• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1392-1398
• /
• 2000

In this paper, Sub Harmonic Ring Mixer using Anti-Parallel Diode Pair is studied. Conventional mixers mix LO signal with RF signal and, obtain IF signal from the difference between LO and RF. Sub harmonic ring mixers using APDP mix RF signal with the second harmonic of LO signal, LO frequency needed for conventional receiver is reduced by 1/2.The produced mixer showed 12 dB conversion loss, and 1 dB compression point of IF signal, in respect to RF signal, was found at the 0 dBm RF signal. Isolation LO/IF and LO/RF is 24.6 dB and 22.5 dB respectively. Isolation RF/LO and LO/RF is 32.6 dB and 22.5 dB respectively.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.875-879
• /
• 2004

In this paper, sub-harmonic pumped(SHP) mixer using anti-parallel diode pair(APDP) is designed for 5 GHz band wireless communication system. Conventional mixers mix LO with RF, and obtain IF signal from the difference between LO and RF. As the frequency increase, LO signal requires higher LO power, better phase noise characteristics, more stable La. However, using APDP, the SHP mixer mixes the 2nd harmonics of LO signal. Therefore, the SHP mixer has an advantage that the LO signal frequency required for IF signal is reduced at half value of LO fundamental frequency. When LO power is 3 dBm, the conversion loss of manufactured SHP mixer is 12.83 dB. The isolation of LO/IF, 2LO/IF, RF/1F and LO/RF is 39.17 dB, 58 dB, 34 dB, and 67.9 dB. respectively. For this case, IP3 at input is 8 dBm.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.79-85
• /
• 2004

In this paper, Sub harmonic mixer using anti-parallel diode pair is designed for 5.8 GHz Wireless LAN. Conventional mixers mix LO with RF and obtain IF signal from the difference between LO and RF. As frequency increase, LO signal is required increasing LO power, better phase noise, stable LO. But, using APDP, the SHP mixer mix the harmonics of LO signal. Therefore, Sub harmonic mixer is advantage that necessary LO signal frequency was used to operate the 1/2. When LO power is 3 dBm, the conversion loss of manufactured SHP mixer is 12.83 dB. The isolation of LO/IF, 2LO/IF, RF/IF and LO/RF is 39.17 dB, 58 dB, 34 dB, 67.9 dB. And IIP3 is 8 dBm.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.69-78
• /
• 1999

In this paper, direct conversion receiver was designed to even harmonic anti-paralled diode pair ring mixer. Using a second harmonic component of LO instead of LO signal and RF signal are mixed by SHP(Sub Harmonic Pumped) mixer with anti-parallel diode pair. Canceling the harmonics of LO signal in ring mixer, SHP mixer using anti-parallel diode pair could mostly reduce the radiation of LO signal through a input port the most, good isolation characteristic, and low spurious characteristic by LO signal was shown over broad band. The produced SHP mixer showed LO/IF, RF/IF and LO/RF isolation was 24.6dB,36.2dB and 22.5dB respectively. And conversion loss was measured 15.6dB, IF output -35.6dBm with -20dBm RF input and 5.5dBm LO signal. 1dB compression point of If signal, in respect to RF signal, was found at the 0dbm RF signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1104-1109
• /
• 2005

In this paper, a Ka-band harmonic mixer is designed and fabricated on the base of the multiplier theory that there is a bias point to maximize the third harmonic order($3f_{LO}$) with respect to a fundamental LO frequency($f_{LO}$), which can make the high-order mixing element($f_{RF}{\pm}3f_{LO}$) to be greater than other mixing elements, Pumping a RF frequency($f_{RF}$) and LO frequency($f_{LO}$). The harmonic mixer by the proposed design method is fabricated by using a commercial GaAs MESFET device with a plastic package and overcome these disadvantages that a conventional mixer in Ka-band suffer from a high cost, inefficient productivity and circuit complexity. The harmonic mixer have a -10 dB conversion loss at the IF Sequency($3f_{LO}-f_{RF}$=1.0GHz) by selecting a gate bias voltage for the maximum third-order LO harmonic element($3f_{LO}$=34.5 GHz) as pumping LO frequency($f_{LO}$=11.5 GHz) With respect to RF Sequency ($f_{RF}$=33.5GHz)

• YAKHAK HOEJI
• /
• v.56 no.6
• /
• pp.347-351
• /
• 2012

5-Lipoxygenase (5-LO) catalyzes the formation of two major groups of leukotrienes, LTB4 and cysteinyl leukotrienes (CysLT), and it has been implicated as a promising drug target to treat various inflammatory diseases. Since its role in mature osteoclasts (mOCs) had not been reported, we investigated the effect of 5-LO inhibitors on mOCs. We showed that 5-LO inhibitors dose-dependently decreases the number of mOCs. The effects of 5-LO inhibitors were reversible, suggesting that they did not cause any cellular damages in mOCs. We further demonstrated that the suppression of mOCs by 5-LO inhibitors was caused mainly by disruption of the actin ring formation. Similar effects were shown with CysLT receptor (CysLTR)1 antagonist in mOCs. The mRNA expression of CysLTR1 and the production of CysLT were increased in mOCs. These results indicate that CysLTR1 mediates the suppression of mOCs by 5-LO inhibitors. Taken together, this study demonstrated that 5-LO plays important role in mOCs and possibly a novel therapeutic target for bone resorption diseases.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.56-58
• /
• 2002

In this paper, the double conversion gate mixer using a half-LO frequency is described at 25 GHz band. The proposed mixer uses two HEMTs excited by a single LO signal of half-LO frequency in order to generate the second IF signal. That is, the LO signal having the half-LO frequency is only fed into the gate of the first HEMT mixer as a normal gate mixer. The LO signal through the first mixer is find into the second mixer The proposed miler requires not only half of the normal LO frequency, but also lower LO power than the conventional subharmonically pumped milers. Over the bandwidth of 500 MHz at 24.5 GHz, the conversion gain is 2.5 dB, the noise figure is 9 dB, and the isolation between RF and LO port is 32 dB when the LO poller is 0 dBm at 12.65 GHz.

• The Korean Journal of Physiology and Pharmacology
• /
• v.19 no.3
• /
• pp.263-268
• /
• 2015

5-Lipoxygenase (5-LO) plays a pivotal role in the progression of atherosclerosis. Therefore, this study investigated the molecular mechanisms involved in 5-LO expression on monocytes induced by LPS. Stimulation of THP-1 monocytes with LPS ($0{\sim}3{\mu}g/ml$) increased 5-LO promoter activity and 5-LO protein expression in a concentration-dependent manner. LPS-induced 5-LO expression was blocked by pharmacological inhibition of the Akt pathway, but not by inhibitors of MAPK pathways including the ERK, JNK, and p38 MAPK pathways. In line with these results, LPS increased the phosphorylation of Akt, suggesting a role for the Akt pathway in LPS-induced 5-LO expression. In a promoter activity assay conducted to identify transcription factors, both Sp1 and NF-${\kappa}B$ were found to play central roles in 5-LO expression in LPS-treated monocytes. The LPS-enhanced activities of Sp1 and NF-${\kappa}B$ were attenuated by an Akt inhibitor. Moreover, the LPS-enhanced phosphorylation of Akt was significantly attenuated in cells pretreated with an anti-TLR4 antibody. Taken together, 5-LO expression in LPS-stimulated monocytes is regulated at the transcriptional level via TLR4/Akt-mediated activations of Sp1 and NF-${\kappa}B$ pathways in monocytes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.45-50
• /
• 2005

In this paper, a broadband single balanced mixer is presented using a wideband rat-race implementation by vertical coupling. Frequency is selected as $1.5{\sim}3$ GHz for RF, $1.64{\sim}3.14$ GHz for LO, and 140 MHz for IF signals. When LO signal with 6 dBm at 2.7 GHz is injected, a conversion loss of 7.5 dB and RF to LO isolation of 30 dB are obtained. Also, an average conversion loss of 10 dB, RF to LO isolation of 30 dB, and LO to IF isolation of 45 dB are obtained for frequency band of $1.5{\sim}3$ GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.829-836
• /
• 2019

IoT devices are widely used in network construction and are increasing. If necessary, heterogeneous IoT devices are used for data transmission. This paper proposes to prevent the method of data loss due to differences in throughput when the local network is constructed by Bluetooth 5 and long range network does by LoRa(Long Range). Data loss occur when the data transmits through LoRa, due to the throughputs of Bluetooth 5 faster than that of LoRa. The prevent method proposed by this paper can apply not only Bluetooth 5 and LoRa but heterogeneous IoT devices and expect to prevent data loss due to differences in throughput between heterogeneous IoT devices. Also, this paper shows the simulation result by applying the proposed avoid method. In this paper, two way to the preventive method shows the data transmission ratio and amount of memory that of necessity.