• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.152-153
• /
• 2012

While engine room arranging pipe which is used from the vessel, It measured the internal flow of 90 degree elbow which is used from the main condenser. Fluid flow in elbow of 90 degree is measured by PIV and Dewetron system. The Reynolds number adopts 50000 and experimental study of flow field in the elbow.

• 국제물리치료학회지
• /
• 제1권2호
• /
• pp.113-119
• /
• 2010

The purpose of this study was to determine the difference of the pinch strength according to testing posture(standing and sitting) and elbow flexion degree($0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$). Forty normal young adults(male: 20, female: 20, mean age: $22.68{\pm}2.91$ years) participated in this study. The methods of this study were categorized as follows: 1) One set of measurement was performed on four elbow flexion degrees($0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$) in two testing postures(standing and sitting) and all subjects were measured for 3 sets testing procedures in every experimental sessions. 2) Pinch strength in various elbow flexion degree was measured after 2 min rest time, and then each test set was repeatedly performed with 5 min rest time to prevent fatigue of muscles involved in the elbow joint. The result was obtained as follow: 1) In standing posture, there was statistically significant difference at $0^{\circ}$ and $45^{\circ}$, $0^{\circ}$ and $90^{\circ}$, $0^{\circ}$ and $135^{\circ}$, $45^{\circ}$ and $90^{\circ}$, $45^{\circ}$ and $135^{\circ}$, $90^{\circ}$ and $135^{\circ}$. 2) In sitting posture, there was statistically significant difference at $0^{\circ}$ and $45^{\circ}$, $0^{\circ}$ and $90^{\circ}$, $0^{\circ}$ and $135^{\circ}$, $45^{\circ}$ and $90^{\circ}$, $45^{\circ}$ and $135^{\circ}$, $90^{\circ}$ and $135^{\circ}$. 3) Statistically, there was no significant difference between standing and sitting posture in same elbow flexion degree, however pinch strength in standing posture was higher than sitting posture.

• 대한정형도수물리치료학회지
• /
• 제14권2호
• /
• pp.25-33
• /
• 2008

Purpose : This study was investigated the effect on grasp and pinch strength according to degree of flexion in elbow joint. Methods : Thirty male and thirty female students, aged 20 to 31 years were tested for using opened positioning with their shoulder abduction at $55^{\circ}$ and shoulder horizontal adduction at $30^{\circ}$ in four elbow flexion($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$). An electronic dynamometer(E-LINK V900s Evaluation System)and goniometer were used to measure grasp and pinch strength. Results : The average grasp strength of the dominant hand was strongest at elbow $45^{\circ}$ however, weakest at elbow $135^{\circ}$ flexion in both of male and female. The average pinch strength of the dominant hand was strongest at elbow $135^{\circ}$ flexion in both of male and female. The average pinch strength of dominant hand was weakest at elbow $45^{\circ}$ flexion in both of male and female. According to degree of elbow flexion in both of male and female, grasp and pinch strength was no significant statistically. In analyzing correlations, the grasp strength of male showed the most significant difference at elbow $45^{\circ}$ & $90^{\circ}$ flexion, and the pinch strength was most significant difference at elbow $0^{\circ}$ & $45^{\circ}$ flexion. Conclusion : In analyzing correlations, the grasp strength of female showed the most significant difference at elbow $90^{\circ}$ & $135^{\circ}$ flexion, and the pinch strength was most significant difference at elbow $45^{\circ}$ & $90^{\circ}$ flexion.

• 대한물리의학회지
• /
• 제4권4호
• /
• pp.275-280
• /
• 2009

Purpose：We have investigated to analysis biomechanics for pinch strength due to elbow flexion degree. Methods：Pinch strength was measured by Electro Dynamometer(G-100) using four elbow flexion degree ($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$). Results：In experimental results, we found that pinch strengths were 5.4kg($0^{\circ}$), 4.8kg($45^{\circ}$), 5.6kg($90^{\circ}$) and 5.2kg($135^{\circ}$), respectively. The Pinch strengths got maximum at $90^{\circ}$ degree, minimum at $45^{\circ}$ degree. We have calculated F1 values using $\sum$T=0. As a result F1 values were 540N($0^{\circ}$), 480N($45^{\circ}$), 560N($90^{\circ}$) and 520N($135^{\circ}$), respectively. F1 values got maximum at $90^{\circ}$ degree, minimum at $45^{\circ}$ degree. Data curve line of $F_1$ values was increased in 45~90 section and decreased in 0~45, 90~135 sections, respectively. Conclusion：$F_1$ (Flexor digitorum superficialis and profundus) values were 10 times bigger than pinch strengths. Data curve line of $F_1$ values was similar to active length-tension curve in 45~90, 90~135 sections.

• The Journal of Korean Physical Therapy
• /
• 제7권1호
• /
• pp.43-49
• /
• 1995

The purpose of this study were to determine the effect of testing posture and elbow position on grip strength. Two hundred college students 100 males and 100 females aged 18 to 28 years, participated in the study. A Grip-Strength Dynamometer was used to measure the grip strength in two testing posture(sitting and standin) and four elbow position$(0^{\circ},\;45^{\circ},\;90^{\circ}\;and\;135^{\circ}\;flexion)$ correlations and t-test was used to determine any significant difference in grip strength between the testing posture and the elbow position. The results were as follows : 1. The grip strength was affected by testing pasture and flexion degree of elbow. 2. The grip strength was stronger in the standing than sitting in subjects 3. The grip strength decreased according to elbow flexion increase in subjects. 4. The higher grip strength gained in the standing with the elbow 0 flexion. 5. The grip strength by elbow flexion degree showed significant difference at sitting and standing posture. The grip strength was significant differenced by testing position at same elbow flexion degree.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.76-85
• /
• 2017

Wall pressure measurements and flow visualization were conducted for a 90 degree elbow with an axis curvature radius the same as its inner diameter (125 mm). Reynolds numbers 320,000 and 500,000, based on the inner diameter and bulk velocity, were examined. A deflected inflow, having an almost constant velocity slope and a faster velocity at the inside, was introduced. Ensemble averaged pressure distributions showed that no difference of normalized pressure could be found in both the Reynolds number cases. Power spectral density functions of pressures exhibited that the fluctuation having the Strouhal number (based on the inner diameter and bulk velocity) of 0.6 existed in the downstream region of the elbow, which was 0.1 larger than that of the uniform inflow case [1]. Results of numerical calculations qualitatively coincided with the experimental ones.

• 대한물리의학회지
• /
• 제4권4호
• /
• pp.209-214
• /
• 2009

Purpose：The purpose of this study are analysis characteristic of grasping power with each different elbow flexion degree and grasping power with each different elbow each different hand position and announcement. Methods：Measuring about 10cm wide open position with both feet for each elbow in the line positions of the $0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$, and forearm position of supination, mid position, pronation is of the order. Results：The averge position of maximal grip strength was $0^{\circ}$ of elbow flexion with mid position in male and $90^{\circ}$ of elbow flexion with mid position in female. Grip strength in change of wrist position according to elbow flexion was significant difference(P<0.05). Grip strength in change of wrist position according to elbow flexion by sex was significant difference(P<0.05) Conclusion：When the elbow has flexion with $0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$ then grasping power has a intimate relation with forearm position. Grasping power with forearm supination, pronation and mid position also has a intimate relation with elbow flexion.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.55-61
• /
• 2005

The purpose of this study is to investigate the effect of circumferential location of local wall thinning defect on the collapse behavior of an elbow. Thus, the present study conducts three-dimensional finite element analysis on the 90-degree elbow containing a local wall thinning at intrados, crown and extrados of bend region and evaluates the collapse moment of wall thinned elbow under various thinning shapes and loading conditions. Combined internal pressure and bending moment are considered as an applied load. The internal pressure of $0\~20MPa$ and both closing and opening mode bending are employed. The results of analysis show that the reduction in collapse moment of the elbow by local wall thinning is more significant for a defect locating at crown than for a defect locating at intrados or at extrados. Also, the effect of internal pressure on the collapse moment of wall thinned elbow depends on the circumferential location of thinning defect and applied bending mode.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.357-360
• /
• 2002

The effect of distance between ninety degree elbow close to upstream face of orifice plate and orifice plate on discharge coefficient was investigated. The distributions of discharge coefficient and differential pressure caused by elbow and short upstream straight length were examined and modified discharge coefficient was introduced. The results presented in this study could be useful when orifice plate is installed under the condition of simple flow disturbance element and short upstream straight length.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.1017-1024
• /
• 2007

This study performed a series of burst tests at ambient temperature using real-scale elbow specimen containing a local wall-thinning defect at it's intrados or extrados and evaluated failure pressure of locally wall-thinned elbows. In the experiment, a 90-degree 100A, Sch. 80 standard elbow was employed, and various wall-thinning geometries, such as length, depth, and circumferential angle, were considered. From the results of experiment, the dependences of failure pressure of wall-thinned elbows on the defect geometries and locations were investigated. In addition, the reliability of existing models was examined by comparing the tests data with the results predicted from existing failure pressure evaluation models for locally wall-thinned elbow.