• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.360-367
• /
• 2009

In this paper, we propose a design methodology of IEEE 802.11n MAC which aims to achieve the higher throughput of more than 100Mbps in downlink as measured at the MAC-SAP and present the implementation results of MAC using the proposed design methodology. With our proposed methodology, different from the conventional design flow which has the separate codes for the protocol validation, for the network simulation, and for the system implementation, the unified code can be used for the network simulation and the implementation of software and hardware. Our MAC architecture is partitioned into two parts, Upper-layer MAC and Lower-layer MAC, in order to achieve the high efficiency for the new features of IEEE 802.11n standard. They are implemented in software and hardware respectively. The implemented MAC is tested on ARM based FPGA board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.702-709
• /
• 2008

This paper presents a frequency offset estimation scheme which can be used for packet based OFDM communication systems. The proposed scheme detects the failure of performing coarse frequency offset estimation and compensates the error of estimated coarse frequency offset. The preamble structure considered in this paper is based on the preamble specified in IEEE802.11a and IEEE802.11p standards. We performed simulation to compare the performance according to the different number of reference packets used to detect the failure of performing coarse frequency offset estimation. The simulation results show that the proposed scheme has better performance than the conventional scheme in the low SNR(below 2dB) environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.95-101
• /
• 2014

Scalable video coding (SVC) encodes multimedia data into a base layer and enhancement layers to cope with variable network conditions in an adaptive manner. In SVC, enhancement layers can be decoded only when the base layer is successively received. However, existing works on SVC transmissions in IEEE 802.11 WLANs do not fully investigate this characteristic and thus their performance can be degraded. In this paper, we propose a SVC-aware retransmission (SAR) scheme in IEEE 802.11 WLANs. The SAR scheme applies different retransmission policies for base and enhancement layers by obtaining the optimal number of frames to be retransmitted. As a result, the SAR scheme can reduce unnecessary retransmissions and minimize the transmission latency. Simulation results demonstrate that the SAR scheme can reduce unnecessary data transmission by 12.6% and the transmission latency by 6.6~19.1% compared to conventional retransmission schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.543-552
• /
• 2013

For the safety messages in IEEE 802.11p/WAVE vehicles network environment, strict periodic beacon broadcasting requires status advertisement to assist the driver for safety. In crowded networks where beacon message are broadcasted at a high number of frequencies by many vehicles, which used for beacon sending, will be congested by the wireless medium due to the contention-window based IEEE 802.11p MAC. To resolve the congestion, we consider a MAC scheme based on slotted p-persistent CSMA as a simple non-cooperative Bayesian game which involves payoffs reflecting the attempt probability. Then, we derive Bayesian Nash Equilibrium (BNE) in a closed form. Using the BNE, we propose new congestion control algorithm to improve the performance of the beacon rate under saturation condition in IEEE 802.11p/WAVE vehicular networks. This algorithm explicitly computes packet delivery probability as a function of contention window (CW) size and number of vehicles. The proposed algorithm is validated against numerical simulation results to demonstrate its stability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.395-400
• /
• 2021

In this paper, the wideband patch antenna is simulated and manufactured for the wireless LAN of 5GHz band that is defined in IEEE 802.11a. In the 802.11a, 200 channels of 675MHz are defined. Therefore, the bandwidth is needed more than 12.3%. For the wideband characteristics, low dielectric constant is realized with the multi-layer of 2 teflon substrates and the air dielectric layer and the feeding method of the coupled-line is used. Optimized wideband patch antenna is simulated with the return loss of 38.99dB at the center frequency of 5.43GHz and the bandwidth of 12.9%. The gain of manufactured patch antenna is 4.38, 4.52, and 5.12dBi at the channel number of 46, 56, and 153, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.81-86
• /
• 2008

The paradigm of information & communication is rapidly changed into ubiquitous environment based electromagnetic wave, and antenna technology in the wireless ubiquitous communication is remarkably developed. Mini chip antenna has its within small card compared to the external AP antenna. Designed and Fabricated WLAN antenna has a broadband characteristics of 2.4~2.5GHz and 4.9~5.85GHz, and can be used triple mode of IEEE 802.11.a,g.b, and it has comparatively a constant performance in the dual frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1303-1310
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point (AP) when they are running in low power mode. Stations stay awake for enough time to receive beacon because it is delayed in AP if the wireless channel has been being used by other traffic at each scheduled instant. In this paper, we propose a method that measures the delay of received beacons and calculates wake-up interval of station to receive the next one. Beacon transmission delay at the AP is analyzed. The proposed method is simulated and its characteristics are described in the analysis. The result measured in terms of station's wake-up interval shows some enhancement in energy consumption.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.95-102
• /
• 2005

This paper is purpose for improvement performance wireless lan of IEEE802.11a/b/g. Access point utilized a single server, multi-queuing system, FIFS system model to adapted priority multi-bufferto be alteration packet type. The main purpose of the paper improve the transmission rate and the performance of access point to settle transmission delay for load in MAC, has priority multi-buffer. We use experimentation to obtain our model of the access point and buffer-related parameters. Using our test design, we are able to extract the parameters of an analytic equation giving the average service time of a packet as a function of packer IP payload.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.1-7
• /
• 2008

This paper describes the proposal, design, and implementation of a novel WDMX controller which can provide versatile light effects with the increased capability of the mobility and the number of universes for LED lights. Both the algorithm for DMX protocol and how to implement the frame based on a 8bit micro-controller are explained. The conversion algorithm between the DMX frame and wireless LAN 802. 11b protocol stack is introduced and implemented. In final, some experiments are made to verily the interoperability of the developed WDMX controller with a commercial product of LED lights. 최대 9,999 staves with 30 refresh rate per second may have capability to show various light effects.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.51-57
• /
• 2010

A dual-mode direct conversion receiver is developed in $0.13\;{\mu}m$ RF CMOS process for IEEE 802.11n based wireless LAN and IEEE 802.16e based mobile WiMAX application. The RF receiver covers the frequency band between 2.3 and 2.7 GHz. Three-step gain control is realized in LNA by using current steering technique. Current bleeding technique is applied to the down-conversion mixer in order to lower the flicker noise. A frequency divide-by-2 circuit is included in the receiver for LO I/Q differential signal generation. The receiver consumes 56 mA at 1.4 V supply voltage including all LO buffers. Measured results show a power gain of 32 dB, a noise figure of 4.8 dB, a output $P_{1dB}$ of +6 dBm over the entire band.