• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.35-42
• /
• 2005

Few studies have been carried out to find out the interaction of design speeds, operating speeds, and posted speeds though they have a complementary relationships. As an attempt to find the relationships, this study measured the speeds of the free flowing vehicles at four lane rural highways. In comparison of 95th percentile speeds and inferred design speeds determined from the road design manual with the geometric features of each sites, operating speeds were constantly higher than the inferred design speeds at the sites where the inferred design speed is under 110km/h. and the reverse situation was observed at the sites where the inferred design speed is over 130km/h. In the comparison of operating speeds and posted speeds. the range of the 85th percentile speeds at the sites where posted speeds is 80km/h was distributed from 95km/h to 110km/h. and the range was distributed from the 105km/h to the 120km/h at the sites where posted speeds is 90km/h. Multiple regression analysis was used to develop prediction equations for mean. 85th. and 95th percentile speeds at approach and curve midpoint locations. At the midpoint, only posted speeds influenced the mean, 85th. At the approach locations, the mean, 85th, 95th percentile speeds were influenced by posted speeds and length of the approach tangent.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.95-105
• /
• 2002

Under a specific roadway alignment condition by design-speed standards, safety of the roadway is determined by an actual operating speed of a driver. This research takes first lanes of four-lane(hi-direction) rural highways as target facility. It also takes the straight and curved lanes of the selected highways for in-depth study. This study used NC-97 to detect speeds of passenger cars whose speeds are not affected by front vehicles. This research analyzed properties of 85th percentile operating speed at upstream of horizontal and through curves under various alignment conditions. The results show that 53∼65 Percent of drivers drive faster than the posted speed-limit (80KPH) by 14∼20 KPH on average. It also shows that the 85th-percentile operating speeds are the lowest at the middle point of curve length when curve radius is smaller. However, they are lowest at 1/4 point of curve length when curve radius is greater. Along roadways where curve radius is small, difference between upstream speed and the speed along the curve is considerably large. On the other hand. the speed difference is setting smaller as the curve radius is increasing. According to the results, significant variables affecting the 85th percentile operating speeds are curve radius and the 85th-Percentile operating speeds of upstream curves.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.7-19
• /
• 2007

The purpose of posted speeds is to provide a speed that ensures the safety of vehicle flow according to given road situations. Because of this, posted speeds must be carefully examined, and posted speeds at freeway exits and entrances in particular should consider car characteristics. Posted speeds at freeway exits and entrances must take changing speeds due to curve radiuses into consideration and in this study, an 85th percentile speed becomes the most important element to consider. When it is considered that most traffic accidents occur because of variations in speed between cars, posted speeds should be set after considering car traveling characteristics. Within these dimensions, instead of putting significance on an upper direction regulation or lower direction regulation, speed distributions which fit to the characteristics of each road should be fully considered. Accordingly, this study evaluated appropriate posted speeds that will reduce the dangers of traffic accidents through posted speed regulations of roads now in operation by offering a posted speed setting method theory, using entries at Yangji, Yongin, and Cheongwon interchanges as subjects.

• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.67-76
• /
• 1998

본 연구는 현행 오르막차로 설계기준이 적정한지를 검증하고 오르막차로 설계기준 제시에 목적을 두고 있다. 오르막차로와 본선에 대한 현장의 속도분포와 화물차량의 합류형태를 바탕으로 오르막차로 설계기준을 검증하고 개발하였으며, 주요 연구결과를 요약하면 다음과 같다. 첫째, 설계속도 120km/h에서 화물차의 50백분위비율과 85백분율은 각각 66km/h와 76km/h로 나타났기 때문에 현행 설계속도 80km/h 이상의 구간에서 화물차의 허용최저속도를 60km/h로 규정하고 있는 것을 설계속도 기준을 세분화하여 설계속도가 100km/h 이상인 구간에서는 화물차의 허용최저 속도를 70km/h로 함이 타당한 것으로 도출되었다. 둘째, 설계속도 80km/h인 구간에서의 화물차 허용최저속도는 60km/h로 규정한 것이 적정하다고 확인되었다. 셋째, 설계속도 80km/h 미만의 구간에서 화물차의 허용최저속도는 설계속도에서 20km/h를 감한값을 사용하는데, 이 때 20km/h 감속을 한계속도 기준으로 사용하는 것이 적정하다고 확인되었다.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.131-139
• /
• 2002

This study introduces a developed artificial neural networks(ANN) model as a more efficient and reliable prediction model in operating speed Prediction with the 85th percentile horizontal curve of two-way rural highway in the aspect of evaluating highway design consistency. On the assumption that the speed is decided by highway geometry features, total 30 survey sites were selected. Data include currie radius, curve length, intersection angle, sight distance, lane width, and lane of those sites and were used as input layer data of the ANN. The optimized model structure was drawn by number of unit of hidden layer, learning coefficient, momentum coefficient, and change in learning frequency in multi-layer a ANN model. To verify learning Performance of ANN, 30 survey sites were selected while data in obtained from the 20 cites were used as learning data and those from the remaining 10 sites were used as predictive data. As a result of statistical verification, the model D of 4 types of ANN was evaluated as the most similar model to the actual operating speed value: R2 was 85% and %RMSE was 0.0204.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.149-161
• /
• 2022

Because the speed limit affects moving speed, it is closely related to traffic accidents as well as traffic flow. The existing speed limit calculation methods consider various engineering factors such as lanes, intersection spacing, driveways, crosswalks, 85 percentile speed, land uses, and roadway geometric characteristics etc. However, it can be said that the engineering analysis is insufficient because the traffic impact analysis considering traffic volume is not carried out. In addition, only 85 percentile speed, which is the spot speed, does not reflect the characteristics of the traffic flow on the road. In this paper, the effect of the speed limit change on the moving speed and the travel speed was analyzed in detail accordinr to the variation of intersection spacing and traffic volume. And by using the results, we proposed a speed limit calculation method that maintains the same service level as before the speed limit change, thereby increasing the speed improvement effect and reducing the difference between moving speed and travel speed. In addition, a variable speed limit operation method according to the change in traffic volume was also suggested. This method is expected to be effective in terms of safety by reducing the speed difference, which affects the severity of traffic accidents, while securing the speed improvement effect, and increasing the speed limit compliance rate of drivers by operating the speed limit that reflects the speed change due to the variation of traffic volume.

• Clinical and Experimental Pediatrics
• /
• v.51 no.12
• /
• pp.1329-1335
• /
• 2008

Purpose : This study aimed to determine the best cutoff line for insulin-like growth factor (IGF)-I and insulin-like growth factor binding protein (IGFBP)-3 to discriminate between growth hormone deficiency (GHD) patients and the control group. Methods : Two hundred thirty subjects with normal controls (129 boys and 101 girls, aged 7-15 years), 14 patients with complete GHD (12 boys and 2 girls), and 17 patients with partial GHD (9 boys and 8 girls) were studied. IGF-I serum concentrations were measured by radioimmunoassay (RI), and IGFBP-3 concentrations were measured by immunoradiometric assay (IRMA). Results : The receiver operating characteristic (ROC) plot analysis showed that the best IGF-I and IGFBP-3 cutoff line was at -1 standard deviation (SD). By comparing IGF-I serum levels of GHD children within 1 SD of normal control, we determined the sensitivity (S) (87.5-100%) and specificity (Sp) (80-84.6%) according to the age group. For IGFBP-3, we determined the following values: S (58.7-85.7%) and Sp (79.2-85.5%). Eleven of 14 patients with complete GHD (78.5%) and 16 of 17 patients with partial GHD (94.1%) had IGF-I concentrations equal to or below -1 SD of the control group mean. Ten of 12 complete GHD children (83.3%) and 13 of 17 partial GHD children (76.5%) had IGFBP-3 concentrations equal or below -1 SD of the control group mean. Conclusion : We conclude that the measurement of IGF-I and IGFBP-3 concentrations might provide essential supplementary data in the diagnostic evaluation of patients with GHD. Our results support the need to use cutoff lines based on below -1 SD of the control.