• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• The Journal of Industrial Distribution & Business
• /
• 제2권2호
• /
• pp.5-14
• /
• 2011

Opening agricultural market expansion, reduced purchases through wholesale markets, expanding the influence large retailers of consumer's market such as changes in the distribution system to the farmer's market conditions are changing rapidly. Because of this, retailers of the scaled and chain-store operations was centered on distribution environmental changes of the consumer market place. In producing area due to changes in market conditions in the agricultural production of in producing area distribution organization and the size distribution can not be put off no longer challenge is imminent. If it do not raise forces banded together, the producer is bound to remain as the weak. To support the distribution of this production was introduced in 2000 enable the Activation Project of in producing area distribution. Recent in producing area Changes of Agricultural conditions in order to cope with the Small-scale farmers and small individual farmers are becoming Scaled and specialized. Also, is specific to each item and regional is showing aspects. Government support for Activation Project of in producing area distribution is greatly improved, but in terms of competitiveness on the market still is showing the limitations. The most common of these problems, the market response if in producing area producer's organization and scale of the problem. Equipped for the purpose of consumer market place responsiveness unreasonable propelled outward from the Painter-sized weakens the organizational power. also, Difficult to succeed organizational size is a dissolution or anything within a few years, farmers around the best producer organizations, such as deviation occurs is exposed to a variety of issues. In this study, previous studies refer to the recent changes in agricultural retail environment, background and needs of organization·scaled, Determine the status of the domestic in producing area organizations and derived Problems, look into Domestic and overseas of in producing area organization with best practices for enhancing the competitiveness of the proposed improvement are intended to. In the future, in producing area distribution policy would like to provide direction to the development. The results of the study showed the follwing : 1) enhance utilization and orrganized through the diversification of the agricultural Collection systems. 2) Scaled to achieve through Items of specialized a wide area marketing. 3) Management operating units, such as installation and operating that overseas the best practices " Comite Economique Agricole Regional 'Fruits et Legumes' de Bretagne". 4) To establish a support system that in producing area distribution organization model development for appropriate domestic. In particular, in case of domestic in producing area distribution organization, through the analysis of various case study that a successful organization and scaled. The process of the various challenges arising in organizational scaled and generalization, and by the way he goes about trying to overcome is required. At the end of the study's limitations and future research directions suggested.

• Journal of Korea Entertainment Industry Association
• /
• 제15권8호
• /
• pp.91-106
• /
• 2021

The purpose of this study is to define the process of leading to self-realization and social solidarity through the process of contents planning, production, and distribution as Contents Activism, and to categorize specific execution steps. Based on this, we try to analyze concrete cases to find out the social meaning and effect of the practice of Contents Activism. As for the research method, after examining the differences between traditional activism and Contents Activism through a review of previous studies, the implementation process of Contents Activism was categorized into 7 steps. By applying this model, this study analyzed two cases of Contents Activism. The first case is the 100 laps challenge in the backyard planned by an elderly man ahead of his 100th birthday in early 2020, when the fear of COVID-19 spread. Sir Tom Moore, who lives in the UK, challenged to walk 100 laps in the backyard to help medical staff from the National Health Service as COVID-19 infections and deaths increased due to a lack of protective equipment. His challenge, which is difficult to walk without assistive devices due to cancer surgery and fall aftereffects, drew sympathy and participation from many people, leading to global solidarity. The second case analyzes the case of 'The Unfreedom of Expression, Afterwards' by Kim Seo-kyung and Kim Woon-seong, who were invited to the 2019 Aichi Triennale special exhibition in Japan. The 'Unfreedom of Expression, After' exhibition was a project to display the Statue of Peace and the lives of comfort women in the Japanese military, but it was withdrawn after three days of war due to threats and attacks from the far-right forces. Overseas artists who heard this news resisted the Triennale's decision, took and shared photos in the same pose as the Statue of Peace on social media such as Twitter and Instagram, empathizing with the historical significance of the Statue of Peace. Activism, which began with artists, has expanded through social media to the homes, workplaces, and streets of ordinary citizens living in various regions. The two cases can be said to be Contents Activism that led to social practice while solidifying and communicating with someone through contents.

• KDI Journal of Economic Policy
• /
• 제32권2호
• /
• pp.93-143
• /
• 2010

This paper estimates the impact of Japan's economic sanction on DPRK trade in the 2000s. It conceptualizes the effects of sanction on DPRK trade, econometrically tests whether such effects exist in case of Japan's sanction using currently available DPRK trade statistics, and measures the size of the effects by correcting and reconfiguring the deficiencies of the currently available DPRK trade statistics. The main findings of the paper are as follows. First, Japan's sanction can have two different effects on DPRK trade: 'Sanction Country Effect' and "Third Country Effect.' The former means that the sanction diminishes DPRK trade with Japan while the latter refers to the effects on DPRK trade with other countries as well. The third country effect can arise not simply because the DPRK changes its trade routes to circumvent the sanction, but because the sanction forces the DPRK to readjust its major trade items and patterns. Second, currently no official DPRK trade statistics are available. Thus, the so-called mirror data referring to DPRK trading partners' statistics should be employed for the analysis of the sanction effects. However, all currently available mirror data suffer from three fundamental problems: 1) they may omit the real trade partners of the DPRK; 2) they may confuse ROK trade with DPRK trade; 3) they cannot distinguish non-commercial trade from commercial trade, whereas only the latter concerns Japan's sanction. Considering those problems, we have to adopt the following method in order to reach a reasonable conclusion about the sanction effect. That is, we should repeat the same analysis using all different mirror data currently available, which include KOTRA, IMF and UN Commodity Trade Statistics, and then discuss only the common results from them. Third, currently available mirror data make the following points. 1) DPRK trade is well explained by the gravity model. 2) Japan's sanction has not only the sanction country effect but also the third country effect on DPRK trade. 3) The third country effect occurs differently on DPRK export and import. In case of export, the mirror statistics reveal positive (+) third country effects on all of the major trade partners of the DPRK, including South Korea, China and Thailand. However, on DPRK import, such third country effects are not statistically significant even for South Korea and China. 4) This suggests that Japan's sanction has greater effects on DPRK import rather than its export. Fourth, as far as DPRK export is concerned, it is possible to resolve the abovementioned fundamental problems of mirror data and thus reconstruct more accurate statistics on DPRK trade. Those reconstructed statistics lead us to following conclusions. 1) Japan's economic sanction diminished DPRK's export to Japan from 2004 to 2006 by 103 million dollars on annual average (Sanction Country Effect). It comprises around 60 percent of DPRK's export to Japan in 2003. 2) However, for the same period, the DPRK diverted its exports to other countries to cope up with Japan's sanction, and as a result its export to other countries increased by 85 million dollars on annual average (Third Country Effect). 3) This means that more than 80 per cent of the sanction country effect was made up for by the third country effect. And the actual size of impact that Japan's sanction made on DPRK export in total was merely 30 million dollars on annual average. 4) The third country effect occurred mostly in inter-Korean trade. In fact, Japan's sanction increased DPRK export to the ROK by 72 million dollars on annual average. In contrast, there was no statistically significant increase in DPRK export to China caused by Japan's sanction. 5) It means that the DPRK confronted Japan's sanction and mitigated its impact primarily by using inter-Korean trade and thus the ROK. Fifth, two things should be noted concerning the fourth results above. 1) The results capture the third country effect caused only by trade transfer. Facing Japan's sanction, the DPRK could transfer its existing trade with Japan to other countries. Also it could change its main export items and increase the export of those new items to other countries as mentioned in the first result. However, the fourth results above reflect only the former, not the latter. 2) Although Japan's sanction did not make a huge impact on DPRK export, it might not be necessarily true for DPRK import. Indeed the currently available mirror statistics suggest that Japan's sanction has greater effects on DPRK import. Hence it would not be wise to argue that Japan's sanction did not have much impact on DPRK trade in general, simply using the fourth result above.