• Membrane Journal
• /
• v.29 no.5
• /
• pp.246-251
• /
• 2019

Facilitated transport membranes using silver nanoparticles as carriers for olefin/paraffin separation have been interested. $AgBF_4$ has been used as a precursor of silver nanoparticles in previous studies. However, relatively expensive $AgBF_4$ is not suitable for commercialization, and thus, PEBAX-5513/AgNPs (precursor: $AgClO_4$)/7,7,8,8-tetracyanoquinodimethane (TCNQ) composite membranes were prepared using silver nanopaticles with relatively inexpensive $AgClO_4$ precursors. Composite membranes of various compositions were prepared for PEBAX-5513/AgNPs/TCNQ composites, but no separation performance was observed. As a result of FT-IR analysis, it was confirmed that silver nanoparticles were formed in the PEBAX-5513 polymer and the surface of Ag nanoparticles was polarized by TCNQ, but the formed silver nanoparticles were not stabilized. From these results, it was concluded that the anion of the precursor plays an important role in the olefin/paraffin separation.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.417-422
• /
• 2014

The poly(ethylene oxide) (PEO)/Ag Nanoparticles (NPs)/7,7,8,8-Tetracyanoquinodimethane (TCNQ) membrane was fabricated to obtain highly permeable facilitated olefin transport nanocomposite membrane, compared with PEO/Ag NPs/p-Benzoquinone (p-BQ) membrane. Polymer matrix, PEO and silver nanoparticle precursor $AgBF_4$ were fixed at 1 : 0.4 mole ratio and electron acceptor TCNQ content was controlled variously. And the best olefin separation performance was obtained at 1/0.4/0.004 mole ratio, and long-term separation performance was measured at this ratio. As a result, mixed-gas permeance decreased from 23 to 6 GPU, and selectivity decreased from 6 to 2 (propylene/propane) after 32 hours.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.224-229
• /
• 2006

Quaternary ammonium salt terminated silane was prepared from aminopropyldimethylethoxysilane with methyliodide and ionized 7,7,8,8-tetracyanoquinodimethane $(Li^+TCNQ^-)$ was prepared from TCNQ with methyliodide and lithium iodide. Quaternary ammonium salt silane-TCNQ adduct (ST) was prepared by reacting quaternary ammonium salt terminated silane with $Li^+TCNQ^-$ solution. Poly (dimethylsiloxane)-ST adduct (PST) was prepared by condensation of $\alpha,\omega-hydroxyl$ group terminated poly (dimethylsiloxane) (PDMS) with ST. Maleated polyethylene modified with PDMS (PST-g-MPE) was prepared by melt polymerization of maleated PE and PST in internal mixer and PST-g-MPE/carbon black (CB) and MPE/CB composites were prepared by compounding PST with MPE and PST-g-MPE, respectively. The thermal and mechanical properties of the composites were measured and dispersion characteristics of CB in matrix rosins show that the dispersion of CB in PST-g-MPE/CB was better than that of MPE/CB composite.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.948-952
• /
• 2008

The molecular association of acceptors with electron donors is studied in the highly-polar solvent $CH_3CN$. Tetracyanoquinodimethane (TCNQ) forms a stable charge-transfer complex with donor molecules such as 4- aminobiphenyl (4-AB), benzidine (BD) and 2-aminobiphenyl (2-AB) with high association constants. The complexes of TCNQ with 4-AB or BD show new absorption bands at around 800 and 500 nm, which can be identified as reduced $TCNQ^{{\bullet}-}$ and $TCNQ^{2-}$ species, respectively. These bands grow quickly upon photoirradiation, implying that the charge-transfer complexes are easily formed in an excited state. Conversely, a small spectral manifestation of the charge transfer was observed in the case of 2-AB complex. It is demonstrated that the structural orientation between the geminate ion pairs could play an important role in building a stable complex.

• YAKHAK HOEJI
• /
• v.43 no.4
• /
• pp.437-441
• /
• 1999

Enoxacin[1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-\piperazinyl)-1,8-naphthyridine-3-carboxylic acid, ENX] is a new quinolone antibacterial agent. The method is based on the highly colored charge-transfer complex formation of this drug as a $\pi$-electron donor with 7,7,8,8-tetracyanoquinodimethane(TCNQ) or chloranil(CL) as $\pi$-acceptors. The colored products were measured spectrophotometrically at 842 nm and 552 nm for TCNQ and CL, respectively. The different experimental conditions are optimized. The linearities for TCNQ and CL were $1.6{\;}\mu\textrm{g}/mL~32{\;}\mu\textrm{g}/mL$ and $6.4{\;}\mu\textrm{g}/mL~160{\;}\mu\textrm{g}/mL$, respectively and colors were produced in non-aqueous media. This report describes a simple and ra\pid method for the analysis of enoxacin.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.12
• /
• pp.1754-1758
• /
• 2002

Tetrathiafulvalene(TTF) reacts with $PdCl_2,Pd(NO_3)_2$ and $Pd(hfacac)_2$(hexafluoroacetylacetonate) in ethanol to give $(TTF)_{1.5}PdCl_2$ (1a), $(TTF)_3Pd(NO_3)_2$ (1b) and $(TTF)_4Pd(hfacas)_2$ nd (1c), respectively. $PdCl(TCNQ)_{2.5}{\cdot}CH_3OH(2a)$was obtained from the reaction of $PdCl_2$ with LiTCNQ in methanol via the partial replacement of $Cl^-$ in $PdCl_2$ by $TCNQ^-$anion, whereas the total substitution of the labile $NO_3^-$ in $Pd(NO_3)_2$ yielded pd(TCNQ)·$CH_3OH$ (2b). $Pd(hfacac)_2(TCNQ)_2\cdot3CH_3OH$ (2c) was obtained from $Pd(hfacac)_2$ and LiTCNQ in methanol. The prepared compounds were characterized by spectroscopic (IR, UV, XPS) methods and magnetic (EPR, magnetic susceptibility) studies. The powdered electrical conductivities (${\sigma}_{rt}$) of the prepared compounds at room temperature were about~$10^{-7}S{\cdot}cm^{-1}$. The effective magnetic moments were lass than the spin-only value of one unpaired electron and no EPR signals from Pd metal ions were observed in any of the compounds, indicating that the Pd ions were diamagnetic and the magnetic moments arose from$(TTF)_n$ or $(TCNQ)_n$ moieties. The experimental evidences revealed that the charge transfer had occurred form $(TTF)_n$ moiety to the central Pd metal ion in 1a, 1b and 1c. Thus the TTF donors were ions in 2a and 2b were diamagnetic Pd(II) oxidation state. In contrast, the Pd metal ion was oxidized to Pd(IV) state in 2c as a result of an addition of $TCNQ^-$anion to $Pd(hfacac)_2$ in methanol. The oxidation states of the Pd metal ions were confirmed using the x-ray photoelectron spectroscopy.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3448-3450
• /
• 2012

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.167-171
• /
• 1988

Formation of intermolecular charge-transfer complexes between 7,7,8,8-tetracyanoquinodimethane (TCNQ) and two different series of stilbene derivatives has been studied spectroscopically at $25^{\circ}$C in 1,2-dichloroethane. The compounds of Series I include stilbene and derivatives which have fused phenyl rings on one end of the central ethylene structure and a phenyl ring on the other end. The other Series, II, is comprised of stilbenes which have various para substituents on one of the two phenyl rings. The equilibrium constant, $K_c^{AD}$ and the molar extinction coefficient, ${\varepsilon}_{\lambda}^{AD}$, were determined using the Scott equation. The values of the charge-transfer transition frequency, ${\vu}_AD$ and $K_c{AD}$ correlated well respectively with the ionization potentials of the fused rings of Series Ⅰ or of the compounds of Series II and with the values of ${\sigma}_p$, the Hammett constants of the Series II substituents. trans-4-N,N-Dimethylaminostilbene and trans-4-nitrostilbene were found to be able to participate in electron transfer reaction with TCNQ forming the corresponding anion radical, TCNQ$^-$:

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.166-167
• /
• 2009

본 연구에서는 2,3,5,6-fluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ)를 이용한 유기 발광 소자의 전기적 특성에 대하여 연구하였다. F4-TCNQ 는 높은 전자 친화도를 가지고 있어서 전하 수송층이나 전하 주입층에 많이 사용되고 있다. 또한 TCNQ 유도체들은 물질의 전도도를 조절하는 용도로 많이 이용된다. TCNQ 유도체를 유기 발광 소자의 전하 수송층이나 전하 주입층에 이용할 경우, 소자의 구동 전압이나 효율과 같은 특성들이 향상된다고 알려져 있다. 우리는 소자 특성에 있어서 F4-TCNQ의 영향을 알아보기 위해서 ITO(170nm)/TPD(40nm)/$Alq_3$(60nm)/LiF(0.5nm)/Al(100nm)의 구조로 기본 소자를 제작하였다. 그리고 TPD층에 F4-TCNQ를 도핑하여 소자를 제작하였다. 도핑 농도는 5와 10%로 하였다. 또한 ITO와 TPD층 사이에 F4-TCNQ층을 1, 2, 그리고 5nm의 두께로 하여 소자를 제작하였다. F4-TCNQ를 5와 10% 도핑한 소자의 구동 전압은 도핑하지 않은 소자에 비해 감소하였다. 그리고, ITO와 유기물층 사이에 F4-TCNQ층을 삽입한 소자의 특성은 삽입하지 않은 소자에 비해 향상되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.275-276
• /
• 2009

We have studied physical properties of organic light-emitting diodes (OLEDs) in a device with 7,7,8,8-tetracyanoquinodimethane (TCNQ). Since the TCNQ has a high electron affinity, it is widely used for a charge-transport and injection layer. And the TCNQ-derivatives have also been used to control the conductivity of the materials. It is known that a charge injection and transport in OLEDs with a TCNQ-derivative enhances a performance of the devices such as operating voltage and efficiency. To see how the TCNQ affects on the device performance, we have made a reference device in a structure of ITO(170nm)/TPD(40nm)/$Alq_3$(60nm)/LiF(0.5nm)/Al(100nm). And several type of devices were manufactured by doping TCNQ either in TPD or $Alq_3$ layer. The TCNQ layer was also formed in between the organic layers. N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD), tri(8-hydroxy quinoline) aluminium ($Alq_3$), and TCNQ layers were formed by thermal evaporation at a pressure of $10^{-6}$ torr. The deposition rate was $1.0{\sim}1.5\;{\AA}/s$ for TPD, and $1.0{\sim}1.5\;{\AA}$ for $Alq_3$. The LiF was thermally evaporated at a deposition rate of $0.2\;{\AA}/s$ successively. The device with TCNQ-derivative improved the turn-on voltage compared to the one without TCNQ-derivative.