• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1018-1023
• /
• 2006

The metal chelate complex of aluminum 8-hydroxyquinolines $(Alq_3)$ is an important electro-luminescent (EL) material used in fabricating organic light emitting (OLEDs). In this work, diodes / displays using in house synthesized $Alq_3$ and simple structure have been fabricated. It is demonstrated that luminance of $12460\;cd/m^2$ and efficiency of 3.1 cd/A are achievable in these fluorescent devices. Possible degradation effects are analyzed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1429-1431
• /
• 2005

Organic molecular-beam deposition of Mg:Ag thin films with a low Mg concentration on tris (8-hydroxyquinolino) aluminum $(Alq_3)$ layers at room temperature was performed to investigate the feasibility of using Mg:Ag thin films as cathode electrodes in organic light-emitting devices (OLEDs). The effective barrier height of the $Mg:Ag/Alq_3$ heterointerface, determined from current-voltage measurements, was as low as 0.23 eV. These results help improve understanding the electrical properties of the $Mg:Ag/Alq_3$ heterointerfaces in OLEDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.675-678
• /
• 2001

We fabricated the organic light emittign diodes (OLEDs) with ITO/Cu-Pc/triphenyl-diamine (TPD)/TPD+tris-(8-hydroxyquinoline) aluminum (Alq$_3$)/Al. The electrical properties of Cu-Pc thin film were studied as a hole injection layer. the energy gap of Cu-Pc thin films is decreased according to the substrate heat treatment temperature increased. It could be controlled the hole mobility by changing the heat treatment condition of Cu-Pc. The emission wavelengths could be controlled by changing hole mobility and recombination zone in emission layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1038-1042
• /
• 2005

We have investigated dielectric properties depending on bias voltage in organic light-emitting diodes using 8-hydroxyquinoline aluminum $(Alq_3)$ as an electron transport and emissive material. We analyzed the dielectric properties of organic light-emitting diodes using impedance of characteristics. Impedance characteristics was measured complex impedance Z and phase $\theta$ in the frequency range of 40 Hz to $10^8$ Hz. We obtained complex electrical conductivity, dielectric constant, and loss tangent $(tan\delta)$ of the device at room temperature. From these analyses, we are able to interpret a conduction mechanism and dielectric properties contributed by an interfacial and orientational polarization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.490-491
• /
• 2007

We have investigated dielectric dispersion and absorption in organic light-emitting diodes using 8-hydroxyquinoline aluminum($Alq_3$) as an electron transport and emissive material. We analyzed the dielectric dispersion and absorption of organic light emitting diodes using impedance characteristics measurement by the auto-balancing bridge technique of ITO/$Alq_3$/Al. Impedance characteristics was measured complex impedance Z and phase e in the frequency range of 40Hz to $10^8Hz$. We obtained dielectric constant and loss tangent (tan $\delta$) of the device. From these analyses, we are able to interpret a dielectric dispersion and dielectric absorption contributed by an interfacial and orientational polarization.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.102-109
• /
• 2003

Microwave digestion and solid-state extraction were studied for determination of trace aluminum{Al(III)} in human urine samples. A mixed acid of nitric acid and hydrogen peroxide was added to urine samples, organic materials were destructed in a home microwave oven and dried in a drying oven. The dried residues were dissolved in a sulfuric acid solution. The solution was eluted through a XAD-4 resin column adsorbed with 8-hydroxyquinoline(Oxine, HQ). Al(III)-8-hydroxyquinolinate complex was formed in the column and eluted with 0.5 M nitric acid solution. The Al(III) eluted was determined by graphite atomic absorption spectrophotometry. Various experimental conditions of followings were investigated for the optimization : the type of acid to dissolve the residues, the amount of HQ adsorbed on the resin, the pH of sample solutions, the type and concentration of acid to elute the complex from column and so on. The contents of Al(III) in real samples were determinated by a calibration curve method. The recovery in standard spiked samples was 94~101% and the detection limit of this procedure was 0.05 ng/mL.

• Journal of Life Science
• /
• v.10 no.6
• /
• pp.591-597
• /
• 2000

An investigation was conducted to elucidate the effect of sucrose, germicides and abscisic acid (ABA) in the preservatives on postharvest quality, such as fresh weight, solution uptake, vase life, diameter and thickness of flower, and chlorolhyll of leaf in cut chrysanthemum 'Kyoungsubang`. Fresh weight of cut chrysanthemum was highest in 250mg/L aluminum sulfate [{TEX}$Al_{2}(SO_{4})_{3}${/TEX}]+3% sucrose and 250 mg/L 8-hydroxyquinoline sulfate (8-HQS)+ 3% sucrose. Addition of sucrose and germicides inhibited microorganisms growth in solution, and apparently promoted solution uptake. The increased fresh weight seems to attribute to the elevated uptake. Germicide 8-HQS was more effective than {TEX}$Al_{2}(SO_{4})_{3}${/TEX} in the aspect of solution uptake and fresh weight. Treatment of 250 mg/L 8-HQS +3% sucrose showed the longest vase life (24.67±2.52 days) and the lowest rate of leaf chlorosis (or senescence). Addition of {TEX}$Al_{2}(SO_{4})_{3}${/TEX} and sucrose accelerated leaf chlorosis and increased diameter of flower, respectively. Sucrose treatment prolonged the vase life of flowers. Except control and 250 mg/L 8-HQS, content of chlorophyll was rapidly decreased after 6 days at upper, middle and lower leaves in order.

• Horticultural Science & Technology
• /
• v.16 no.4
• /
• pp.533-536
• /
• 1998

In order to develop a pretreatment solution for cut rose, the effects of surfactants [Tween 20, Triton X-100, polyoxyethylene 4 lauryl ether (PLE)], germicides (aluminum sulfate, $AgNO_3$, dichloroisocyanuric acid, STS, benzalkonium chloride, 8-hydroxyquinoline sulfate), sucrose, and hormones (ABA and kinetin) on the longevity and quality of 'Red Sandra' were investigated in environment-controlled room. Although 20 and 50 ppm Tween 20, and 500 ppm PLE appeared, in appearance, to be effective in retarding blueing and wilting, respectively, they didn't show statistical differences as compared to distilled water control. Among germicides, $AgNO_3$ was the most effective in delaying petal blueing, petal withering, and reduction of fresh weight, regardless of its concentration, while, in the case of STS, only 1mM treatment was effective in delaying of petal withering. Only 5% sucrose treatment delayed petal blueing, petal withering, and bent neck, but showed no significant difference as compared to 500 ppm aluminum sulfate. Finally, single or combination treatments of ABA and cytokinin were found to rather stimulate the senescence of cut rose.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.780-783
• /
• 2002

We report very efficient white OLEDs consisting of a blue-emitting 4,4'bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl (${\alpha}$-NPD), a hole-blocking layer of 2,9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline (BCP) doped with red fluorescent dye of 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro- 1H, 5H-benzo[i,j]quinolizin-8-yl) vinyl]-4H-pyran) (DCM2), and green-emitting tris(8-hydroxyquinoline) aluminum ($Alq_3$). The device with the structure of ITO/${\alpha}$-NPD (50 nm)/BCP:DCM2 (0.8 %, 4 nm)/$Alq_3$ (50 nm)/LiF (0.5 nm)/Al shows a white emission with the CIE coordinates (0.329, 0.333). The maximum luminance of 20,800 cd/$m^2$ is obtained at 15.4 V. The power efficiency is 2.6lm/W and the external quantum efficiency is 2.1 % at a luminance of 100 cd/$m^2$ at the bias voltage of 6 V.

• Journal of Information Display
• /
• v.8 no.2
• /
• pp.20-24
• /
• 2007

Efficient white organic light-emitting diodes are fabricated with the blue and red electroluminescent (EL) units electrically connected in a stacked tandem structure by using a transparent doped organic p/n junction. The blue and red EL units consist of the light-emitting layer of 1,4-bis(2,2-diphenyl vinyl)benzene (DPVBi) and 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro-1H,5H-benzo[i,j] quinolizin-8-yl)vinyl]-4H-pyran) (DCM2) doped tris(8-hydroxyquinoline) aluminum $(Alq_3)$, respectively. The organic p-n junction consists of ${\alpha}-NPD$ doped with $FeCl_3$ (15 % by weight ratio) and $Alq_3$ doped with Li (10 %). The EL spectra exhibit two peaks at 448 and 606 nm, resulting in white light-emission with the Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.36, 0.24). The tandem device shows the quantum efficiency of about 2.2 % at a luminance of 100 $cd/m^2$, higher than individual blue and red EL devices.