• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.577-583
• /
• 2007

To overcome certain disadvantages of past typical control techniques for toxic contaminants emitted from various industrial processes, the current study was conducted to establish a thermal catalytic system using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst and to evaluate catalytic thermal destruction of five chlorinated hydrocarbons[chlorobenzene(CHB), chloroform(CHF), perchloroethylene (PCE), 1,1,1-trichloroethane(TCEthane), trichloroethylene(TCE)]. In addition, this study evaluated the catalyst poison effect on the catalytic thermal destruction. Three operating parameters tested for the thermal catalyst system included the inlet concentrations, the incineration temperature, and the residence time in the catalyst system. The thermal decomposition efficiency decreased from the highest value of 100% to the lowest value of almost 0%(CHB) as the input concentration increased, depending upon the type of chlorinated compounds. The destruction efficiencies of the four target compounds, except for TCEthane, increased upto almost 100% as the reaction temperature increased, whereas the destruction efficiency for TCEthane did not significantly vary. For the target compounds except for TCEthane, the catalytic destruction efficiencies increased up to 30% to 97% as the residence time increased from 10 sec to 60 sec, but the increase of destruction efficiency for TCEthane stopped at the residence time of 30 sec, suggesting that long residence times are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Conclusively, the current findings suggest that when applying the transition-metal catalyst for the better destruction of chlorinated hydrocarbons, VOC type should be considered, along with their inlet concentrations, and reaction temperature and residence time in catalytic system. Meanwhile, the addition of high methyl sulfide(1.8 ppm) caused a drop of 0 to 50% in the removal efficiencies of the target compounds, whereas the addition of low methyl sulfide (0.1 ppm), which is lower than the concentrations of sulfur compounds measured in typical industrial emissions, did not cause.

• Journal of Food Hygiene and Safety
• /
• v.37 no.5
• /
• pp.310-316
• /
• 2022

In this study, we compared the microbial reduction effects of drying, hot water, and microwave sterilization in scourers and dishcloths to suggest a most suitable sterilization method. Three scourer types (silver, copper, and mesh) were used, and three dishcloth types (silver, bamboo, and cotton) were used. Drying time dependent reduction in Escherichia coli was high in silver and copper scourers, but minimal bacterial reduction was obtained against Bacillus cereus in all scourers and dishcloths. In scourers, E. coli was not detected after ≥30 s of hot water sterilization at 77℃, and B. cereus was not detected after ≥60 s of hot water sterilization at 100℃. In dishcloths, E. coli was not detected after hot water sterilization at 77℃ for ≥30 s, but B. cereus was detected after hot water sterilization at 100℃ for ≥60 s. In scourers, E. coli was not detected after microwave sterilization at 700 W for 3 min, but B. cereus was detected. In dishcloths, E. coli was not detected after microwave sterilization with 700 W for ≥1 min, but B. cereus was detected in the cotton dishcloth even after sterilization for 3 min. In conclusion, the use of antimicrobial scourers (silver and copper) and dishcloths (silver and bamboo) are not sufficient to reduce the microbial contamination. The guideline provided by the Ministry of Food and Drug Safety suggesting dishcloth sterilization via hot water at 100℃ for 30 s was also found to be insufficient. Based on our research, we suggest that the most effective methods of microbial management are submerging scourers in hot water at 100℃ for ≥1 min, and sterilizing dishcloths for ≥3 min using a 700 W microwave.

• Korean Journal of Ecology and Environment
• /
• v.36 no.1 s.102
• /
• pp.21-28
• /
• 2003

Community composition and functional feeding groups of aquatic insects according to stream order were investigated from the Gapyeong Creek, a typical mid-sized Korean stream in Gyeonggi -do, Korea, in April 2000. For field investigations, the main watercourse and three major tributaries of the stream that belong to stream order ll to Vll were divided into reaches (ca. $1{\sim}4$ km in distance). Aquatic insects were sampled from one or two sites each reach (total 30 sites) using a Surber sampler ($50{\times}50$cm, mesh 0.75 mm). As a result of the quantitative samplings(two Surber samplings at riffle and pool/run per site; total $2{\times}30$=60 Surber samplings) and additional qualitative samplings, a total of 164 species of aquatic insects in 103 genera, 54 families, and 8 orders were collected from the stream. Those aquatic insects were composed of Trichoptera (56spp.: 34.1%), Ephemeroptera (43 spp.: 26.2%), Diptera (25spp.: 15.2%), Plecoptera (23 spp.: 14.0%), Coleoptera (6 spp.: 3.7%), Odonata (6 spp.:3.7%), Hemiptera (3 spp.: 1.8%), and Megaloptera (2 spp.: 1.2%); EPT-group (122 spp.:74.4%) or EPT-group plus Diptera (147 spp.: 89.6%) occupied most of the aquatic insect community; relatively larger number of species occurred in the mid-stream reaches (order III-Vl). The quantitative samplings throughout the study sites yielded a total of 26,286 individuals of aquatic insects ($136{\sim}2522$ inds./0.5 $m^2$, mean 906.4inds./0.5 $m^2$) that belongs to Ephemeroptera (11,994 inds.: 45.6%), Diptera (8730 inds.:33.2%), Trichoptera (4123 inds.: 15.7%), Plecoptera (1213 inds.: 4.6%), Coleoptera (204 inds.: 0.8%), Odonata (13 inds.: 0.05%), Megaloptera (5 inds.: 0.02%), and Hemiptera (4inds.: inds.: 0.02%); average number of individuals of aquatic insects increased as the stream order increased: average numbers of individuals of Bllecoptera and Trichoptera decreased and increased, respectively, as the stream order increased. Tolerant species such as Chironomidae spp., Uracanthella rufa and Hydropsychidae spp. were particularly abundant in the down stream reaches (order Vll) . Species diversity indices (H`) and dominance indices (Dl) were relatively higher and lower, respectively, in the mid-stream reaches (order $IV{\sim}VI$). Shredders occupied the smallest partand collector-gatherers were most abundant among the functional feeding groups(FFGs); collector-filterers considerably increased in the down stream reaches (orders Vl and VII); scrappers were relatively evenly distributed throughout the stream reaches: predators were relatively more abundant in the uppermost stream reaches(order ll) . Overall, the characteristics of aquatic insect comminity and FFGs in the Gapyeong Creek are largely similar to those in the normal streams of temperate deciduous forest in the northern hemisphere that is explained by the river confineum concept.

• Journal of Yeungnam Medical Science
• /
• v.11 no.2
• /
• pp.293-302
• /
• 1994

The objective of this study was to establish a good methodology to isolate single smooth muscle cells that are alive and respond properly to pharmacological agents. Canine urinary bladders were employed as the source of single cells, and acetylcholine, atropine and imipramine were used as indicators of pharmacological responsiveness. Imipramine, an antidepressant drug exhibited the anticholinergic and calcium antagonizing properties on rat detrusor muscle. To establish a control value for a further experiment to elucidate the mechanism of action of imipramine on detrusor muscle, we measured the concentration-response of single cells to acetylcholine in the presesnce of imipramine by length of the cells and compared the result with the response in the presence of atropine. Tiny chops of smooth muscle taken from anesthetized canine urinary bladder were incubated in collagenase solution at $36^{\circ}C$ for 17-20 minutes. The collagenase solution included collagenase 1.2 mg/ml, soybean tryspin inhibitor 0.08 mg/ml, bovine serum albumin 2% in 10 ml Krebs-Henseleit buffer solution aerated with a consistent breeze of 95/5% $O_2/CO_2$, to maintain the pH at 7.4. After washing with plain K-H solution on 450 mesh, cells were dissociated from the digested tissue for 12-15 minutes. Cell suspension was transfered in 5 ml test tubes and acetylcholine was added for the final concentration to be $10^{-14}M{\sim}10^{-9}M$. To find the optimal time to fix the cells to determine the contractile responses, 1% acrolein was added 5, 10, 20, 30, 60 and 120 seconds after the administration of ACh. The length of cells fixed by acrolein were measured by microscaler via CCTV camera on phaes-contrast microscope. The average length of 50 cells from a slide glass was taken as the value of a sample at the very concentration point. Single cells were isolated from canine detrusor. The length of untreated cells varied from 82 ${\mu}m$ to 94 ${\mu}m$. The maximal response to actylcholine $10^{-9}M$ was accomplished within 5 seconds of exposure, and the shortening was $19{\pm}3$%. Atropine reduced the contraction of the cells concentration-dependently. Imipramine which exerts a cholinergic blocking action on some smooth muscles also reduced the contraction concentration-dependently and by a similar pattern as atropine. These findings document that imipramine may exerts a cholinergic blocking activity in the single smooth muscle cells isolated from canine urinary bladder.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.1
• /
• pp.55-60
• /
• 1986

The objective of this study was to investigate the physical and chemical factors of Pinus densiflora SIEB. et ZUCC. and Quercus mongolica Fisher barks affecting on the adsorption of heavy metals. The results obtained can be summarized as follows: 1. With decreasing the particle size of bark, the adsorption rate of two heavy metal ions were increased. In case of using same particle size, the adsorption of $Fe^{++}$, and $Ni^{++}$ by Quercus bark showed higher than by Pinus bark. 2. The effect of untreated bark on the adsorption of heavy metal was more or less 5% higher than that of HCHO-treated bark in both species. But the color absorbances of the filtrates from HCHO-treated Pinus and Quercus barks were 5.8 and 11.8 times smaller than those of the filtrate from untreated Pinus and Quercus barks, respectively. 3. The maximum adsorption of $Fe^{++}$, and $Ni^{++}$ by bark was shown after 30 min. of the reaction. 4. With increasing the concentration of heavy metal, the amount of adsorption by bark was increased, but the adsorption ratio were decreased. 5. The maximum adsorption of $Fe^{++}$, and $Ni^{++}$ appeared at final pH of $4{\sim}5$, and pH of $3.6{\sim}4.0$ in filtrate, respectively. 6. With increasing the bark weight per a given heavy metal solution, the adsorption ratio were increased, but the amount of adsorption per gram of bark was the highest on the reaction with 2g of bark in a economical sense showing the amount of adsorption of 21mg $Fe^{++}$/g and 7mg $Ni^{++}$/g of Pinus bark, 36mg $Fe^{++}$/g and 9mg $Ni^{++}$/g of Quercus bark, respectively.

• Korean journal of food and cookery science
• /
• v.18 no.2
• /
• pp.216-224
• /
• 2002

Persimmon powder (PW), which was prepared by pulverizing freeze-dried persimmon with peels, was added to Maejakgwa up to 25% of wheat flour. Maejakgwa samples were prepared by the central composit experimental design for three independent variables: amount of PW, frying time, and frying temperature. The color of Maejakgwa was influenced more by the frying time and temperature than the content of added PW. Crispiness and adhesiveness were highly correlated with overall preference. Although the amount of PW affected the adhesiveness, the adhesiveness could be controlled by the frying temperature and time. Frying temperature was the most effective factor on the crispness and hardness. The addition of high amount of PW obviously increased the sweetness and aftertaste. However, at the low amount of PW, frying for longer time at high temperature also increased the sweetness and aftertaste. Center sample (15% PW, frying for 4 min at 145$\^{C}$) showed the best score at the overall preference. Overall preference was improved as the sample was fried at high temperature/short time or at low temperature/long time. Maejakwa prepared with high amount of PW at 20% showed no significant difference with the center sample for overall preference as prepared by frying for 3 min at 155$\^{C}$. The optimum condition obtained by superimposing color, crispiness and overall preference was frying for 5∼6 min at 131∼140$\^{C}$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.121-126
• /
• 1999

In order to degrade chitin by enzymatic hydrolysis, it is required from screening highly active deacetylase. To this end, we examined three fungal strains and it turned out that Mucor rouxii produced highly active deacetylase, this enzyme exhibited the highest enzymatic activity against colloidal chitin. The conditions for growing Mucor rouxii are as follows; the effective carbon source, nitrogen source, adequate initial pH, temperature and incubation time were $2\%$ glucose, $1.33\%$ yeast extract, $0.66\%$ pepton, 4.5, $25{\pm}2^{\circ}C$ and 48hr, respectively. The optimum pH and temperature for purified enzyme activity were 5.5 and $40^{\circ}C$, respectively. The purified enzyme was stable at pH ranging from 4.5 to 5.5. However, the enzyme activity was decreased to less than $50\%$ at pH blow 45 and above 7.5. At temperatures above $50^{\circ}C$, the enzyme activity was decreased remarkably. The enzyme was inhibited by LiC1, $HgCl_2$, and $BaCl_2$, but stimulated by $CaCl_2$ and $ZnC1_2$, The activity of purified enzyme was increased by L-cysteine and 2-mercaptoethanol, while decreased by O-phenanthroline, p-CMB, EDTA, and iodoacetate. The $K_m$ and the $V_{max}$ value of purified enzyme were $1.2\%$ and 59.5 U/mg, respectively. The deacetylation activity of purified enzyme was not detected at optimal reaction condition when chitin particle suspension was used.