cm/sec of Vs. The stenosis of intracranial artery in MRA followed by the interpretation of specialist in the department of radiology. The sensitivity, specificity, positive predictive value, negative predictive value, diagnostic accuracy and kappa agreement were calculated in each criteria of TCD compared with the result of MRA. Results : The sensitivity, specificity, positive predictive value, negative predictive value, diagnostic accuracy and kappa agreement using ≥ 80cm/sec of Vm for MCA stenosis were 55.6%, 81%, 34.5%, 91.0%, 77.1%, and 0.293, respectively. Using 140 cm/sec of Vs, those were 44.4%, 92.0%, 50.5%, 90.2%, 84.7%, 0.380, and using both criteria those were 44.4%, 95.0%, 61.5%, 90.5%, 87.3%, 0.445, respectively. Those using ≥ 70 cm/sec of Vm for VA and BA stenosis were 71.4%, 93.7%, 26.3%, 99.0%, 93.0%, 0.186 and using ≥ 100 cm/sec of Vs those were 71.4%, 97.3%, 45.5%, 99.1%, 96.5%, 0.539, respectively. Conclusion : These results suggested that for the diagnosis of MCA stenosis using TCD we should use the criteria of both ≥ 80cm/sec of Vm and 140 cm/sec of Vs, and for the VA and BA stenosis we adapt the criteria of ≥ 70 cm/sec of Vm.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.4
• /
• pp.81-96
• /
• 2020

Berthlot's reaction spectrophotometric method is generally used for the analysis of dissolved ammonium in seawater, but in recent years, a fluorescence method using an orthophthaldialdehyde-sulfite (OPA) fluorescent reagent is actively used internationally. In this study, we investigated the effects of the detection limit between the analysis methods, the reagent refractive index inherent in the spectrophotometric method, and the use of different calibration curves to understand the cause of the difference in dissolved ammonium concentration (about 0.31 𝜇M) observed in the seawater samples and a nutrient reference material between two institutions (KIOST (spectrophotometric method, one-order linear regression gradient only), Australia CSIRO (fluorescence method, quadratic formula)) conducted onboard the Australian R/V Investigator in 2017. The method detection limit (0.063 𝜇M) and the reagent refractive index background value (0.054 𝜇M) of the spectrophotometric method measured in this study could explain the difference in dissolved ammonium concentration values of the two institutes about 20% and 17%, respectively. However, when the concentration of the calibration curve of the spectrophotometric method was calculated using the same quadratic as the fluorescence method or the slope and intercept of linear regression, the difference in the dissolved ammonium concentration between the two institutions was reduced to less than the detection limit of the spectrophotometric method. Therefore, the difference in the concentration of dissolved ammonium between the two institutions, found in the nutrient reference materials and the seawater field sample during the international onboard nutrient inter-comparison experiment, may be attributed to be the effect of the different calibration curves used in the two methods rather than the effect of the difference in two analytical methods. When comparing the dissolved ammonium data from seawater samples in the future, it is recommended to pay attention to the information on the baseline, number of standard solutions, and calibration curve used in the analysis.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.170-175
• /
• 2023

In this study, the effect of MnSO₄ on the insecticidal crystal (IC) produced by Bacillus thuringiensis for a rapid detection medium was analyzed. The strains used included one B. thuringiensis reference (KCTC 1511) and nine wild-type strains. The IC in B. thuringiensis was detected following the method published by the Ministry of Food and Drug Safety in Korea. In the nutrient agar to which 0.005% MnSO₄ was added, IC was observed on two of the three plates after 48 hours of incubation and on all three plates after 120 hours. In AK agar, IC was observed on one and two of the three plates after 48 and 96 hours of incubation, respectively. These results indicated that 0.005% MnSO₄ nutrient agar is more appropriate than AK agar for production of IC in B. thuringiensis. The effect of various MnSO₄ concentrations on IC production was studied after 24 hours of incubation. IC was produced on 1 of the 10 plates with 0.000% MnSO₄ nutrient agar, 2 of the 10 plates with 0.001% MnSO₄ nutrient agar, and 3 of the 10 plates with 0.002% MnSO₄ nutrient agar. IC was not observed for the other nutrient agars containing 0.003%-0.009% MnSO₄. These results indicated that nutrient agar with 0.002% MnSO₄ led to the most rapid production of IC by B. thuringiensis after 24 hours of incubation. However, the conditions for IC production by B. thuringiensis depended on the incubation conditions and strain activity. Therefore, further studies are needed to verify the effects of 0.002% MnSO₄ on the production of IC by various Bacillus thuringiensis strains.