• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.31-41
• /
• 2016

This study was conducted to develop a handy earth auger for use in sloppy and rugged forest terrains in order to reduce labor cost which comprises a major part of the production costs in forest afforestation projects. The first prototype is developed consist of two parts, the soil-digging screw and the battery power source. The specifications of the first prototype screw are: length of 170mm, a top diameter of 60mm, bottom diameter of 47mm, 23° angle for each helix, and a 50mm awl-head tip. The use of a single line of screw was selected for reduced weight. In addition, a power source of rotary DC Motor(WD-6G2425, WONILL, Korea) with a maximum torque of 30kgf-cm, rotation of 20-30rpm, K6G30C decelerator with a reduction ratio of 30:1 which could be used with no load for 48 was operated. In consideration of its weight, a lithium battery was utilized in line with the goal of developing a lightweight auger. In order to evaluate the performance of the first prototype, test sites were selected as 6 areas. The rotational force was found to be highest in area A(Solid area), followed by areas F(Mounted slope 40° area) and E(Mounted slope 30° area). It was also observed that in general, the rotational force increased along with the increase in soil depth with the maximum rotational force recorded at 10cm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.269-275
• /
• 1981

The fishing hooks were tested for breaking and unbending due to plastic deformation of the material. Study of tensile test is not complicated, but has not even worked out fully enough, especially when the test specimen is subjected to plastic deformation. The fishing hook is subjected to unbending stress and the critical section is a Point which is furthest from the line of action of the forces. The dynamic force of fish during jerks depends on their speed of movement and body weight, the kinetic energy corresponding to it and also on the rlastic displacement of the rigging which absorb the energy. Six kinds of hook were tested by the dynamometer under tensile speed 290mm/min (subscript s) and 780mm/min (subscript f). According to their results, the breaking load(B: kg) can be induced with the formula $B={\alpha}wd^2+\beta$ where w(mm) is the distance between the barb base and the lower shank and d(mm) is diameter. The coefficients of the formula for the round hooks(R) and the angular hooks(A) are approximately as follows: $$R:\;\alpha_{s}=0.5,\;\beta_{s}=1.6,\;\alpha_{f}=0.4,\;\beta_{f}=1.4$$ $$A:\;\alpha_{s}=1.1,\;\beta_{s}=2.0,\;\alpha_{f}=1.0,\;\beta_{f}=0.9$$ The ratio of $B_{f}\;to\;B_{s}$ is corresponding to 0.8. The ratio of deformation(X) that is moved distance of barb base at break to the distance(H) between head base and barb base is about $50\%$. Further study should be carried out on the subject of impact and fatigue test under the same condition which is exerted force by the hooked fish.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.45-53
• /
• 1993

In this paper the voltage controlled GIC is classified into two structures, one has the dependent port conductance and the other has the independent port conductance. Nine kinds of configuration for the WDF with two voltage controlled GICs have been found and the design method for WD-LPF has been shown as an example. Their hardware complexity and amplitude characteristics are nearly same as the existing ones, but amplitude error according to coefficient quantization is reduced to about 5% of the error in existing structures. As the result of the numerical analysis of the RPSD to check up the product quantization effect at the WDF output, four kinds of proposed structures have about 10dB less RPSD than existed ones for 6 bits .leq.B .leq.20 bits.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.21-31
• /
• 1998

In this paper, a thermo-mechanical model for viscous coupling(VC) was suggested and torque equation in viscous mode was derived considering the effects of geometry of the plates, thermo-mechanical dynamics, silicon oil characteristics and dissolved air characteristics in the silicon oil. Theoretical results were in good accordance with experimental results demonstrating that VC thermo-mechanical model and the theoretical equations, response of the torque transmitted, pressure, temperature and time to the hump were investigated. Simulation results showed that filling rate of the silicon oil plays an integral role not only in the steady state torque characteristics but also in determining the time to hump.

• Journal of Ship and Ocean Technology
• /
• v.10 no.1
• /
• pp.27-37
• /
• 2006

Current loads acting on offshore vessels are important for predicting the hydrodynamic and structural responses of the vessels. It is also true for analyzing the behavior of moored systems under the action of ocean current. Unfortunately there are few standardized current load coefficients for offshore vessels and it is extremely difficult to be applied to arbitrary hull shapes, if any. Therefore current load coefficients for three hull shapes are calculated in this study using a CFD code, which is well known in the shipbuilding industry. In order to validate the present approach, a typical VLCC is taken as numerical example and resulting current coefficients are compared with experiment together with the OCIMF data. The comparison shows a good agreement in the qualitative sense. Two additional models considered herein are a shuttle tanker and a FPSO under deepwater condition $(WD/T{\geq}6)$. The present numerical approach may be utilized for practical design of offshore vessels.

• Review of KIISC
• /
• v.11 no.6
• /
• pp.12-23
• /
• 2001

지식정보사회에서 모든 유통 및 관리 정보의 보호를 위하여 다양한 형태의 보호서비스가 활용되고 있다. 이러한 보호 서비스 중에서 민감한 정보의 비밀성을 보장하기 위한 암호 기법의 연구 개발과 이를 전자정부의 구현과 전자상거래와 같은 사업에의 적용에 따른 시장 점유와 연계된 표준화 활동이 암호기술 선진국을 중심으로 전개되고 있다. 이에 대하여 우리나라에서도 한국정보보호진흥원을 중심으로 국내 정보보호 분야 전문가들과 함께 개발하여 이미 TTAS.KO-12.0004(1999.9)로 단테 표준화한 SSED를 지난 ISO/IEC JTC 1/SC 27 동경회의(2000. 10)에 제안하여 최근 국내에서 산업자원부 기술표준원이 개최한 ISO/IEC JTC 1/SC 27 서울회의(2001. 10)를 통하여 3차 WD에 수용되기에 이르렀다. 본 고에서는 비밀성 서비스를 지원하는 블록 암호 알고리즘의 지역(AES, NESSIE, CRYPTREC) 및 국제(ISI/IEC JTC 1) 표준화활동을 분석 정리하고 특히 ISO/IEC JTC 1/SC 27에서 블록 암호 회의를 통한 SEED의 국제표준화 활동을 소개하기로 한다.

• The Korean Journal of Pain
• /
• v.22 no.2
• /
• pp.151-157
• /
• 2009

Background: We hypothesized that if a fluoroscopic image of the lumbar sympathetic ganglion block (LSGB) showed the spread patterns of contrast at both the L2/3 and L4/5 disc areas, then this would demonstrate a more profound blockade effect because the spread patterns are close to sympathetic ganglia. In addition, we compared the effects of LSGB and transforaminal epidural steroid injection (TFESI) for the patients suffering with spinal stenosis. Methods: Eighty patients were divided into two groups (Group S: the patients treated with TFESI, Group L: the patients treated with LSGB). The patients of group L were classified into three groups (groups A, B and, C) according to their contrast spread pattern. The preblock and postblock temperature difference between the ipsilateral and contralateral great toe ($DT^{pre}$, $DT^{post}$, $^{\circ}C$), and the DTnet were calculated as follows. $DT^{net}$ = $DT^{post}$ - $DT^{pre}$. Results: Both group showed a significant reduction of the visual analogue score (VAS) and the Oswestry disability index (ODI) score. Only the patients of group L showed a significant increase of their walking distance (WD). Group A showed the most significant changes in the $DT^{post}$ ($6.1{\pm}1.2^{\circ}C$, P = 0.021), and the DTnet ($6.0{\pm}1.0^{\circ}C$, p = 0.023), as compared to group C. Conclusions: LSGB showed a similar effect on the VAS, and ODI, and a significant effect, on WD, compared with TFESI. Group A showed a significant sympatholytic effect, as compared to group C.

• Journal of Korea Water Resources Association
• /
• v.54 no.6
• /
• pp.433-442
• /
• 2021

In order to examine the characteristics of tidal wave from the estuary to upsteam of tidal river, tidal asymmetry was identified based on analysis of the harmonic constants of M2 and M4 tidal constituents in the domestic western coastal regions. As shallow water tide is greatly developed in the estuary, flood dominance in Han River and Keum River, and ebb dominance in Youngsan River are developed. These tidal asymmetries can be reconfirmed by analyzing the tidal current data. Unlike having reciprocating tidal current patterns in Keum and Youngsan estuaries, rotaing tidal current pattern is shown in the Han River estuary due to the complex topography and waterways around Ganghwa Island area. However, when residual current is removed, flood dominance is shown in consistency with the tide data. The tidal asymmetry in the estuary tends to intensify with the growth in shallow water tide as the tidal wave propagates to upstream of tidal river. Energy dissipation, in shallow Han River and Keum River classified as SD estuaries, is very large regarding bottom friction characteristics. On the other hand, the deep Youngsan River, classified as a WD estuary, shows less energy dissipation.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.6
• /
• pp.699-711
• /
• 2014

This study was carried out to analyze water suspension in the water supply system through fault tree analysis. And quantitative factors was evaluated to minimize water suspension. Consequently the aim of this study is to build optimal planning by analyzing scenarios for water suspension. Accordingly the fault tree model makes it possible to estimate risks for water suspension, current risks is $92.23m^3/day$. The result of scenario analysis by pipe replacement, risks for water suspension was reduced $7.02m^3/day$ when replacing WD4 pipe. As a result of scenario analysis by water district connections, the amount of risk reduction is maximized when it is connecting to network pipe of D Zone. Therefore, connecting to network pipe for D Zone would be optimal to reduce risk for water suspension.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.148.1-148.1
• /
• 2013

투어멀린는 $XY_3Z_6(Si_6O_{18})(BO_3)_3$ 화학 방정식을 가진 광물로써 조성에 따라 alkali 투어멀린, calcic 투어멀린, X-site vacant 투어멀린 등으로 불린다. 투어멀린 특성과 화학성분에 따라 종을 구분하는데, 주된 종들은 엘바이트, 리디코타이트, 드라바이트, 우바이트, 숄이 있다. 일반적으로 적색 투어멀린의 발색 원인은 Mn, Fe 그리고 Cu의 함량에 따라 색상의 차이를 나타낸다. 본 연구에서 우리는 10MeV 에너지와 $1{\times}10^{17}cm^2$ 조건에서 전자빔을 수행 한 후 투어멀린의 컬러 변화를 관찰하였다. 자외선-가시광선 분광분석결과 모든 시료는 전자빔 조사 후 530 nm의 $Mn^{3+}$부근의 흡수 peak들이 증가하는 것이 관찰되었다. 이는 $Mn^{2+}$에서 $Mn^{3+}$ 이동 때문이여, $Mn^{3+}$는 Y-site에서 O(1)H-O(3)H 축에 따라 Jann-taller 변형으로 안정된 구조를 가지게 된다. 따라서 전자빔 조사 후 적색으로 변하게 되는 것이다. 또한 전자빔 조사 후 컬러가 모두 변했지만 상온에 뒀을 때 변화 된 컬러가 원래의 색으로 되돌아가는 향상을 보였다. 이는 전자빔 조사 후 전자가 튕겨져 나가서 불안정한 상태로 존재하고 있다가 상온의 열에 의한 에너지에 통해 다시 안정된 상태로 되돌아오는 결과로 볼 수 있다. 또한 우리는 WD-XRF를 통해 미량의 Mn 원소함량 차이에 따라 전자빔 조사 시 컬러 변화에 미치는 영향에 대해 확인할 수 있었다. 그리고 적외선 분광분석에서는 4,300-4,600 $cm^{-1}$사이에 특징적인 밴드들이 관찰되었다.