• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.92-96
• /
• 2012

This paper presents return link demodulation algorithm designed for hardware implementation using HDL that include complex signal processing work reliably even in low SNR. Simulation results show that performance of Es/$N_0$ has improved within 0.5dB at the point of uncoded BER $10^{-3}$ compared to the ideal QPSK signal. In addition, fixed-point simulation and HDL implementation performance compared to the simulation we can see that there is no difference.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4678-4684
• /
• 2023

Using the Monte Carlo method, the impact of the angular distribution of the electron source on the dose distribution for the 2.5 MeV ELV electron accelerator was explored. The experiment measured the 3-D dose distribution in the irradiation chamber for electron energies of 1.0 MeV and 2.5 MeV. The simulation used the MCNP6.2 code to evaluate three angular distribution models of the source: a mono-directional beam, a cone shape, and a triangular shape. Of the three models, the triangular shape with angles θ = 30°, φ = 0° best represents the angle of the scan hood through which the electron beam exits. The MCNP6.2 simulation results demonstrated that the triangular model is the most accurate representation of the angular distribution of the electron source for the 2.5 MeV ELV electron accelerator.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.298-304
• /
• 2012

The shielded slot plates for a molten carbonate fuel cell(MCFC) have a sheared corrugated trapezoidal pattern. In the FEM simulations for the production of the shielded slot plate, the user material subroutine VUMAT in the commercial FEM software ABAQUS was used to implement a ductile fracture criterion. The critical damage value for the ductile fracture criterion was determined by comparing the experimental results of the shearing process with the simulation results. Using the ductile fracture criterion, the FEM simulation of the three-dimensional forming process of the shielded slot plate was conducted. The effects of the shearing process on the forming process were examined through FEM simulation and experiments. The forming simulation of nine unit cells was conducted. Using the simulation results of the forming process, the deformed shape after springback was calculated. The experimental result shows good agreement with the simulation.

• The Research Journal of the Costume Culture
• /
• v.26 no.5
• /
• pp.727-743
• /
• 2018

In this study, we used the 3D simulation program to create bodice patterns for adolescents boy students and analyze the fitting and air gap through 3D simulation. The purpose of this study was to select the bodice pattern method that best suited the body shapes of the adolescents male students. The subjects of this study were the French E pattern, Japanese N pattern, and Korean industrial L and J patterns. The applied size was the sixth Korean human body size survey data of 2010 Korea. The age range of the subjects was 13-18 years. DC Suite Program Ver. 5.1 was used, and SPSS 23.0 program was used for data analysis. As a result of comparing the shapes of the bodice patterns in the 3D simulation program, the E pattern had two waist darts on the front and one shoulder dart and one waist dart on the back, and the J and L patterns only had one dart on the back. The N pattern had no darts on either the front or back. As a result of examining the appearance evaluation of the pattern, air gap, color distribution, and clothing cross-section, the E pattern was evaluated as the closest to the body, and the N pattern was evaluated as the pattern with the largest allowance. The J pattern was evaluated as the best fit for body shape of the male adolescents. However, it is necessary to develop a pattern system by adding extra ease in setting the center front length.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.488-494
• /
• 2023

In this paper, scenario-based urban flood prediction for the entire Jinju city was performed, and a simulation domain was constructed using G2D as a 2-dimensional urban flood analysis model. The domain configuration is DEM, and the land cover map is used to set the roughness coefficient for each grid. The input data of the model are water level, water depth and flow rate. In the simulation of the built G2D model, virtual rainfall (3 mm/10 min rainfall given to all grids for 5 hours) and virtual flow were applied. And, a GPU acceleration technique was applied to determine whether to run the flood analysis model in the target area. As a result of the simulation, it was confirmed that the high-resolution flood analysis time was significantly shortened and the flood depth for visual flood judgment could be created for each simulation time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.422-429
• /
• 2006

Resolved simulations are presented fur gravity current flows aiming at studying their spreading rate. The simulations are performed for two extreme configurations such as planar and cylindrical and for 3 different Grashof numbers: $10^5,\;1{\times}10^6\;and\;10^7$. Varying the size of the heavy fluid release, the study is performed for several phases of spreading, namely acceleration, slumping and inertial phases. For the simulations, efficient spectral multi-domain code is used. From the simulations results it is concluded that 2-D results predicts well the mean front velocity during the slumping phase, but fails to predict it during the inertial phase of spreading. It is also observed that the vortex dynamics of the flow is not reproduced well by the 2-D simulation.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.607-613
• /
• 2012

This study develops a Hanbok Jeogori pattern for middle-aged women with a 3D virtual-twin and virtual-garment simulation system. The including criteria for subjects in this study was a focus on women in their 50s, and a total of 345 females satisfying them were enrolled for 3D virtual model. Comparative Jeogori pattern, Baik & Choi's(2004) pattern, was selected for the development of Jeogori pattern. The results were: first, a new Jeogori pattern considerate of middle-aged women was developed. The basic numerical formula were: Front and back bust girth B/4+1.5, armhole depth B/4, sleeve width B/4, goedae width B/10-1.5 and git width 5.5. Second, according to the results of the new Jeogori patterns appearance evaluation, the new Jeogori pattern scored higher than the existing pattern in silhouette and ease amount, this confirmed that the new Jeogori pattern is appropriate for middle-aged women. Virtual models of production through data from 3D body scan, pattern draft, and virtual garment digital program were applied to a prototypic design method to enhance the fitness of ready-made Hanbok garments. This study serves as important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns and for the future 3D Pattern Production Program development of Hanbok patterns.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.805-812
• /
• 2014

This study investigates the impact of morphological change on the physical habitat simulation. For this, CCHE2D model is used for the hydraulic analysis including the morphological change, and the physical habitat suitability is assessed with habitat suitability curves. The model is applied to a 2.5km long reach downstream of the Goesan Dam, from Sujeon Bridge to Daesu Weir. Flow data of discharge and stage in July, 2006 are used in the computation. The numerical model is verified by means of comparison with the measured water surface elevation data, and the variation of the river bed is not verified in this study. Adult Zacco platypus is chosen for the dominant species. Physical habitat simulations result in composite habitat suitability and weighted usable area for drought, low, normal, and averaged-wet flows. The simulation results indicate that the composite suitability index increased at reaches right downstream of the Sujeon Bridge and around the bend. This also increased weighted usable area by 5.4-11.3%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.228-238
• /
• 2002

Using the dynamic explicit program NET3D, oblique impact between long rod penetrator and metallic plate was analyzed. Compared with an experiment and AUTODYN-3D analysis result, the accuracy of NET3D program was examined. It was proved that NET3D program could analyze comparatively exactly oblique impact phenomenon between long rod penetrator and metallic plate. The final deformed configuration of penetrator predicted by NET3D program was more close to experimental result than commercial program AUTODYN-3D. But, in order to increase the reliability of NET3D program in the simulation of tensile fracture phenomenon, the additional research is required.

• Korean System Dynamics Review
• /
• v.5 no.2
• /
• pp.125-147
• /
• 2004

System dynamics model has been developed and computer simulation has been peformed for the evaluation of R&D policy. One of the main results of the basecase scenario is as follows. After simulation of nuclear R&D resource allocation strategies, we discovered that their net benefit value was maximum at 130% nuclear R&D budget case. And after simulation of human resource management strategies and policy research program strategies, we confirmed that it is beneficial to allocate budgets in the early phase for human resources management program and research program for the policy.