• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1349-1356
• /
• 1995

The change of permeation mechanism from Knudsen diffusion to micropore diffusion was observed after CVD modification of an alumina-sol coated alumina support which was prepared by slip coating process. Permselectivities of He/N2, H2/N2, and CO2/N2 were 5.67, 5.02, and 1.44, respectively. These values were higher than those under Knudsen diffusion controlled region.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1193-1201
• /
• 1993

본 연구에서는 통계학적 이론 및 희귀분석에 근거한 보정함수를 모델 수정에 도입하여 조업조건별로 예측오차 요인들을 제거함으로써 예측 모델의 정도를 향상시키 고자 하였다. 이를 위해 일반강에 비해 압연하중 모델의 예측정도가 상대적으로 낮은 극저탄소강을 대상으로 하여 압연조업에 따른 압연하중 예측모델의 오차요인을 조업인 자별로 분석하였고 적용시켜 모델의 적중도를 향상시켰다.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.891-906
• /
• 2014

The purpose of this study is to propose a modification factor to reflect the lateral stiffness modification when a step is located in flat plates. Reinforced concrete slabs with steps have different structural characteristics that are demonstrated by a series of structural experiment and nonlinear analyses. The corner at the step is weak and flexible, and the associated rotational stiffness degradation at the corner of the step is identified through analyses of 6 types of models using a nonlinear finite element program. Then a systematic analysis of stiffness changes is performed using a linear finite element procedure along with rotational springs. The lateral stiffness of reinforced concrete flat plates with steps is mainly affected by the step length, location, thickness and height. Therefore, a single modification factor for each of these variables is obtained, while other variables are constrained. When multiple variables are considered, each single modification factor is multiplied by the other. Such a method is verified by a comparative analysis. Finally, a complex modification factor can be applied to the existing effective slab width.

• 한국지진공학회논문집
• /
• 제23권4호
• /
• pp.201-209
• /
• 2019

Response modification factors of school facilities for non-seismic RC moment frames with partial masonry infills in 'Manual for Seismic Performance Evaluation and Retrofit of School Facilities' published in 2018 were investigated in the preceding study. However, since previous studies are based on 2D frame analysis and limited analysis conditions, additional verification needs to be performed to further apply various conditions including orthogonal effect of seismic load. Therefore, this study is to select appropriate response modification factors of school facilities for non-seismic RC moment frames with partial masonry infills by 3D frame analysis. The results are as follows. An appropriate response modification factor for non-seismic RC moment frames with partial masonry infills is proposed as 2.5 for all cases if the period is longer than 0.6 seconds. Also if the period is less than 0.4 seconds and the ratio of shear-controlled columns is less than 30%, 2.5 is chosen too. However, if the period is less than 0.4 seconds and the ratio of shear-controlled columns is higher than 30%, the response modification factor shall be reduced to 2.0. If the period is between 0.4 and 0.6 seconds, then linearly interpolates the response correction factor.

• 소음진동
• /
• 제10권5호
• /
• pp.859-864
• /
• 2000

An effective and new method of reducing the noise of a HDD by structural modification of cover was investigated in this study. The correlation between the noise characteristics of the HDD and the vibration characteristics of the cover, which is the main source of the HDD noise, is found from experiments. A theoretical analysis is performed to find the modification method of the cover, and this modification method is applied the real cover of the HDD. The modification reduces the vibration of the cover transferred from driving motor. The effect of the modification is verified through noise tests.

• Animal cells and systems
• /
• 제12권3호
• /
• pp.117-125
• /
• 2008

One of the interesting trends in genome research is the study about epigenetic modification above single gene level. Epigenetics refers study about heritable change in the genome, which accompany modification in DNA or Chromatin besides DNA sequence alteration. We used to have the idea that the coding potential of the genome lies within the arrangement of the four bases A, T, G, C; However, additional information that affects phenotype is stored in the distribution of the modified base 5-methylcytosine. This form of information storage is flexible enough to be adapted for different somatic cell types, yet is stable enough to be retained during mitosis and/or meiosis. Epigenetic modification is a modification of the genome, as opposed to being part of the genome, so is known as "epigenetics"(Greek for "upon" genetics). This modification could be methylation on Cytosine base or post translational modification on histone protein(methylation, acetylation, phosphorylation, Sumoylation)($Dimitrijevi\hat{E}$ et al 2005). In this review, we would like to focus on the relationship of DNA methylation and cancer.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권1호
• /
• pp.169-175
• /
• 2001

Bridge load rating calculations provide a basis for determining the safe load capacity of bridge. Load rating requires engineering judgement in determining a rating value that is applicable to maintaining the safe use of the bridge and arriving at posting and permit decisions. Load testing is an effective means in calculating the rating value of bridge. In Korea, load carrying capacity of bridge is modified by response modification factor that is determined from comparisons of measured values and analysis results. The response modification factor may be corrupted by vehicle location error that is defined as the gap of test vehicle location between load testing and analysis. In this study, the effects of vehicle location error to structural response and response modification factor are investigated, and a new method for evaluating response modification factor is proposed. The random data analysis shows that the proposed method is less sensitive to vehicle location error than the present method.

• 대한금속재료학회지
• /
• 제46권5호
• /
• pp.304-309
• /
• 2008

Magnesium alloys containing $Mg_2Si$ particles, as a promising cheap heat-resistant magnesium alloy for automobile power train parts applications, are attracting more attention of both material scientists and design engineers. Modification of the Chinese script shape $Mg_2Si$ particle is a key for using this alloy in sand or permanent mould casting. In the present work, the modification effect of Sr and Sb on the corrosion properties of the Mg-5Al-2Si alloy was investigated. Sr or Sb addition promoted the formation of fine polygonal shape $Mg_2Si$ particles by providing the nucleation sites. Sr was more effective element than Sb for shape modification of Chinese script shape $Mg_2Si$. Such improved microstructure of the modified alloy resulted in large improvement in corrosion resistance as compared to unmodified Mg-5Al-2Si alloy.

• 열처리공학회지
• /
• 제24권2호
• /
• pp.82-86
• /
• 2011

The influences of Bi addition on morphological modification of $Mg_2Si$ phase and mechanical properties were investigated in Mg-7%Al-0.5%Si casting alloy. It was found that the addition of 0.3%Bi changed the $Mg_2Si$ morphology from coarse Chinese script type to polygonal type, and significantly decreased the size to ~5 ${\mu}m$ or less with the increase of number density. The modification of $Mg_2Si$ phase by the addition of Bi resulted in the improvement of tensile properties of the Mg-Al-Si alloy at RT and $175^{\circ}C$.

• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.17-22
• /
• 1997

Casein was chemically modified with acetic, succinic, and maleic anhydride and changes in functional pro-perties were evaluated as affected by the degree of modification. Chemical modification resulted in casein with unique functional properties depending upon the type of anhydrid used and the degree of modification. It was possible to control heat coagulation, calcium precipitability, forming and emulsion capacity and stability. At pH 4.5 heat coagulation was 0% in the case 74.1% acetylated casein; on the contrary, succinylation and maleyation resulted in highly heat sensitive protein. Foaming properties were improved markedly by suc-cinylation and maleylation at pH 4.5. However, emulsifying properties were enhanced only by maleylation.