• Structural Engineering and Mechanics
• /
• v.49 no.1
• /
• pp.95-110
• /
• 2014

The study deals with physical modeling of space frame-pile foundation and soil system using finite element models. The superstructure frame is analyzed using complete three-dimensional finite element method where the component of the frame such as slab, beam and columns are descretized using 20 node isoparametric continuum elements. Initially, the frame is analyzed assuming the fixed column bases. Later the pile foundation is worked out separately wherein the simplified models of finite elements such as beam and plate element are used for pile and pile cap, respectively. The non-linear behaviour of soil mass is incorporated by idealizing the soil as non-linear springs using p-y curve along the lines similar to that by Georgiadis et al. (1992). For analysis of pile foundation, the non-linearity of soil via p-y curve approach is incorporated using the incremental approach. The interaction analysis is conducted for the parametric study. The non-linearity of soil is further incorporated using iterative approach, i.e., secant modulus approach, in the interaction analysis. The effect the various parameters of the pile foundation such as spacing in a group and configuration of the pile group is evaluated on the response of superstructure owing to non-linearity of the soil. The response included the displacement at the top of the frame and bending moment in columns. The non-linearity of soil increases the top displacement in the range of 7.8%-16.7%. However, its effect is found very marginal on the absolute maximum moment in columns. The hogging moment decreases by 0.005% while sagging moment increases by 0.02%.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.40-44
• /
• 2000

The fatigue and tensile test were carried out with Mild steel using the Dump Frame of commercial car. The specimens were heat-treated at $810^{\circ}C$ and $930^{\circ}C$ and worked 4.5, 6.0, 8.0mm thickness in order to look over the mechanical properties and fatigue life by heat treatment and thickness from the tensile test result, the yield strength of the heat treated specimens was increased about 35% more than that of the non-heat treated specimen. The fatigue life of non-heated specimen was decreased 15% but that of heat treated specimens at $870^{\circ}C$ and $930^{\circ}C$ were decreased 16.38% and 13.16% respectably according to increasing the thickness from 4.5 to 8.0mm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.104-110
• /
• 2011

A CMOS Image Sensor (CIS) mounted on mobile appliances requires low power consumption due to limitations of the battery life cycle. In order to reduce the power consumption of CIS, we propose novel power reduction techniques such as a data flip-flop circuit with leakage current elimination and a low power single slope analog-to-digital (A/D) converter with a sleep-mode comparator. Based on 0.13 ${\mu}m$ CMOS process, the chip satisfies QVGA resolution (320 ${\times}$ 240 pixels) that the cell pitch is 2.25 um and the structure is a 4-Tr active pixel sensor. From the experimental results, the performance of the CIS has a 10-b resolution, the operating speed of the CIS is 16 frame/s, and the power dissipation is 25 mW at a 3.3 V(analog)/1.8 V(digital) power supply. When we compare the proposed CIS with conventional ones, the power consumption was reduced by approximately 22% in the sleep mode, and 20% in the active mode.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.1
• /
• pp.9-16
• /
• 2002

In this paper, we intend to demonstrate a new intuitive force-feedback device for advanced VR applications. Force feed-back for the device is tension based and is characterized by 7 degrees of freedom (DOF); 3 DOF for translation, 3 DOF for rotation, and 1 DOF for grasp). The SPIDAR-G (Space Interface Device for Artificial Reality with Grip) will allow users to interact with virtual objects naturally by manipulating two hemispherical grips located in the center of the device frame. We will show how to connect the strings between each vertex of grip and each extremity of the frame in order to achieve force feedback. In addition, methodologies will be discussed for calculating translation, orientation and grasp using the length of 8 strings connected to the motors and encoders on the frame. The SPIDAR-G exhibits smooth force feedback, minimized inertia, no backlash, scalability and safety. Such features are attributed to strategic string arrangement and control that results in stable haptic rendering. The design and control of the SPIDAR-G will be described in detail and the Space Graphic User Interface system based on the proposed SPIDAR-G system will be demonstrated. Experimental results validate the feasibility of the proposed device and reveal its application to virtual reality.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2971-2973
• /
• 2000

In this paper, we proposed the implementation of multiple access serial communications with improved transmission control. For serial communications. RS232 protocol is used and the transmitting data and is merged to form data channel. Multiple host access is configures by using the common data channel and ground channel. 8bit data transfer with variable frame size is transferred by using the 16bit host ID. Packet is composed of HEADER, receiver ID. variable length data frame, TAIL and CRC informations. Multiple hosts are allowed to transfer packet with the other hosts through the common communication channel. Byte-stuffing is used to differentiate the transfer rate of PC is performed.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.6
• /
• pp.422-426
• /
• 2005

Objective: Different types of interbody fusion cages are available for use in the surgical treatment of degenerative cervical diseases. The purpose of this study is to assess the technical feasibility, clinical efficacy and radiological results of intervertebral fusion with a carbon composite Osta-Pek frame cage (Co-Ligne AG, Switzerland) following anterior cervical discectomy. Methods: 41 patients (25males and 16females) with minimum 6months follow-up were included in the study. Disc height, cervical lordotic angle, segmental angle, and fusion rate were assessed by lateral radiographs. In this retrospective analysis, clinical outcome was assessed as evaluated according to Odom's criteria. Results: Fifty-four cages were implanted in 30 single-level, 9 two-level, and 2 three-level procedures. The mean disc height, cervical lordosis angle, segmental angle were $4.2{\pm}1.8mm,\;23.5{\pm}7.2^{\circ},\;2.3{\pm}3.3^{\circ}$ pre-operatively and $5.3{\pm}2.1mm,\;24.2{\pm}8.3^{\circ},\;3.8{\pm}3.5^{\circ}$ at 6months after the surgery. Six months after surgery, there was radiographic evidence of fusion in 92.7% (38/41) of the patients. According to Odom's criteria, 37 of 41 (90.2%) patients experienced good to excellent functional recovery. Conclusion: These clinical and radiological results suggest that the carbon composite Osta-Pek frame cages are safe and effective alternative to autologous bone graft after anterior cervical discectomy for treatment of degenerative cervical disease.

• Journal of Fashion Business
• /
• v.8 no.2
• /
• pp.126-140
• /
• 2004

The purpose of this study is to examine the fashion design applying to the hoop, which have become various since 1980. To do this, this study is investigated the origin and the changes of the hoop historically, then classified its types, and finally analyze the collections from 1980 to 2003. The hoop was appeared on the late 15th century. Then in the mid 16th century, bell-shaped farthingale was prevailed, followed by drum-shaped wheel farthingale and hausse-cul in England and France. In the 17th century, slim silhouette was popular, so that the hoop declined gradually. In the 18th century, panier and panier double were introduced which is to make side-expanded skirt silhouette. In the 19th century, crinoline and bustle were created. The hoops applied to modern collections are used various materials, techniques, and forms. It is a main item of historicism which appeared in the trend of post-modernism and the phenomenon of applying underwear to an outer garment like corset. The hoop is adapted into three ways: only with the frame of hoop, wearing a skirt with some parts of the frame exposed on purpose, and wearing a skirt on the frame, thus not showing the frame. Thus, it is thought that wearing a hoop as a frame is used an element of recreation of past fashion, at the same time it was affected by historicism which is a branch of post-modernism. Applying the hoop as an outer garment may be affected by eroticism which changed underwear into an outer wear in postmodernism and deconstructivism.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.166-169
• /
• 2007

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7 ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.3
• /
• pp.380-388
• /
• 2005

Lipid characteristics of 6 species of fish frame (armored weasel-fish, AW; chum salmon, CS; spanish mackerel, SM; common mackerel, CM; conger eel, CE and skipjack tuna, ST) were studied by determining total lipid (TL) contents, lipid classes, and fatty acid composition. The highest yield of bone was obtained from ST frame (64.2%), followed by CS frame (57.9%), CE frame (54.6%), A W frame (41.6%), SM frame (41.7%), and CM frame (32.6%). The highest neutral lipid content was also found in total lipid (TL) from SM bone (23.3 g/100 g), followed by TL from CE bone (21.5 g/100 g), CS bone (16.0 g/100 g), and CM bone (15.5 g/100 g), while those from ST and A W bones were 7.2 g/100 g and 0.4 g/100 g, respectively. The prominent lipid classes of neutral lipids (NL) from all fish bones and muscles were triglyceride (TG), however, which was much lower in AW than in other fishes. The percentages of EPA and DHA in NL from fish bone were in the descending order of CS (29.3%), ST (27.1%), AW (27.0%), CM (25.7%), SM (21.6%), and CE (14.9%). Based on the lipid characteristics, the CS frame was the best resource for extraction of a functional lipid.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1
• /
• pp.10-15
• /
• 1997

In this paper, an efficient LSF quantizer, named improved PSVQ(IPSVQ), is proposed to apply in the 8 kbps QCELP speech coder. By using 27 bits IPSVQ instead of 40 bits DPCM quantizer per frame, we can save 13 bits/frame and allocate those bits to the codebook gain and the pitch gain parameters. Hence we improve the overall performance of the QCELP codec. The enhanced QCELP shows the performance improvement of 0.9 dB SNR and 0.4 dB SEGSNR. Informal listening tests also confirm the improvement in the speech quality.