• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.175-185
• /
• 2007

In IEEE 802.15.4 (Low-Rate Wireless Personal Area Network) specification, a successful reception and validation of a data or MAC command frame can be confirmed with an acknowledgment. However, the specification does not support security for acknowledgment frame; the lack of a MAC covering acknowledgments allows an adversary to forge an acknowledgment for any frame. This paper proposes an identity authentication mechanism at the link layer for acknowledgment frame in IEEE 802.15.4 network. With the proposed mechanism there is only three bits for authentication, which can greatly reduce overhead of device. The encrypted bit stream for identity authentication will be transmitted to device by coordinator within association process. Statistical method and simulation results prove that our mechanism is successful in handling MAC layer attack.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.1
• /
• pp.16-22
• /
• 2009

This paper aims at designing an impulse-radio ultra-wideband (IR-UWB) transceiver, especially targeting the IEEE 802.15.4a indoor ranging and communication systems. We first investigate the IEEE 802.15.4a IR-UWB signals and suggest the full-digital transceiver architecture accordingly. Since the wireless systems equipped with the impulse signal have the property of low-duty cycle, i.e., discontinuity in time, while the conventional systems takes the continuous signals, it is required to reconfigure the system design, including link budget. Following brief introduction to our IEEE 802.15.4a IR-UWB system hardware, we finally examine the ranging performance in indoor environments to verify our system design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.53-60
• /
• 2014

IEEE 802.15.4 is one of the most widely adopted physical layer standards in the area of LR-WPAN(Low-Rate Wireless Personal Area Network). Numerous previous researches have contributed to deep insights on energy efficiency, transmission throughput, and reliability that IEEE 802.15.4 delivers to the LR-WPAN. As a research that is orthogonal and complementary to previous researches, we explore the implementation and practical performance evaluation of IEEE 802.15.4 MAC software. We implement the MAC software from the perspective of the networking stack, exploring the issues raised when the MAC software serves as a functional component in a complete networking stack consisting of MAC, network as well as well as application support layers. The performance is evaluated on a realistic experimental software environment integrated with operating system, networking stack, and applications.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.353-358
• /
• 2012

Wireless sensor networks consist of resource constraint devices which typically send data measured by sensors attached to the end devices towards a coordinator. The most often used medium access control protocol used in wireless sensor networks is the standard IEEE 802.15.4, where it is wireless standard introduced for low power, low cost wireless communication with moderate data rates. In this paper, we present implementation of both the IEEE 802.15.4 protocol stack and UART interface on the TI CC2530. We show that data via UART of our implemented IEEE 802.15.4 board are transmitted correctly in terms of captured frames.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.178-180
• /
• 2007

In this paper, a real-time transmission algorithm based on IEEE 802.15.4 is proposed. The superframe of IEEE 802.15.4 is applied to the transmission method of real-time mixed data (periodic data, sporadic data, and non real-time message). The simulation results show the real-time performance of sporadic data is improved by using the proposed transmission algorithm.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.2
• /
• pp.9-17
• /
• 2005

Coexistence of different wireless systems that share the 2.4 GHz ISM frequency band is becoming one of the most important issue. This paper presents a model of the interference that IEEE 802.11b affected by IEEE 802.15.4. The packet error rate (PER) of IEEE 802.11b under the interference of IEEE 802.15.4 is analyzed. The PER is obtained by using the bit error rate (BER) and the collision time. Further, this paper suggests a packet length to reduce the effect of the IEEE 802.15.4 interference and obtain a maximum throughput of the IEEE 802.11b. The analytical results are validated using simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.358-363
• /
• 2010

In IEEE 802.15.4a IR-UWB (Impulse Radio Ultra Wideband) systems, it is crucial to acquire initial carrier/timing synchronization and estimate channel response by exploiting the SYNC symbols embedded in each packet. On the other hand, it is also crucial to detect the SFD pattern followed by the header and data symbols to reliably extract the information contained in the packet. In this paper, we propose a reliable SFD detection scheme utilizing some surplus SYNC symbols in addition to SFD symbols to improve the SFD detection performance.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.419-428
• /
• 2008

IEEE 802.15.4 reserves transmission time to support real-time transport by sending GTS request packets to the PAN coordinator in advance. This paper introduces GTS-FAT technique to reduce the reservation time by giving a higher sending priority to GTS request packets than data packets. Differently from the conventional scheme where these two kinds of packets share a single transmission queue, GTS-FAT scheme allocates two queues with two different contention window sizes like IEEE 802.11e. This paper also proposes an analytical GTS delay model by combining the two legacy models for 802.15.4 and 802.11e to accurately predict the GTS-FAT delay over a given network topology. Our analysis shows that GTS-FAT reduces GTS service delay by up to 50% at the expense of the data delay by only up to 6.1% when GTS request packets four times outnumber data packets.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.296-298
• /
• 2009

In this paper, we are performance analysis of IEEE 802.15.4b LR-WAPN(Low-Rate Wireless Personal Area Network; Zigbee) system noncoherent receivers at 915MHz under Jamming. IEEE 802.15.4b concerns itself with devices at 915MHz, which employ a higher data rate of up to 250 kbps, and which use O-QPSK(Offset Quradrature Phase Shift Keying modulation with DSSS(Direct Sequence Spread Spectrum). Communication between devices can still be hampered by the presence of interferers outside the network, whether the interference be intentional or not. Hence the receivers can not have stable receiving condition due to worse BER. To solve this problem, we present a mere stabilized receiver system of using noncoherent detection. In this paper, we look instead at the effect of jamming, i.e. intentional interference, on the BER performance of IEEE 802.15.4 devices.

• Journal of Internet Computing and Services
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2013

This paper proposes a technique for applying space-time block coding (STBC) - Alamouti scheme on Multiple Inputs Multiple Output (MIMO) system based on IEEE 802.15.4 standard. It is applied to IEEE 802.15.4 standard in $2{\times}1$ MISO and $2{\times}2$ MIMO systems. Simulation is performed using Matlab and the results are compared with conventional IEEE 802.15.4 approaches, Single Input Single Output (SISO) system and switching diversity $1{\times}2$ Single Input Multiple Output (SIMO) system. The simulations show that applied Alamouti scheme gave better Bit Error Rate (BER) performance compared to combined IEEE 802.15.4 with switching diversity and SISO system.