• 한국통신학회논문지
• /
• 제36권10B호
• /
• pp.1150-1158
• /
• 2011

UBcN에서는 한 가입자가 UDTV나 3DTV와 같은 광대역 신호를 동시에 다수의 채널로 수신할 수 있게 하기 위하여 100 Mbps를 초과하는 전송률을 요구하고 있다. 최근에 FTTH를 위한 매체로서 댁내 일부에 광케이블을 사용하기 시작했지만, UTP는 여전히 가장 많이 사용되는 매체이고 UBcN 시대에도 널리 사용될 것이다. UBcN을 위해 광케이블이 포설되지 않은 곳에 UTP를 적용해야 한다면 현재로서는 1000BASE-T나 Vectorized VDSL2를 고려할 수 있다. 그러나 대부분의 가입자 댁내에는 2조 이하의 UTP가 포설되어 있으므로 4조의 UTP를 사용해야 하는 1000BASE-T나 3조의 UTP를 사용하는 Vectorized VDSL2를 적용하기 위해서는 추가적으로 UTP를 증설해야 한다. 이러한 문제를 해결하기 위하여 본 논문에서는 2조 UTP를 통하여 500 Mbps를 제공하는 500BASE-T 기술을 제안한다. 이 기술의 특징은 현존하는 1000BASE-T의 규격에서 PCS 상부에 속도 정합을 위한 부계층과 PCS 하부에 SERDES 부계층을 추가하여 구현된다. 속도 정합계층은 기존의 GMII와 호환이 되도록 하기 위한 것이다. 그리고 SERDES 부계층을 약간 수정하면 500 Mbps의 2조의 UTP를 250 Mbps의 1조 UTP로 용이하게 변경하여 사용할 수 있다. 이러한 기능들을 FPGA와 아날로그 보드를 이용하여 구현하였으며, 실험을 통하여 속도정합, 심벌벡터 동기, 전송률 등을 검증한다. 특히, 속도정함 부계층에서 enable 제어를 통하여 링크 효율을 증가함을 보여준다.

• Bulletin of the Korean Chemical Society
• /
• 제17권11호
• /
• pp.1045-1052
• /
• 1996

The effects of G-T mismatches on thermal stability, the base-pair lifetime and the global structure of a d(GCGTGCGC)2 duplex were studied by using 1H NMR, UV and CD spectroscopy. The existence of G-T mismatches was found to cause a noticeable change in the chemical environment of imino protons associated with significant decrease in the base-pair lifetime at the mismatched site as well as in thermal stability of the duplex itself. The melting transition of d(GCGTGCGC)2 was not cooperative at all at 100 mM or lower concentration of NaCl, but became cooperative at 500 mM or higher NaCl concentration. The melting temperature (Tm) of this duplex was 32℃ at 500 mM concentration of NaCl, which is much lower than that of d(GCGCGCGC)2 at the same NaCl concentration. This suggests that the decrease in stability may be ascribed to the decrease in the base-pair lifetime and the deviation from the normal structure due to the G-T mismatches. Adding berenil to d(GCGTGCGC)2 caused no observable change in the global structure but the large decrease in the base-pair lifetime and the stability of the duplex.

• Korean Journal of Anesthesiology
• /
• 제71권6호
• /
• pp.459-466
• /
• 2018

Background: To compare the effects of intraoperative infusions of balanced electrolyte solution (BES)-based hydroxyethyl starch (HES) and saline-based albumin on metabolic acidosis and acid/base changes during major abdominal surgery conducted using Stewart's approach. Methods: Forty patients, aged 20-65 years, undergoing major abdominal surgery, were randomly assigned to the HES group (n = 20; received 500 ml of BES-based 6% HES 130/0.4) or the albumin group (n = 20; received 500 ml of normal saline-based 5% albumin). Acid-base parameters were measured and calculated using results obtained from arterial blood samples taken after anesthesia induction (T1), 2 hours after surgery commencement (T2), immediately after surgery (T3), and 1 hour after arriving at a postanesthetic care unit (T4). Results: Arterial pH in the HES group was significantly higher than that in the albumin group at T3 ($7.40{\pm}0.04$ vs. $7.38{\pm}0.04$, P = 0.043), and pH values exhibited significant intergroup difference over time (P = 0.002). Arterial pH was significantly lower at T3 and T4 in the HES group and at T2, T3, and T4 in the albumin group than at T1. Apparent strong ion difference (SIDa) was significantly lower at T2, T3, and T4 than at T1 in both groups. Total plasma weak nonvolatile acid ($A_{TOT}$) was significantly lower in the HES group than in the albumin group at T2, T3 and T4 and exhibited a significant intergroup difference over time (P < 0.001). Conclusions: BES-based 6% HES infusion was associated with lower arterial pH values at the end of surgery than saline-based 5% albumin infusion, but neither colloid caused clinically significant metabolic acidosis (defined as an arterial pH < 7.35).

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.371-376
• /
• 2015

Magnetite nanoparticles were synthesized by adding excess ammonium hydroxide to a solution of iron (II) and (III) chlorides. The surfactants of oleic acid and Span 80 were applied in sequence to the magnetic particles as a combined stabilizer, and poly-${\alpha}$-olefin (PAO) 30 or 60 was used as the liquid base with a low or high viscosity, respectively. The ferrofluids were prepared with the concentrations of 200, 300, 400, and 500 mg/mL, and characterized by density, dispersion, magnetization, and viscosity. The density of the fluids increased proportionally to the concentration from 0.98 to 1.27 g/mL and 1.01 to 1.30 g/mL with PAO 30 base and PAO 60 base, and the dispersion stability was 77-95 and 81-74% for the PAO-30 and PAO-60-based fluids, respectively. The observed saturation magnetization values of the PAO-30 and PAO-60-based ferrofluids were 16 to 42 mT and 17 to 41 mT with the concentration increase in the range 200-500 mg/mL, respectively, depending upon the content of magnetic particles in the fluid. The viscosity variation of the PAO-30 and PAO-60-based ferrofluids in the temperature range $20-80^{\circ}C$ was the least with the concentrations of 400 and 300 mg/mL, respectively.

• Genomics & Informatics
• /
• 제21권4호
• /
• pp.49.1-49.11
• /
• 2023

Recent advances in sequencing technologies and platforms have enabled to generate metagenomics sequences using different sequencing platforms. In this study, we analyzed and compared shotgun metagenomic sequences generated by HiSeq3000 and BGISEQ-500 platforms from 12 sediment samples collected across the Norwegian coast. Metagenomics DNA sequences were normalized to an equal number of bases for both platforms and further evaluated by using different taxonomic classifiers, reference databases, and assemblers. Normalized BGISEQ-500 sequences retained more reads and base counts after preprocessing, while a slightly higher fraction of HiSeq3000 sequences were taxonomically classified. Kaiju classified a higher percentage of reads relative to Kraken2 for both platforms, and comparison of reference database for taxonomic classification showed that MAR database outperformed RefSeq. Assembly using MEGAHIT produced longer assemblies and higher total contigs count in majority of HiSeq3000 samples than using metaSPAdes, but the assembly statistics notably improved with unprocessed or normalized reads. Our results indicate that both platforms perform comparably in terms of the percentage of taxonomically classified reads and assembled contig statistics for metagenomics samples. This study provides valuable insights for researchers in selecting an appropriate sequencing platform and bioinformatics pipeline for their metagenomics studies.

• 대한의용생체공학회:의공학회지
• /
• 제17권2호
• /
• pp.235-240
• /
• 1996

The automated ECG diagnostic systems that are odd in hospitals have low performance of P-wave detection when faced with some diseases such as conduction block. So, the purpose of this study was the improvement of detection performance in conduction block which is low in P-wave detection. The first procedure was removal of baseline drift by subtracting the median filtered signal of 0.4 second length from the original signal. Then the algorithm detected R peak and T end point and cancelled the QRS-T complex to get'p prototypes'. Next step was magnification of P prototypes with dispersion and detection of'p candidates'in the magnified signal, and then extraction of contextual information concerned with P-waves. For the last procedure, the CIR was applied to P candidates to confirm P-waves. The rule base consisted of three rules that discriminate and confirm P-waves. This algorithm was evaluated using 500 patient's raw data P-wave detection perFormance was in- creased 6.8% compared with the QRS-T complex cancellation method without application of the rule base.

• 대한화학회지
• /
• 제30권4호
• /
• pp.335-450
• /
• 1986

$25{\circ}$에서 $[Co(en)]_3Cl_3,\;[Co(NH_3)_6Cl_3$수용액의 열역학적 해리상수를 1~2000bar의 압력범위에서 전도도법으로 측정하였다. 착물이 해리할 때 하전을 띤 이온이 생성하여 부피가 감소하므로 압력이 증가함에 따라 해리상수($K^T$)는 커졌다. 즉 $[Co(en)]_3Cl_3$에 대한 $pK^T$값은 1bar에서 2.16, 500bar에서 2.08, 1000bar에서 2.08, 1500bar에서 2.05, 2000bar에서 2.03이었고, $[Co(NH_3)_6Cl_3$의 $P^K^T$는 1bar에서 2.02, 500bar에서 1.96, 1000bar에서 1.90, 1500bar에서 1.88, 2000bar에서는 1.87이었다. 각 압력에서 Stokes반경과 해리상수($K^T$)값을 비교 분석하여 착물의 이온쌍 형성에는 정전기적 인력 이외에 Internal Conjugate Base(ICB)효과도 영향을 미쳤으며 이효과는 압력이 증가할 수록 커졌다.

• 산업기술연구
• /
• 제9권
• /
• pp.67-77
• /
• 1989

This study is concerned with the accuracy, the pattern of error with which subjects can interpolate the location of a pointer or a target between two graduation markers with various size on CRT display. Stimuli were graphic images on CRT with a linear, end-marked, ungraduated scales having a target for t base-line sizes. The location of a target is estimated in units over the range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less 2 units, modal error was 1, and most error(;99.6%) was within 10. Subjects had a more tendency to overestimate than to underestimate at the left-part of base-line in all siges, and an opposite tendency at the right-part. A proper size to minimize the interpolation error exists such that size 500. It is suggested that interpolation of fifths and even tenths will give a reguired accuracy for certain situations, and relative location and base-line size has a relevant attribute to interpolate.

• 자원환경지질
• /
• 제23권2호
• /
• pp.183-199
• /
• 1990

Ore deposits of Dongwon mine are composed of numerous gold and silver veins emplaced in sedimentary rocks of Cambrian Choseon Supergroup and granitoids of Cretaceous age. Ore veins of the mine can be divided into gold and silver veins on the base of vein structure, mineral assemblage and vein trends. Mutual relationships between gold and silver veins are uncertain. Gold veins are simple veins which are composed of base-metal sulfides, and electrum with quartz and ankerite. On the other hand, silver veins are complex veins which reveal three distinct stages of mineral deposition based on vein structure; stage I, deposition of small amounts of oxides and pyrite with quartz; stage II, deposition of base-metal sulfides, small amounts of Ag-bearing minerals, calcite and quartz; stage III, deposition of base metal sulfides, electrum, Ag-sulfosalts, native silver, carbonates and quartz. Homogenization temperature and salinity of fluid inclusion from quartz of gold vein are as follows; $229^{\circ}$ to $283^{\circ}C$, 4.7 to 6.4 wt.% equivalent NaCI. The ore mineralogy suggests that temperature(T) and sulfur fugacity($fs_2$) of the formation of the gold vein and stage III of silver vein are estimated as T ; $294^{\circ}$ to $318^{\circ}C$, $fs_2\;10^{-9.4}$ to $10^{-10.1}$ atm. and T; $240^{\circ}$ to $279^{\circ}C$, $fs_2;10^{-11.1}$ to $10^{-17.3}$ atm. respectively. Pressure condition during gold vein formation estimated from data of ore mineralogy and fluid inclusion range 500 to 750 bar.

• 한국자기학회지
• /
• 제7권2호
• /
• pp.82-89
• /
• 1997

DC magnetron sputtering 방법에 의해 Corrnign glass위에 기저층인 Fe와 Cu의 두께를 다르게 하면서 buffer/[Co(17 .agns. )/Cu(t .angs. )]$_{N}$의 형태로 다층박막을 제작하여 자기저항비의 비자성층 Cu 층 두께, 기저층 종류와 두께, 다층박막의 층 수 의존성을 조사 하였다. 제작된 시료를 500 .deg. C 까지의 열처리를 행한 후 열처리가 이시료의 구조, 자기적 성질 및 자기저항에 미치는 여향을 조사하기 위하여 X-선 회절분석, 시료진동형자기계(VSM) 분석, 자기저항 측정을 하였다. Fe 기저층의 두께가 50 .angs. 이고 Cu 두께가 24 .angs. 일때 극대 자기저항비 21%가 관찰되었다. 낮은 base 압력 중에서 막의 증착은 산화를 억제하여 자기저항비를 증가시켰다. 400 .deg. C 까지의 시료에 대한 열처리는 다층박막의 주기성을 유지한채 더 큰 grain size를 갖게 하여 극대 자기저항비를 나타내는 Cu 두께를 갖는 시료들은 열처리 후 반강자성적으로 결합한 막의 부분이 증가함으로써 자기저항비가 증가 하다가 500 .deg. C에서는 계면의 확산에 의대 감소하였다.