• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.590-593
• /
• 2011

Purpose: Surgical site infections (SSIs) are the third most frequently reported nosocomial infection. Of these SSIs, mostly were confined to the incision associated with underlying disease as diabetes, cigarette smoking, systemic steroid use, obesity, operating room environment, suture and surgical technique. This study has been planned to reduce the SSIs by using Vicryl $plus^{(R)}$ (Ethicon, USA) which contains triclosan, a broad-spectrum antibacterial agent, into the infected wound to evaluate whether or not Vicryl $plus^{(R)}$ (Ethicon, USA) is effective to nosocomial bacteria using a zone of inhibition assay. Methods: We did a comparison of Vicryl $plus^{(R)}$ suture (with triclosan) size 2-0, 5-0 with $Vicryl^{(R)}$ suture (without triclosan) size 4-0 each as treatment and control group, applied in Mueller-Hinton agar infected by following mircroorganisms: Methicillin-sensitive $Staphylococcus$ $aureus$ (MSSA), Methicillin-resistant $Staphylococcus$ $aureus$ (MRSA), Acinetobacter baumanii, $Escherichia$ $coli$, Enterobacter faecalis, Pseudomonas aeruginosa, Candida albicans. Cultures were made of the selected mircroorganisms, seeding the study strain in agar plates for 24 and 48-hour period in an oven at $37^{\circ}C$ followed by zone of inhibition assay. Results: Vicryl $plus^{(R)}$ group has demonstrated to create a zone of inhibition against MRSA, MSSA and $A.$ $baumanii$, but no effect on $E.$ $faecalis$, $P.$ $aeruginosa$, $C.$ $albicans$. Vicryl $plus^{(R)}$ suture size 2-0 also had antibactericidal effect while Vicryl $plus^{(R)}$ suture size 5-0 did not. $Vicryl^{(R)}$ group had no zones of inhibition showing colonization at all mircroorganisms. Conclusion: Our results seem to warrant the use of Vicryl $plus^{(R)}$ as absorbable buried suture when concerning SSIs as a prophylaxis against surgical nosocomial infection.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.201-208
• /
• 2008

Ceria ($CeO_2$) becomes one of important functional nanomaterials and a key abrasive material for chemical-mechanical planarization (CMP) of advanced integrated circuits in silicon semi-conductor technology. Two synthetic crystalline ceria (RT735, RT835) are studied by the Rietveld structural refinement to determine crystallite size and microstrain. Rietveld indices of RT735 and RT835 indicate good fitting with $R_p(%)=8.50$, 8.34; $R_{wp}(%)=13.4$, 13.5; $R_{exp}(%)=11.3$, 11.5; $R_B(%)=2.21$, 2.36; S(GofF: Goodness of fit)=1.2, 1.2, respectively. $CeO_2$ with space group Fm3m show a=5.41074(2), 5.41130(6) ${\AA}$, V=158.406(1), 158.455(3)${\AA}^3$ in dimension. Detailed Rietveld refinement reveals that crystallite size and microstrain are 37.42(1) nm, 0.0026 (RT735) and 72.80(2) nm, 0.0013 (RT835), respectively. It also shows that crystallite size and microstrain of ceria are inversely proportional to each other.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.21-27
• /
• 2019

R-404A, which is used widely in small-scale ice makers, is scheduled to be phased out because of its high global warming potential. In this study, drop-in tests were conducted using R-448A and R-449A, which replace R-404A, to modify the outdoor air and supply water temperatures. The results showed that the daily ice production rate of R-404A was 5.3% higher than that of R-448A and 4.2% higher than that of R-449A. This was attributed to the larger vapor density of R-404A, which resulted in a larger mass flow rate in the system. Between R-448A and R-449A, R-448A yielded a larger amount of ice at low air and water temperatures, whereas R-449A yielded a larger amount of ice at high air and water temperatures. The daily power consumption of R-404A was approximately 10% larger than those of R-448A and R-449A. The resulting COPs of R-448A and R-449A was similar, only 3.0% larger than that of R-404A. The literature survey showed that the condensation or evaporation data of R-448A or R-449A are very limited, and research on this issue is recommended.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.215-222
• /
• 1999

Platycodon root contains abundant pharmaceutical substances and is widely used as a food and a medicinal herb. This study was conducted to determine the cultural environment and soil morphological characteristics of platycodon. Sampling sites were Keochang 4, Kimhae 7, Haman 6, Chinju 6 and Koseong 3 fields in Kyongnam province and Hongcheong 6 fields in Kangwon province. The average continious cropping year was highest Chinju 8.0-years old, whereas lowest Hongcheon 2.3-years old. The average cropping area and compost application were highest Hongcheon 1.3ha and $108Mg\;ha^{-1}$ respectively than other areas. The slope was in order to Koseong steep slope with 35%. Koechang 28%, Flaman 16%, Chinju 11.7%, Kimhae 11% and Hongcheon 7.5%. The drainage classes was well drained in Koechang. Kimhae, Chinju and Koseong, while it s poorly drained in Hongcheon and Haman. Distribution of topography was highest rolling 37.9% and drainage classes was highest well drained 48.3%. The root disease incidence rate was in the order of Haman 56.8%, Hongcheon 52.5%, Kimhae 36.7%, Koechang 35.3%, Chinju 32.3% and Koseong 30.0%. The yield at the Chinju $36.17Mg\;ha^{-1}$ was higher than that of Koseong $25.00Mg\;ha^{-1}$, Kimhae $13.57Mg\;ha^{-1}$, Koechang $11.75Mg\;ha^{-1}$, Haman $9.50Mg\;ha^{-1}$ and Hongcheon $5.24Mg\;ha^{-1}$. The average temperature was correlated with the disease incidence rate by $Y=3.07X^2-87.16X+649.26(R^2=0.947^{**})$ and yield by $Y=-478.68X^2+13403X-90836(R^2=0.763^*)$. The root disease incidence rate was correlated with drainage classes Y=19.1X-5.26($R^2=0.592{***}$), topography Y=9.68X+10.77($R^2=0.205^{**}$) and slope Y=0.85X+-27.88 ($R^2=0.143^*$). The yield was correlated with drainage classes Y=-10X+42($R^2=0.348^{**}$), topography Y=-5.34X+34.5 ($R^2=0.134^*$) and slope Y=-0.68X+25.48($R^2=0.129^*$). The optimum cultivated land of perennial platycodon was average temperature $14^{\circ}C$, direction of southeast, topography of flat or undulating, slope of 0-6%, well drained.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.173-178
• /
• 1984

Correlation study was conducted to establish the optimum test level of soil improvement for good growth of corn from the relationships between the corn yield and soil chemical properties in 16 farmers' demonstration fields. Significant positive correlations between the corn yield and soil chemical properties ; pH, available phosphorus, exchangeable potassium, calcium, magnesium, cation exchange capacity. available silica, and base saturation percentage were showed but organic matter and nitrogen content were not. The proper nutrient contents in soil for expecting corn yield, 1.000kg/10a could be estimated as pH 5.6, available phosphorus 327ppm, exchangeable potassium 0.39me/100g, exchangeable calcium 5.5me/100g, exchangeable magnesium 1.3me/100g, cation exchange capacity 11.5me/100g, available silica 116ppm, base saturation percentage 58 from the relationships between the corn yield and soil chemical properties. Exchangeable aluminium were negatively correlated with not only corn yield but also pH, available phosphorus, exchangeable potassium and exchangeable calcium.

• Journal of the Korean Chemical Society
• /
• v.67 no.3
• /
• pp.191-198
• /
• 2023

Acyl transfer reactions of 2,4-dinitrophenyl-5-substituted-2-furoates (1a-d) promoted by R₂NH/R₂NH₂⁺ in 20mol% DMSO(aq) have been studied kinetically. The reactions are second-order and exhibit downward curves of the Brönsted plots with pK_a⁰ = 9.5, β₁ = 0.23-0.35 and β₂ = 0.88-0.99. The k₁ values increased with a stronger nucleophile and as the electron-withdrawing ability of the 5-furyl substituent increases. In contrast, the k₂/k_-1 values were nearly idential regardless of the 5-furyl substituents. From these results, a stepwise mechanism with a change in the rate-determining step(RDS) is proposed.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.3
• /
• pp.181-190
• /
• 2004

We use BV CCD images to study the dynamical substructure of the globular cluster M5. We investigate the radial variation of ellipticities and position angles using the stellar photometry and the IRAF ellipse task. We find that out to three times the half light radius $(r_h)$, the changes in ellipticities and position angles range in $0.05\~0.25$ and $75^{\circ}\~-75^{\circ}$, respectively. There are no significant discrepancy in the dynamical substructure beyond $r_h$ among the different giant populations. However, compared to the global dynamical substructure of M5, the inner $(<0.5r_h)$ substructure of the bright red giant and the horizontal branch populations show slightly different patterns. Especially, the discrepancy of the bright red giant population with respect to the global substructure, ranges up to 0.1 for the ellipticity and 1000 for the position angle.

• Journal of the Korean Mathematical Society
• /
• v.42 no.5
• /
• pp.933-948
• /
• 2005

Let R be a commutative ring with identity and let M be an R-module. Then M is called a multiplication module if for every submodule N of M there exists an ideal I of R such that N = 1M. Let M be a non-zero multiplication R-module. Then we prove the following: (1) there exists a bijection: N(M)$\bigcap$V(ann$\_{R}$(M))$\rightarrow$Spec$\_{R}$(M) and in particular, there exists a bijection: N(M)$\bigcap$Max(R)$\rightarrow$Max$\_{R}$(M), (2) N(M) $\bigcap$ V(ann$\_{R}$(M)) = Supp(M) $\bigcap$ V(ann$\_{R}$(M)), and (3) for every ideal I of R, The ideal $\theta$(M) = $\sum$$\_{m(Rm :R M) of R has proved useful in studying multiplication modules. We generalize this ideal to prove the following result: Let R be a commutative ring with identity, P $\in$ Spec(R), and M a non-zero R-module satisfying (1) M is a finitely generated multiplication module, (2) PM is a multiplication module, and (3) P$^{n}$M$\neq$P$^{n+1}$ for every positive integer n, then $\bigcap$$^{$\_{n=1}$(P$^{n}$ + ann$\_{R}$(M)) $\in$ V(ann$\_{R}$(M)) = Supp(M) $\subseteq$ N(M).

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.718-725
• /
• 2002

A wall type friction damper is newly Proposed in this paper to improve the performance of R/C framed structures under earthquake loads. Although traditional dampers are usually placed as bracing members, the application ot bracing-type dampers into R/C structures is not as simple as those of steel structures due to the connection between R/C members and dampers and the stress concentration in connection region. Proposed damper is consisted of Teflon-sheet slider and R/C shear wall. The damper can also avoid stress concentration and reduce P-Δ effect. To evaluate the performance of proposed damper, nonlinear dynamic analyses are carried on 10 story and 3 bay R/C structures with numerical model for the damper. It is shown that the damper reduces the inter-story drifts and the time-historic responses; especially the damper prevents from forming plastic hinges on the lower columns.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.11
• /
• pp.450-457
• /
• 2016

While many studies on the heat transfer effect of an impinging jet have been published, most studies focus on the downward impinging jet. This study investigates the impinging jet heat transfer phenomenon when water at a temperature of $24^{\circ}C$ impinges on the downward isothermal circular plate at 60, 70, and $80^{\circ}C$ and when the upward round jet nozzle is 4, 6, and 8 mm diameter with a flow rate 3.6, 4.6, and 5.6 L/min, respectively, and when the ratio of the nozzle clearance/nozzle diameter (H/D) is 1. The results showed that, as the nozzle diameter decreases, the heat transfer coefficient increases at a constant flow rate. The correlation equation of $Nu_r$, $Pr_r$, and $Re_{jg}$ is obtained in the impinging and constant velocity flow region $(Nu_r/Pr^{0.4}_r)Dr=4.6[Re_{jg}(r/R_c)Dr]^{0.8}$ at all flow rates, in the deceleration and falling flow regions $(Nu_r/Pr^{0.4}_r)Dr=42.7{\mid}Re_{jg}(r/R_c)Dr-345.7{\mid}^{0.3}$ at 3.6 L/min, $(Nu_r/Pr^{0.4}_r)Dr=92.4{\mid}Re_{jg}(r/R_c)Dr-16.8{\mid}^{0.2}$ at 4.6 L/min, and $(Nu_r/Pr^{0.4}_r)Dr=322.4{\mid}Re_{jg}(r/R_c)Dr-536.2{\mid}^{0.01}$ at 5.6 L/min.