• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.135-147
• /
• 2018

The objective of this study was to analyze the characteristics of combined 1D/2D inundation simulation of riverside farmland using the Hydrologic Engineering Center - River Analysis System (HEC-RAS). We compared and analyzed inundation simulation results between 1D and combined 1D/2D hydraulic simulation using HEC-RAS. Calibration and validation of stream stage were performed using three rainfall events. The coefficient of determination ($R^2$) and root mean square error (RMSE) between simulated and observed stream stage were 0.935 - 0.957 and 0.250 m - 0.283 m in calibration and validation, respectively. The inundation area showed no significant difference in 1D and combined 1D/2D simulation ($8.48km^2$ in 1D simulation, $8.75km^2$ in combined 1D/2D simulation). The average inundation depth by 1D simulation was 1.4 m deeper than combined 1D/2D simulation. In the lower inundation depth, the inundation area by combined 1D/2D simulation was larger than inundation area by 1D simulation. As the inundation depth increased, the inundation area by 1D simulation became wider. In the case of the 1D/2D combined simulation, low elevation areas along the river bank were inundated widely. Compared to 1D/2D combined simulation, the flood radius in some sections was longer in 1D simulation. In the 1D analysis, because the low altitude riverside farmlands are also assumed to stream, it is calculated that riverside farmlands have the same stage as the mainstream when the stream is overflowed. Therefore, the inundation area seems to be overestimated in those sections. In other regions, the inundation areas tend to be broken depending on overflow by each stream cross-section. In the case of river flooding, the overflow is expected to flow to the lower area depending on the terrain, such as the results of the combined 1D/2D simulation. It is concluded that the results of combined 1D/2D inundation simulation reflected the topographical characteristics of low-lying farmland.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.15-26
• /
• 2019

In recent years, researchers are increasingly trying to use BIM-based 3D models for BIM nD design such as 4D (3D + Time) and 5D (4D + Cost). However, there are still many problems in efficiently using process management based on the BIM information created at each design stage. Therefore, this study proposes a method to automate 4D and 5D design support in each design stage by using BIM-based Dynamo algorithm. To do this, I implemented an algorithm that can automatically input the process information needed for 4D and 5D by using Revit's Add-in program, Dynamo. In order to support the 4D design, the algorithm was created to enable automatic process simulation by synchronizing process simulation information (Excel file) through the Navisworks program, BIM software. The algorithm was created to automatically enable process simulation. And to support the 5D design, the algorithm was developed to enable automatic extraction of the information needed for mass production from the BIM model by utilizing the dynamo algorithm. Therefore, in order to verify the 4D and 5D design support algorithms, we verified the applicability through consultation with related workers and experts. As a result, it has been demonstrated that it is possible to manage information about process information and to quickly extract information from design and design changes. In addition, BIM data can be used to manage and input the necessary process information in 4D and 5D, which is advantageous for shortening construction time and cost. This study will make it easy to improve design quality and manage design information, and will be the foundation for future building automation research.

• The Research Journal of the Costume Culture
• /
• v.23 no.4
• /
• pp.616-627
• /
• 2015

The purpose of this study was to develop slacks patterns for obese-schoolgirls aged 10~12 by using a 3D virtual garment simulation system. The criteria for subjects in this study were girls who had a BMI of over $25kg/m^2$. A total of 155 schoolgirls who met these criteria were enrolled. The results were as follows: First, by using 3D virtual garment simulation, a new slacks pattern considerate of obese-schoolgirls was developed. The basic numerical formulae were as follows: Front and back hip girth of H/4-0.5+1 and H/4+0.5+1.5, front waist girth of W/4+1+0.5, back waist girth of W/4+2+0.5, front crotch extension of H/16-0.5, back crotch extension of H/8-0.5, front dart amount of 1, and back dart amount of 2. Second, according to the new slacks pattern appearance evaluation, the new slacks pattern scored more highly than the existing pattern for silhouette and ease amount, confirming that the new slacks pattern is appropriate for obese-schoolgirls. Additionally, the new slacks pattern was evaluated allowing for the proper space length of the waist, abdomen and hips. This study is expected to serve as important basic data for ensuing studies that may utilize a 3D virtual garment simulation system with 2D patterns and for future 3D pattern production program development.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.86-93
• /
• 2010

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• Journal of Korea Multimedia Society
• /
• v.24 no.5
• /
• pp.629-641
• /
• 2021

Crowd behavior simulations have been studied to further accelerated and refined by parallelism by inducing agent-interacting forces into the image field representing the forces of attraction and repulsion. However, it was difficult to consider rapidly changing environments such as fire situations in buildings because texture images must be generated in advance simulation starts and simulations can only be performed in 2D spaces. In this paper, we propose a crowd agent behavior simulation method based on agent's 3D affordance field for flexible agent behavior in variable geomorphological environments in 3D space. The proposed method generates 3D affordance field related to agents and sensors in 3D space and defines the agent behavior in 3D space for the crowd behavior simulation based on an image-inducing field to a 3D space. Experimental results verified that our method enables the development of large-scale crowd behavior simulations that are flexible to various fire evacuation situations in 3D virtual spaces.

• Journal of the Korea Society for Simulation
• /
• v.5 no.2
• /
• pp.41-58
• /
• 1996

The Discrete Event Systems Specification(DEVS) formalism specifies a discrete event system in a hierarchical, modular form. This paper presents a distributed simulation environment D-DEVSim++ for models specified by the DEVS formalism. D-DEVSim++ employs a new simulation scheme which is a hybrid algorithm of the hierarchical simulation and Time Warp mechanisms. The scheme can utilize both the hierarchical scheduling parallelism and the inherent parallelism of DEVS models. This hierarchical scheduling parallelism is investigated through analysis. Performance of the proposed methodology is evaluated through benchmark simulation on a 5-dimensional hypercube parallel machine. The performance results indicate that the methodology can achieve significant speedup. Also, it is shown that the analyzed speedup for the hierarchical scheduling time corresponds the experiment.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.497-506
• /
• 2008

The needs for digital models of real environment such as 3D terrain or cyber city model are increasing. Most of applications related with modeling and simulation require virtual environment constructed from geospatial information of real world in order to guarantee reliability and accuracy of the simulation. The most fundamental data for building virtual environment, terrain elevation and orthogonal imagery is acquired from optical sensor of satellite or airplane. Providing interoperable and reusable digital model is important to promote practical application of high-resolution satellite imagery. This paper presents the new research regarding representation of geospatial information, especially for 3D shape and appearance of virtual terrain. and describe framework for constructing real-time 3D model of large terrain based on high-resolution satellite imagery. It provides infrastructure of 3D simulation with geographical context. Web architecture, XML language and open protocols to build a standard based 3D terrain are presented. Details of standard-based approach for providing infrastructure of real-time 3D simulation using high-resolution satellite imagery are also presented. This work would facilitate interchange and interoperability across diverse systems and be usable by governments, industry scientists and general public.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.963-970
• /
• 2013

The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.29-37
• /
• 2009

Recently, the structure of simulation environment is important issue in all fields. In case of the training for operating the machines which are costly such as airplanes or spaceships, simulators could be helpful for decreasing the costs and training effects by simulating real situation. When we get the driving license, too many peoples are waiting for their turns because of limited cars and testing spaces in Korea. To solve this problem, we've designed and developed the basic design for the simulators. We suggested the Computer 3D Simulation Model for practice of a drives's license. The concept of this simulator was from a 3D Racing-game which suit for driving exercise. We provide users with handle-controlled simulation setting in order that users feel reality as if they drive really through this simulator. We also use 'force-feedback' system which give handle vibration in case users collide against obstacles or exceed the line since users can absorb the simulation program and feel the sense for the real. This paper is the study about modeling the driving exercise model made use of 'computer 3D simulation', and producing and utilizing the simulator through this modeling.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.347-353
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a suitable basic bodice pattern of Male Sports Athletes by using the 3D virtual twin and virtual garment simulation system. The results were as follows; 1. By using 3D virtual twin and garment simulation, new bodice pattern considered male sports athletes was development. The basic numerical formula were as follows ; surplus of chest girth=9, surplus of back length=1, armhole depth=back length/4+13, half back width=chest girth/5+2.5, front chest width=chest girth/5+3. 2. Wearing test by 3D virtual garment simulation system was useful to evaluate wearing outline, surplus of clothes and garment space. Also it estimated more highly than existing pattern in silhouette and ease amount, confirming that new bodice pattern is appropriate for the male sports athletes. New bodice pattern was evaluated to allow proper space length of chest and waist. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.