• 한국운동역학회지
• /
• 제15권3호
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• 한국전산구조공학회논문집
• /
• 제25권5호
• /
• pp.455-463
• /
• 2012

본 연구에서는 부유식 해상 풍력 발전기의 로터 축과 타워 상단에 작용하는 동적 하중을 계산하였다. 부유식 해상 풍력 발전기는 부유식 플랫폼, 타워, 낫셀, 허브, 그리고 3개의 블레이드로 구성되어 있는 다물체계 시스템이다. 본 연구에서는 이들 모두를 각각 6 자유도를 갖는 강체로 가정하였다. 부유식 해상 풍력 발전기의 타워는 플랫폼에 고정되어 있고, 3개의 블레이드는 허브에 고정되어 있다. 낫셀은 타워의 상부에 회전 관절로 연결되어 있으며, 블레이드와 허브로 구성된 로터는 낫셀과 회전 관절로 연결되어 있다. 본 연구에서 부유식 풍력 발전기의 운동 방정식은 다물체계 동역학을 기반으로 한 운동방정식 구성 방법 중 하나인 recursive formulation을 이용하여 구성하였다. 외력으로는 부유식 플랫폼에 작용하는 비선형 유체 정역학 힘과 선형 유체 동역학적 힘 그리고 계류력을 고려하였고, 블레이드에 작용하는 풍력을 고려하였다. 이와 같이 구성한 운동 방정식을 해를 구하여 풍력 발전기를 구성하고 있는 각 요소들의 각 연결 부위에 작용하고 있는 구속력을 계산하였다. 그 결과, 동적 상태에서 풍력 발전기에 작용하는 하중은 정적 상태에서 풍력 발전기에 작용하는 하중보다 큰 것을 알 수 있으며, 따라서 부유식 풍력 발전기의 구조해석의 입력 값으로서 정적 하중보다 동적 하중을 고려하는 것이 더 엄격한 해석 기준이라고 할 수 있다.