• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.2
• /
• pp.89-95
• /
• 2011

The distributed coordination function (DCF) and point coordination function (PCF) protocols are the basic MAC protocols for legacy IEEE 802.11, IEEE 802.11a, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g and IEEE 802.11n wireless LANs. When the DCF protocol is used for the various versions of IEEE 802.11 wireless LANs, the MAC performance seriously degrades due to the collisions among the stations (STAs) as more and more STAs attempt to transmit their data frames. On the other hand, the PCF MAC performance becomes poor when many STAs exist in IEEE 802.11 wireless LANs, however, only small number of STAs actually attempt to transmit their data frames. In this paper, we propose the algorithm for improving the MAC performance by selectively using the DCF and PCF protocols according to the state of IEEE 802.11 wireless LANs. Numerical examples are presented to show the MAC performance improvement by the selective use of the DCF and PCF protocols according to the network state.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.108-111
• /
• 2009

In this paper, the development of unmanned vehicle systems to analysis applicable communications and alternative IEEE 802.11a. IEEE 802.11b/g uses the 2.4GHz. So, using the 5GHz OFDM in IEEE 802.11a interference phenomenon better. IEEE 802.11a has a maximum speed of 54Mbps. Indoors and apartment parking on experiment to soft roaming, hard roaming. Test equipments are AP four units(RSU), reliable results for the AP one unit Bridge, Switch one unit, one server notebook, one notebook(OBU), one car. Use Softwares are Wireshark, Jperf, Ping and million second transfer was used to develop the program. So the actual car was similar to the environment. With the results of the experiment for the unmanned vehicle systems will provide the best method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.837-846
• /
• 2013

Recently, new technologies based on wireless LAN is being studied because utilization on smart phone using Wi-Fi is increased. 802.11 b/g/a is universalized wireless LAN technologies based on ISM, the standard developed in 11's working group of IEEE 802. standardization about IEEE 802.11ac that overcame limitation on Blue-ray of IEEE 802.11n or uncompressed video transmission and IEEE 802.af's technologies using TVWS is being actively studied. In this paper, ability of transmission considering the security on AP operated by these technologies have measured and done a comparative analysis with existing wireless LAN environment ability of transmission measured when appling security is more stable than existing ability of transmission in an environment with obstacles and shorten of transmission time is confirmed as a result of analysis.

• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.108-112
• /
• 2006

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.124-126
• /
• 2004

본 논문은 CAM(Constant Awake Mode), 및 PSM(Power Saving Mode)을 지원하는 IEEE 802.l1b[1] Infrastructure 환경에서 전송 프로토콜이 이동기기의 WNIC(Wireless Network Interface Card) 에너지 소비에 미치는 영향을 분석하고 단위 시간 동안 전송되는 데이터 양에 기반한 IEEE 802.l1b WNIC 에너지 모델을 제안한다. 제안하는 에너지 모델은 IEEE 802.l1b 환경에서 CAM 및 PSM 모드를 사용할때, 실제 측정한 값을 기반으로 설계되었다. 제안된 에너지 모델은 실험을 통하여 정확성을 검증하고, IEEE 802.l1b를 기반으로한 저전력 통신 관련 연구에서 시뮬레이션 시 사용 가능한 에너지 모델임을 밝힌다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1106-1113
• /
• 2005

This paper presents a dual-band mixer for multi-standards of IEEE 802.1la/b/g using a single local oscillator, so as to improve the defects of legacy systems. Those systems have duplicate local oscillators and mixers to handle dual band signals, increasing complexity of system and power loss. The proposed circuit shows 11.6 dB, 16.8 dB of conversion loss and 8.77 dBm, 12.5 dBm of IIP3(Input 3rd Intercept Point) for respective bands when the two RF inputs of 2.452 and 5.260 GHz are down-converted to the identical 356 MHz If frequency. The RF-LO isolations are measured 36 dB, 41 dB at each frequencies and over 50 dB of LO-IF isolations are achieved at all cases.

• Journal of Advanced Navigation Technology
• /
• v.6 no.4
• /
• pp.296-305
• /
• 2002

This paper suggests the parameters of the requirement conditions of minimum performance for a RF transceiver system design from the specifications of IEEE Std 802.11b and IEEE Std 802.11a. It has yielded the requirement conditions of minimum performance in the design process due to these parameters. A RF transceiver system is simulated by using Agilent ADS(Advanced Design System) after selecting the components of optimal conditions to fabricate the RF transceiver system. The results of both the analysis and the simulation will be used for a real wireless LAN design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.248-255
• /
• 2002

An RF module in compliance with the IEEE 802.11a standard has been designed and its performance has been measured. Conventional heterodyne architecture with 580MHz intermediate frequency has been realized. Measurement results show that the receiver has a low Noise Figure of 5dB, the maximum gain of 70dB, and dynamic range as wide as 61dB. Also, the SAW filter used for channel selection in the IF section allowed minimum inter-channel interference. in addition to satisfying the RF output power requirement, the transmitter features its output P1dB as high as 34dBm so that the high peak-to-average ratio of the Orthogonal Frequency Division Multiplexing (OFDM) modulation scheme can be handled with minimum nonlinear distortion. The output P1dB of 34dBm of the transmitter corresponds to back-off powers of 18dB and 11dB with respect to the output power for the low and the middle frequency bands, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.1996-2002
• /
• 2000

This paper investigates a priority scheme for IEEE 802.11 Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) protocol in order to provide short access times for priority frames (e.g. time-deadline traffic) even when the overall traffic on the wireless channel is heavy. Under the compatibility constraint for the IEEE 802.11 wireless LANs, two priority systems are simulated: no priority (current IEEE 802.11 standard) for time-deadline traffics and dynamic time-deadline priority. We evaluate algorithms to improve the time-deadline traffic performance using discrete event simulation (DES)

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.541-546
• /
• 2004

Space-Time Coding(STC) is a technique that utilizes joint correlation of transmitted signals in both time and space domains. Through this approach, diversity and coding gains can be simultaneously obtained. In this paper, we use SPW simulation tool to implement the IEEE 802.11a system. Based on this system, OFDM system with STC and convolutional coder concatenated is implemented. The system performance is analyzed and compared with the performance of the IEEE 802.11a system. The simulation results show that the performance with concatenated codes at a data rate of 6Mbps shows approximately a 5dB gain over the system with the convolutional code only. At a data rate of 12Mbps, the performance with concatenated codes is further improved by approximately 6dB.