• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.7
• /
• pp.532-538
• /
• 2003

This paper studies on the noise reduction for a small automobile DC Motor (a window motor) using the 6 sigma process. The application of 6 sigma process suggested reliable and valuable statistical data for the quality of the DC motor at the production line. In the measurement step in 6 sigma process. the FMEA(failure mode effect analysis) were used for the detection of noise sources. The application of 6 sigma Process gave not only the improving method for the quality of the DC motor but also the confidence of improvement Itself since it was done on the basis of the test results for a number of DC motors at the production line. Consequently the 6 sigma process was proved very effective for the noise reduction at the production line.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.1
• /
• pp.87-100
• /
• 2005

This paper studies on the quality problem for the Reley using the 6 sigma process. The application of 6 sigma process suggested reliable and valuable statistical data for the quality of the Relay at the production line. In the measurement step in 6 sigma process, the FMEA(filure mode effect analysis) were used for the detection of problem source. The application of 6 sigma process gave the improving method for the quality of the Relay. Consequently the 6 sigma process was proved very effective for the quality problem reducing at the production line.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.322-330
• /
• 2007

Because 6sigma is doing innovative success In management whole, estimate that can exert direct effect in interior Design management. Therefore, this study did by purpose that 6sigma that is scientific method that do customers satisfaction by ultimate purpose acts as basic study that can heighten practical use Possibility and result of interior Design management and value by interior design standardization process. Need to use marketing data that is scientific design component at schematic design step for successful interior design that can improve result. Hereupon, this study is doing to big dimension that utilizes 6sigma and makes standard process of only Interior Design, and did to dimension that present study phase verifies if '6sigma' is practical use possibility by intoner design process. Did by method that verification method of 6sigma practical use possibility analyzes "Information transmission efficiency improvement of department store display space" 6sigma project example. When see that example project is analyzed on Improvement constituent that "Design improvement" out of Vital few Xs of statistical analysis item must heighten the customers satisfaction rate conclusively, target process might be established because design becomes center of gravity if did design improvement very first time. Finally, possibility that 6sigma can utilize in process of interior design is verified, and it is scientific methodology that can utilize to all business members that there are not any special category of business even if is in practical use. Such scientific 6sigma method need persistent study that make standard process analyzing a lot of problems that is expected to be beaconed and happens substantially in here after to management development of interior design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.509-514
• /
• 2002

This paper studies on the noise reduction for a small automobile DC Motor (a window motor) using the 6 sigma process. The application of 6 sigma process suggested reliable and valuable statistical data for the quality of the DC motor at the production line. In the measurement step in 6 sigma process, the FMEA(Failure Mode Effect Analysis) were used for the detection of noise sources. The application of 6 sigma process gave not only the improving method for the quality of the DC motor but also the confidence of improvement itself since it was done on the basis of the test results for a number of DC motors at the production line. Consequently the 6 sigma process was proved very effective for the noise reduction at the production line.

• Journal of Korean Society for Quality Management
• /
• v.35 no.2
• /
• pp.84-98
• /
• 2007

Six Sigma advocates rigorous application of quality management tool. Using Six Sigma program provides a mechanism for service organization to achieve organization's goal and customer satisfaction. A model on Six sigma in service organization was developed and applied for the service organization. Questionnaire was developed, and data was collected and analyzed for this study. Conclusively, 6 sigma leadership is the important drivers to process management and customer relationship management. Process management and customer relationship management are significantly related to the job performance and customer satisfaction.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.211-216
• /
• 2004

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through DFSS methodology research and analysis.

• Journal of Korean Society for Quality Management
• /
• v.32 no.4
• /
• pp.140-155
• /
• 2004

Six Sigma Management has been introduced as a management strategy by leading companies and some small and medium-sized companies in Korea. But it is not easy for small and medium-sized companies to implement this new management system because of their business environment such as poor manpower or lack of time, etc. This paper proposes an effective implementation model of the Six Sigma Management for small and medium-sized companies using the management by process. First, We review the concept of Six Sigma Management and consider the problems of introducing the system for small and medium-sized companies. And then, Six Sigma Management model for small and medium-sized companies named SIX SIGMA-s is presented. Finally, we present a case study of applying SIX SIGMA-s for a medium- sized company.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.04a
• /
• pp.431-436
• /
• 2006

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally. But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through Lean DFSS methodology research and analysis.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.1
• /
• pp.88-100
• /
• 2010

As the competition between companies are deepened, the number of companies adopting six sigma principles, which is one of the innovative management strategies, are increasing. According to this trend, the changes in both strategies and methodologies of six sigma are continuous. However, the evaluations and the management principles included in the process after the six sigma applications are insufficient, and the cooperation between the parties in the company is also not enough because the application process of six sigma is too complex and not efficient. In order to solve this problem, a research for developing the methodology which can learn about and do six sigma applications is so necessary, specifically for expanding the six sigma applications and introducing the participation of all company members. The purpose of this study, therefore, was to develop and present more efficient Six Sigma applied process by reducing the existing unnecessary steps in improvement one, by applying the examination method of wasteful elements on the potential factors, through analyzing the Six Sigma DMAIC applied case in the construction industry. The result of those application showed that the detection of potential factors using wasting elements was possible in measurement step and that it was possible for the improved process with reduced steps compared to existing process while to remain the outcomes. It is considered that the performance rate of Six Sigma project will be improved significantly because the reduction in the improvement step does not affect the improvement effect within the whole Six Sigma project.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.1-6
• /
• 2003

This study deals with the problem of selecting 6 sigma projects. Traditionally, such selection was based on CTQ (critical to quality) or COPQ (cost of poor quality) derived within business units. Since the objective of 6 sigma is to achieve business goals in a short period, 6 sigma projects should be selected and carried out in coincidence with the whole company's strategies. This paper proposes two methods of selecting 6 sigma projects: one is to identify CTQ's by analyzing the company's BSC's (balanced score card) and then deploying them into subunits of the company and the other is to identify those projects with large hidden COPQ or cost of waste by applying value stream analysis and process model simulation to derive process cost models.