• Journal of the Korean Statistical Society
• /
• v.7 no.2
• /
• pp.95-98
• /
• 1978

This note deals with the estimations of the variance of a normal distribution $N(\theta,c\theta^2)$ where c, the square of coefficient of variation is assumed to be known. This amounts to the estimation of $\theta^2$. The minimum variance estimator among all unbiased estimators linear in $\bar{x}^2$ and $s^2$ where $\bar{x}$ and $s^2$ are the sample mean and variance, respectively, and the minimum risk estimator in the class of all estimators linear in $\bar{x}^2$ and $s^2$ are obtained. It is shown that the suggested estimators are BAN.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.1
• /
• pp.19-23
• /
• 1983

Potato virus Y (PVY) distribution, areas where the virus occurred, and incidence, Percentage of plants infected, on burley tobacco in Korea was surveyed in 1982. Most of the fields Investigated were infected with PVY. The virus incidence was 12.5%. District)union and incidence generally were sporadic, but Onyang, Hongseung and Iksan area virus incidence was higher than that of other areas. For strain identification, approximately 95% was nonnecrotic (PVY-VB) and 5olo necrotic strain (PVY-VN) .

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.91-95
• /
• 1990

Welding residual stress was measured by Barkhausen noise method. The calibration experiment was done for the quantitative analysis. The specimen for the calibration experiment must has the same thermo-mechanical history as the actual material to be tested. The Barkhausen noise were analysed by the pulse-height distribution. The results show that the distribution and magnitude of welding residual stress from Barkhausen noise method are in good agreement with those from blind hole method.

• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.4
• /
• pp.185-194
• /
• 2018

In this study, the extreme sloshing pressure was predicted using various statistical models: three-parameter Weibull distribution, generalized Pareto distribution, generalized extreme value distribution, and three-parameter log-logistic distribution. The estimation of sloshing impact pressure is important in design of liquid cargo tank in severe sea state. In order to get the extreme values of local impact pressures, a lot of model tests have been carried out and statistical analysis has been performed. Three-parameter Weibull distribution and generalized Pareto distribution are widely used as the statistical analysis method in sloshing phenomenon, but generalized extreme value distribution and three-parameter log-logistic distribution are added in this study. Additionally, statistical distributions are fitted to peak pressure data using three different parameter estimation methods. The data were obtained from a three-dimensional sloshing model text conducted at Seoul National University. The loading conditions were 20%, 50%, and 95% of tank height, and the analysis was performed based on the measured impact pressure on four significant panels with large sloshing impacts. These fittings were compared by observing probability of exceedance diagrams and probability plot correlation coefficient test for goodness-of-fit.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.505-517
• /
• 2005

The Purposes of this study were to find complementary connectible new factors that analyzed correlation relate of Sasang Constitution and GCM Body Type in Static Posture and Dynamic Hyper/Hypo-mobility Pattern. Method of this study was asymtomatic volunteers 232(unmarried man and women), conducted from September 1 to December 31. In this main study progressing step diagnosised first, Constitution of Sasang medicine after being classified into four groups of Soyangin, Taeumin, Soeumin, Taeyangin diagnosis of GCM Body Type and progressed that related Static Posture and Dynamic Hyper/Hypo mobility Pattern. The results are as follows. Distribution of Sasang Medicine Constitution proved to be Taeyangin 13, Soyangin 66, Taeumin 67, Soeumin 86 respectively. Distribution of GCM Body Type proved I Body Type 72(31.0%), II Body Type 54(23.3%), III Body Type 89(38.4%), IV Body Type 17(7.3%). The distribution of Sasang Constitution according to GCM Body Type was that; I Body Type was distributed in the order Soeumin 34.7%(25), Taeumin 31.9%(23), Soyangin 30.6%(22), Soeumin 34.7%(25) is the most people. II Body Type was distribution of in the order Soeumin 42.6%(23), Soyangin 5.9%(14), Taeumin 24.1%(13), Soeumin 42.6%(23) is the most people. III Body Type was distribution of in the order Soeumin 37.1%(33), Taeumin 30.3%(27), Soyangin 28.1%(25), Soeumin 37.1% is the most people. IV Body Type proved high distribution each of Soeumin 29.4%(5) and Soyangin 29.4%(5). In case of main left side posture character of spine and limbs about I Body Type 72 persons with left scapular and ilium forward tilted pattern proved in the order high distribution iliac crest thigh and scapular high 70(97.2%), gluteal fold high and scapular abduction 69(95.8%), lumbar scoliosis 65(90.3%). Also, in case of right side posture character proved in the order high distribution deep gluteal fold 69(95.8%), umbilical deviation 68(94.4%). Incase of main left side posture character of spine and limbs about n Body Type 54 persons proved in the: order high distribution knee hyperextension 50(92.6%), shoulder deviation 49(90.7%) etc. Also, in case of right side posture character proved in the order high distribution pelvic deviation 53(98.1%), iliac crest thigh 52(96.3%), hip flexion and ankle inversion 51(94.4%) etc. In case of main left side posture character of spine and limbs about III Body Type 89 persons proved in the order high distribution shoulder deviation 87(97.8%), scapular abduction 86(96.6%), scapular high 85(95.5%) etc. And in case of right side posture character proved in the order high distribution pelvic deviation and iliac crest thigh 86(96.6%) etc. In case of main left side posture character of spine and limbs about IV Body Type 17 persons proved in the order high distribution pelvic deviation, lumbar sciliosis and lumbar lordosis increase 15(88.2%) etc. Also, in case of right side posture character proved in the order high distribution wrist dorsiflexion 16(94.1%), thickened achilles tendon etc.

• IMMUNE NETWORK
• /
• v.3 no.2
• /
• pp.145-149
• /
• 2003

Background: Apoptosis has been implicated in pathogenesis of various disease. Apo-1/Fas (CD95) is one of the main pathway of apoptosis. To examine the possible relationship between Apo-1/Fas (CD95) and primary knee osteoarthritis, MvaI restriction length polymorphism (RFLP) in human Apo-1/Fas (CD95) gene was assessed. Methods: Genotype and allele frequencies in promoter region in the Apo-1/Fas (CD95) gene were studied by PCR-RFLP in 226 Korean controls and 148 Korean patients with primary knee osteoarthritis. Results: No statistically significant difference in the genotypic distribution and allelic frequencies was found between the control and the knee oateoarthritis patients. But in the severe grade (grade 3, 4) Kellgren-Lawrence score patients, the frequency of $MvaI^*1$ (G) allele was significantly decreased (P=0.0392) and the of $MvaI^*2$ (A) allele frequency was significantly increased (P=0.0473) compared to the normal controls. Conclusion: Apo-1/Fas (CD95) gene polymorphism is a part a determinant factor of severity in knee osteoarthritis, the patients with $MvaI^*2$ (A) allele is more severe radiologic progression. Further substantiation studies are needed in larger patient samples and various other apoptosis related genes to elucidate the mechanism of osteoarthritis, including the Fas ligand gene analysis.

• Communications for Statistical Applications and Methods
• /
• v.27 no.1
• /
• pp.47-64
• /
• 2020

In this paper, we derive some estimators of the scale parameter of the exponentiated half-logistic distribution based on the multiply Type-I hybrid censoring scheme. We assume that the shape parameter λ is known. We obtain the maximum likelihood estimator of the scale parameter σ. The scale parameter is estimated by approximating the given likelihood function using two different Taylor series expansions since the likelihood equation is not explicitly solved. We also obtain Bayes estimators using prior distribution. To obtain the Bayes estimators, we use the squared error loss function and general entropy loss function (shape parameter q = -0.5, 1.0). We also derive interval estimation such as the asymptotic confidence interval, the credible interval, and the highest posterior density interval. Finally, we compare the proposed estimators in the sense of the mean squared error through Monte Carlo simulation. The average length of 95% intervals and the corresponding coverage probability are also obtained.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.92-95
• /
• 1990

It is important to analize voltage drop exactly in distribution systems. However the average length of a feeder is about to 40 km long and the exact modelling of a sectional share is very difficult. An efficient simplified model is necessary for dealing with such a long and complicated feeders. Especially, distribution feeders are linked to customers directly and maintaining the end voltages within the regulation is very important. This paper introduces distribution load factor for simplifing the complicated feeders in a proper manner. Test results show the more enhancement of accuracy and the better applicability in field sense.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001).

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001)