• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.509-520
• /
• 2007

In this paper, we propose a real-time sensor node platform that guarantees the real-time scheduling of periodic and aperiodic tasks through a multitask-based software decomposition technique. Since existing sensor networking operation systems available in literature are not capable of supporting the real-time scheduling of periodic and aperiodic tasks, the preemption of aperiodic task with high priority can block periodic tasks, and so periodic tasks are likely to miss their deadlines. This paper presents a comprehensive evaluation of how to structure periodic or aperiodic task decomposition in real-time sensor-networking platforms as regard to guaranteeing the deadlines of all the periodic tasks and aiming to providing aperiodic tasks with average good response time. A case study based on real system experiments is conducted to illustrate the application and efficiency of the multitask-based dynamic component execution environment in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. It shows that our periodic and aperiodic task decomposition technique yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1811-1815
• /
• 2014

Background: In clinical trials with no upper age limit, the proportion of older patients is usually small, probably reflecting the more conservative approach adopted by clinicians when treating the elderly. An exploratory analysis of elderly patients in the RECORD-1 Trial showed that patients ${\geq}$ 65 y.o. had superior median PFS than overall RECORD-1 population (5.4 months and 4.9 months, respectively). We investigated the efficacy, relative benefit and safety of Everolimus (EVE) as sequential therapy after failure of VEGFr-TKI therapy for older patients with metastatic renal cell cancer (mRCC), in daily practice. Materials and Methods: 172 consecutive IRB approved patients with mRCC (median age 65, M:F 135/37, 78% clear cell) who received salvage EVE at 39 tertiary institutions between October 2009 and August 2011 were included in this analysis. Some 31% had progressed on sunitinib, 22% on sorafenib, 1% on axitinib, 41% on sequential therapy, and 5% had received other therapy. Patients with brain metastases were not included and 95% of the patients had a ECOG (Eastern Cooperative Oncology Group) performance status (PS) of 0 or 1. Previous radiotherapy was an exclusion criterion, but prior chemotherapy was permitted. Adequate organ function and hematologic parameters were mandatory. EVE administration was approved by the institutional review board at each participating institution and signed informed consent was obtained from all patients. Results: Median time of the whole cohort to last follow-up was 3.5 months (range 0.4-15.2 months). Forty four percent were continuing to take EVE at last followup. There were 86 (50%) patients ${\geq}$ 65 y.o. and 86 (50%) <65 y.o. The percentage of patients who showed PR/SD was higher in the older group than in the younger one (5.9%/61.2% vs 1.2%/46.5%, respectively). Median survival of older patients was also significantly longer (3.5 +/- 0.31 vs 3.1 +/- 0.34, hazard ratio=0.45, CI; 0.255-0.802). Analysis using Cox regression model adjusted for gender, PS, number of metastases, site of metastases, histology, smoking history and age detected an association between age and PFS (p=0.011). The frequency of adverse events in elderly patients treated with EVE was no greater than that in younger patients, although such toxicity may have had a greater impact on their quality of life. Conclusions: Older patients should not generally be excluded from accepted therapies (mTOR inhibitors after failure of VEGFr-TKI therapy) for mRCC.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.274-280
• /
• 2011

Due to their rapid growth and new paradigm applications, wireless sensor networks(WSNs) are morphing into low power personal area networks(LoWPANs), which are envisioned to grow radically. The fragmentation and reassembly of IP data packet is one of the most important function in the 6LoWPAN based communication between Internet and wireless sensor network. However, since the 6LoWPAN data unit size is 102 byte for IPv6 MTU size is 1200 byte, it increases the number of fragmentation and reassembly. In order to reduce the number of fragmentation and reassembly, this paper presents a new scheme that can be applicable to 6LoWPAN. When a fragmented packet header is constructed, we can have more space for data. This is because we use 8-bits routing table ill instead of 16-bits or 54-bits MAC address to decide the destination node. Analysis shows that our design has roughly 7% or 22% less transmission number of fragmented packets, depending on MAC address size(16-bits or 54-bits), compared with the previously proposed scheme in RFC4944. The reduced fragmented packet transmission means a low power consumption since the packet transmission is the very high power function in wireless sensor networks. Therefore the presented fragmented transmission scheme is well suited for low-power wireless sensor networks.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.793-802
• /
• 1998

Salmonellosis caused by a number of serotypes of Salmonella is an infectious, acute or chronic, zoonotic disease and characterized by enteritis and diarrhea, septicemia in animal. In these studies we investigated the prevalent serotypes of Salmonella causing animal salmonellosis in Korea and the 71 strains of Salmonella spp. were isolated from materials such as mesenteric lymph nodes, fecal samples from slaughtered animal. With the identification test results, the most prevalent serotypes were, in order, S stanley 31 strains (43.7%), S typhimurium 19 strains (26.8%) and S montevideo 11 strains (15.5%), respectively. And we could establish the method for detection of antibodies to broad variety of Salmonella serotypes. Lipopolysaccharide(LPS) antigen extracted from Salmonella was more sensitive and specific than outer membrane protein antigen from that for detection of Salmonella antibody by using an indirect ELISA. The optimal concentration of antigen was 100ng/ml of LPS, the dilutions of conjugate and serum were 1 : 1,000~2,000 and 1 : 200~400, respectively. The mix LPS-ELISA which was used by mixing LPS from S typhimurium (group B), S choleraesuis (group C) and S enteritidis (group D) were more rapid and effective than that used LPS from individual strain for detection of Salmonella serogroup O4, O7 and O9 antibody at the same time. We could obtain the high values of optical density ($0.73{\pm}0.32$) by mix LPS-ELISA on the farm which had occurred salmonellosis, but very low values of $0.17{\pm}0.06$ on the negative farm of salmonellosis. So, the mix LPS-ELISA may be used to monitor the serological surveillance for the presence of infection with a number of serotypes of Salmonella and would be useful for prevention and control of salmonellosis in animal.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.798-802
• /
• 2011

Purpose: A wart is caused by epidermal infection with the human papilloma virus. Although wart naturally disappears in some cases, it require treatment because of pain, aesthetic problem, and the possibility of malignant change. Conventional non-surgical treatment cannot be a fundamental solution for the pain and has such disadvantages as frequent recurrence and difficulties in achieving a satisfactory outcome. A surgical procedure was performed on patients with wart and the procedure had a good outcome. Methods: We investigated the gender, age, lesion site, mean treatment duration, and presence or absence of recurrence in 21 patients with a wart within the period of January 2007 to July 2011. For local lesions, primary closure, including subcuticular suture after the excision, was performed. If the defect size was too big to do primary closure, we performed rotation flap. For wide multiple lesions, a split thickness skin graft was performed. Results: Among the 21 patients, 12 patients were male and 9 patients were female, and their mean age was 42 years (SD=17.38, range: 11~75 years). The lesion site was the foot in 10 patients, the hand in 8 patients, the face in 2 patients, and the scalp in 1 patient. The mean treatment duration was 13.5 days (SD=4.36, range: 6~15 days) for the primary closure or rotation flap, and 18.5 days (SD=2.12, range: 17~20 days) for the skin graft. 20 patients were cured without recurrence. No recurrence was observed in the patients who underwent primary closure or rotation flap. One of the two patients who underwent a skin graft of their wart that had covered their entire palm had local recurrence in part of her finger tips. Conclusion: We performed surgical procedure on recalcitrant wart. As a results, we can treat it with short treatment duration, low recurrence rate and less scarring and get high patient satisfaction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.143-149
• /
• 2016

Recent accidents caused by toxic chemicals and the social problems caused by frequent. As of 2010, there are more than 100,000 types of deadly toxic chemicals being distributed throughout Korea, and severely intoxicated patients along with an enormous number of patients can be induced at the time of an accident involving deadly toxic chemicals. Internationally, the seriousness of large-scale disasters due to a NBC disaster (nuclear, biologic and chemical disaster) is being highlighted as well. So, we obtain the information of the RFID tag attached to a glass bottle with containing the toxic chemical to transfer the data to the smart device has been studied a system that can monitor the status of the toxic chemical in real time. The proposed system is the information was sent to the main system using a zigbee communication by recognizing the tag vial containing the toxic chemical with the 13.56MHz bandwidths good permeability. User may check the information in real time by utilizing the smart device. However, the error of the system for managing the toxic chemical generates a result that can not be predicted. Failure of the system was detecting the error by using a comparator as this can cause an error. And the detected error proposed a duplex system so that they do not affect the overall system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.796-802
• /
• 1995

Oyijangachi, a traditional Korean brinded cucumber, was prepared by brinning the cucumbers in five different solutions for 48 hrs and then, was dipped into dipping sources(Kochujang, Doenjang and Ganjang) for 30 days of aging. Firmness, calcium content and enzyme activities(pectinesterase and polygalacturonase) changes were measured among the cucumbers which were treated by five different solutions during aging. The firmness of Kochujang Oyijangachi were the lowest after 10 days of aging for all from the five brining solutions because of "hollow phenomena" of cucumbers. Calcium contents of cucumbers after dipping into the five solutiosn increased as calcium content of the solutions increased and also increased when the cucumbers dipped into the dipping bases(Kochujang, Doenjang and Ganjang) because of calcium migration from the dipping sources into the cucumbers during aging. The calcium contents of the three dipping bases were ranged from 70mg% to 120mg% of Ca. The activity of polygalacturonase in the Oyijangachi decreased generally during aging and decreased rapidly during initial 5 days of aging. The activity of pectinesterase of cucumbers treated with 12% salts solutions(treatment 3, 4 and 5) were higher than those of cucumbers treated with 6% salts solutions(treatment 1 and 2).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.422-429
• /
• 2007

Location awareness is one of the key functionalities to build an U-city. Recently, many of works of the location-aware systems are emerging to commercially apply to on-going large-scale apartment complex based on U-city. As dwellers or cars being attached with active tags are moving in the U-city complex, the active tags periodically broadcast their own identifiers and receivers fixed along the street or in building use those information to calculate location of them. There are several issues to be considered for such an environment. The first is that the number of active tags operating in the same region are large as much as tens of thousands, and the second is that the active tags should be alive without change of batteries more than a year, hence low power consumption is very important. In this paper we propose i) a new architecture for location-aware system considering such issues, ii) technical issues to implement it using active tags, and iii) a mathematical analytic model to investigate overall performance and verify it by comparing with actual experimental results. Through the analysis we can show the theoretical boundary of the lowest packet loss rate and the maximum number of tags with acceptable performance for the systems based on active tags. The results can be applied to practical design of location-based systems of U-City projects.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.84-94
• /
• 2006

In this paper, we propose the algorithm to reduce guard time of UWB MAC time slot for throughput gain. In the proposed draft by multiband ofdm alliance (MBOA), Guard time of each medium access slot (MAS) is composed of shortest inter-frame space (SIFS) and MaxDrift which is the time caused by maximum frequency offset among devices. In this paper, to reduceguard time means that we nearly eliminate MaxDrift term from guard time. Each device of a piconet computes relative frequency offset from the device initiating piconet using periodically consecutive transferred beacon frames. Each device add or subtract the calculated relative frequency offset to the estimated each MAS starting point in order to synchronize with calculated MAS starting point of the device initiating piconet. According to verification of simulations, if the frequency offset estimator is implemented with 8 decimal bit, the ratio of the wasted time to Superframe is always less than 0.0001.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.552-558
• /
• 2014

This paper suggests how to design a ZigBee-chip-based communication module to remotely measure radiation level. The suggested communication module consists of two control processors for the chip as generally required to configure a ZigBee system, and one chip module to configure a ZigBee RF device. The ZigBee-chip-based communication module for remote radiation measurement consists of a wireless communication controller; sensor and high-voltage generator; charger and power supply circuit; wired communication part; and RF circuit and antenna. The wireless communication controller is to control wireless communication for ZigBee and to measure radiation level remotely. The sensor and high-voltage generator generates 500 V in two consecutive series to amplify and filter pulses of radiation detected by G-M Tube. The charger and power supply circuit part is to charge lithium-ion battery and supply power to one-chip processors. The wired communication part serves as a RS-485/422 interface to enable USB interface and wired remote communication for interfacing with PC and debugging. RF circuit and antenna applies an RLC passive component for chip antenna to configure BALUN and antenna impedance matching circuit, allowing wireless communication. After configuring the ZigBee-chip-based communication module, tests were conducted to measure radiation level remotely: data were successfully transmitted in 10-meter and 100-meter distances, measuring radiation level in a remote condition. The communication module allows an environment where radiation level can be remotely measured in an economically beneficial way as it not only consumes less electricity but also costs less. By securing linearity of a radiation measuring device and by minimizing the device itself, it is possible to set up an environment where radiation can be measured in a reliable manner, and radiation level is monitored real-time.