• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.95-108
• /
• 2001

The provision of spatial data is a key infrastructural requirement for the promotion of economic growth, environmental quality, social progress, etc. 4S technology integrates 4 kinds of systems that process spatial data: GIS (Geographic Information System), GNSS (Global Navigation Satellite System), ITS (Intelligent Transport System), and SIIS (Spatial Imagery Information System). Spatial data processing field is expected to get synergy effect and overcomes development limit of individual unit technology via 4S technology. This paper discusses both the development of 4S-kernel technology and the construction of 4S-based framework, In the development of 4S kernel technology, we will concentrate on the following issues: the development of 4S base components for reciprocity integration among GIS, SIIS, GNSS and ITS technologies, the development of 4S-Mobile S/W and H/W, 4S-Van components, and national LBS technologies. And in the construction of 4S-based framework, we will especially concentrate on the ISP for overall 4S technologies, the international cooperative research center, and the guide model deduction for supervision and certification of 4S projects. Finally, we examine about how the construction of 4S-baed framework affects 4S industry.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.77-80
• /
• 2001

이동통신시장 및 IT 시장의 급성장, Mobile 인터넷 기술의 발전 그리고 4S 관련 기술의 발전에 힘입어 국내에서도 LBS 관련 산업이 활성화되고 있다. 이에 본 연구에서는 이러한 LBS 를 효율적으로 지원하기 위하여 기본적으로 요구되는 4S 기술의 개념적 정의를 살펴보고, 특히 LBS 사업에 직간접 적으로 필요한 4S관련 기반구축연구 및 4S 핵심기술개발에 대하여 소개하고 있다. 4S 핵심기술개발 분야에서는 우선적으로 LBS 의 기반 기술이 되는 4S 핵심기술 및 상호연계 기술[3], 4S-Mobile 관련 기술 그리고 4S-VAN 관련 기술 개발 사항에 대하여 중점적으로 살펴보며, 4S 관련 기반구축연구분야에서는 LBS 산업을 활성화하고자 할 때 문제 될 수 있는 4S 및 LBS 관련 표준화 작업, 법 및 제도연구 그리고 감리지침 모델 도출에 대하여 중점적으로 살펴보고자 한다. 끝으로 이러한 4S 기반 프레임워크 구축이 향후 LBS 와 4S 산업에 어떠한 영향을 미치는지에 대하여 살펴본다.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.27-36
• /
• 2001

The 4S represents four systems that are commonly related to spatial information: GIS, GNSS, SIIS, ITS. The 4S technology that integrates the four systems gets more and more interests recently. In this paper, we adopt component paradigm to 4S system, apply it to the disaster control field, and design a system based on component architecture. There are many application areas to which the 4S technology can be applied. but the disaster control system is one of the most typical fields. We apply 4S technology to the disaster control fields, including fire, flood, and typhoon. Because of the characteristics of disaster control system that handles large-volume map data, component-based 4S system will take considerable effects on the improvement of disaster control works. The core functions that are common to all disaster control fields are included in 4S kernel component because of the consideration of time performance. Remaining non-common functions are implemented as separate components named as work-specific components. In our suggested system, a vehicle named as 4S-Van collects real-time information on the spot of disaster and sends image and location information to control center via wireless transmission. The control center analyzes the information together with its own spatial database or map, which was not possible in the conventional disaster control works. The control center can get desired information by sending a request of re-transmission to 4S-Van. Such method of real-time transmission supported by on-the-spot information makes the current situation judgment, decision making, and order issuance more exact, effective, and timely. The suggested system and method are expected to bring remarkable improvement on disaster control works.

• Rubber Technology
• /
• v.9 no.1
• /
• pp.1-12
• /
• 2008

Effects of silane modifier, bis(triethoxysilylpropyl) tetrasulfide (TESPT(S4)) and bis(triethoxysilylpropyl) disulfide (TESPD(S2)), on silica filled compound were investigated upon processability, dynamic, mechanical, heat build-up, blowout properties, and silica dispersion in natural rubber (NR). The temperature of the S2 treated silica compound generated higher than that of the S4 treated compound during internal mixer compounding. The shear viscosity of the S2 compound exhibited lower than that of the S4 compound and the viscosity measured in dynamic mode was close to each other. The elongation modulus of the S2 compound exhibited lower than that of the S4; however, the tear resistance strength of the S2 compound exhibited higher than that of the S4 compound. The loss tan$\delta$ values of the S2 compound exhibited higher than those of the S4 at room temperature. The augmentation of the test temperature lowered the tan$\delta$ values of each compound, which results in close tan$\delta$ values to each other at $100^{\circ}C$. The S2 compound deformed less than the S4 compound, and the blowout time of each compound was close to each other. The S2 compound generated more heat build-up than the S4 compound. The abrasion loss of the S2 compound was less than that of the S4 compound. The size of the silica agglomerate reduced on both S4 and S2 compounds upon vulcanization. The addition of the bifunctional silanes (S2 and S4) on silica filled NR compound improved the processability of each compound and their effects were more significant on the S2 compound than the S4 compound. After vulcanization the silica agglomerate size of each compound reduced compared with before vulcanization.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.318-323
• /
• 1992

Following seven new nucleophilic adducts of sulfilimine compounds were prepared by the addition of 1-methyl-5-mercapto-1,2,3,4-tetrazole to vinylsulfilimine derivatives; S-Phenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-tolyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-m-tolyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-chlorophenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-bromophenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-methoxyphenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine and S-p-nitrophenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine. The structures of these adducts were confirmed by elemental analyses, MP, UV, IR-and NMR-Spectra.

• Journal of Aquaculture
• /
• v.19 no.2
• /
• pp.95-98
• /
• 2006

This study was performed to determine possibility of compensatory growth of juvenile olive flounder fed a commercial feed during the summer season. Five treatments of fish with triplicates were prepared: C, S1, S2, S3 and S4. Fish in the control group (C) was hand-fed with the commercial feed to apparent satiation twice daily for 6 days a week during 6 weeks. Fish in S1, S2, S3, and S4 experienced 1, 2, 3, and 4 weeks of starvation before fed to satiation twice daily for 5, 4, 3, and 2 weeks, respectively. The feeding trial lasted far 6 weeks. Survival of flounder in C, S1 and S2 was significantly (P<0.05) higher than that offish in S4. Weight gain and specific growth rate (SGR) of flounder in C and S1 were significantly (P<0.05) higher than those of fish in S2, S3 or S4. And weight gain and SGR of flounder in S2 and S3 were significantly (P<0.05) higher than those of fish in S4. Feed consumption of flounder tended to increase with weeks of feeding. Feed efficiency ratio and protein efficiency ratio for flounder in C, S1, S2 and S3 were significantly (P<0.05) higher than those for fish in S4. Moisture content of the whole fish in C was lowest, but highest for fish in S4, respectively. Crude protein content of the whole fish in C was highest, but lowest far fish in S4, respectively. Crude lipid content of the whole fish in C, S1 and S2 was significantly (P<0.05) higher than that of fish in S4. In conclusion, full compensatory growth was obtained in juvenile olive flounder fed for 5 weeks after 1-week feed deprivation during the summer season. Compensatory growth of fish was well supported by improvement in feed efficiency ratio and protein efficiency ratio.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.23-26
• /
• 1986

The synthetic conditions of $ ZrSiO_4-Cd(S_xS_{1-x})$ stains from CdS, Se, $SiO_2$ , 4ZrO_2$ and Lif were investigated and the colors were examined. Colors of the stains prepared were yellow orange red pink ruby and violet in relation to both the content of CdS-Se in $ZrSiO_4$ and firing temperature. Colors of these series stains were thermally stabilized probably by the structural stability of zirconium silicate. Furthermore by the result of X-ray diffraction analysis it is assumed that color of the zircon cadmium sulphoselenide $ ZrSiO_4-Cd(S_xS_{1-x})$ stain is developed by neither the coloring ions in $ZrSiO_4$ lattice nor the solid solution of $ZrSiO_4$ and $Cd(S_xS_{1-x})$ but by the small crystals of $Cd(S_xS_{1-x})$ being occluded by the zirconium silicate during sintering process.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.392-395
• /
• 2014

(2S,3S,4S)-3,4-Dihydroxyglutamic acid (DHGA), a biologically active ${\alpha},{\beta}$-dihydroxy-${\gamma}$-amino acid, was efficiently synthesized from a readily available D-serine derivative in 30% overall yield over 11 steps. The key stereoselective $OsO_4$-catalyzed dihydroxylation reaction controlled by an N-diphenylmethylene group on the amino group of ${\gamma}$-amino-${\alpha},{\beta}$-unsaturated (Z)-ester successfully introduced the diol moiety of the intermediate 5a in 86% with more than 10 : 1 diastereomeric ration. Then it was in turn successfully converted to the desired target compound, (2S,3S,4S)-3,4-DHGA, via simple oxidation and hydrolysis in a highly stereoselective manner and a higher yield than the previous syntheses. This result strongly supports that our synthetic methodology of stereoselective $OsO_4$-catalyzed dihydroxylation should be useful in stereoselctive synthesis of various bioactive compounds with an amino diol moiety.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.48-54
• /
• 2012

The $[Fe_4S_4]^{2+}$ clusters with 2-, 3-, and 4-pyridinemethanethiolate (S2-Pic, S3-Pic, and S4-Pic, respectively) terminal ligands have been synthesized from the ligand substitution reaction of the $(^nBu_4N)_2[Fe_4S_4Cl_4]$ (I) cluster. The new $(^nBu_4N)_2[Fe_4S_4(SR)_4]$ (R = 2-Pic; II, 3-Pic; III, 4-Pic; IV) clusters were characterized by FTIR and UV-Vis spectroscopy. Cluster II was crystallized in the monoclinic space group C2/c with a = 24.530 (5) $\AA$, b = 24.636(4) $\AA$, c = 21.762(4) $\AA$, ${\beta}=103.253(3)^{\circ}$, and Z = 8. The X-ray structure of II showed two unique 2:2 site-differentiated $[Fe_4S_4]^{2+}$ clusters due to the bidentate-mode coordination by 2-pyridinemethanethiolate ligands. Cluster III was crystallized in the same monoclinic space group C2/c with a = 26.0740(18) $\AA$, b = 23.3195(16) $\AA$, c = 22.3720(15) $\AA$, ${\beta}=100.467(2)^{\circ}$, and Z = 8. The 3-pyridinemethanethiolate ligand of III was coordinated to the $[Fe_4S_4]^{2+}$ core as a terminal mode. Cluster IV with 4-pyridinemethanethiolate ligands was found to have a similar structure to the cluster III. Fully reversible $[Fe_4S_4]^{2+}/[Fe_4S_4]^+$ redox waves were observed from all three clusters by cyclic voltammetry measurement. The electrochemical potentials for the $[Fe_4S_4]^{2+}/[Fe_4S_4]^+$ transition decreased in the order of II, III and IV, and the reduction potential changes by the ligands were explained based on the structural differences among the complexes. The complex III was reacted with sulfonium salt of $[PhMeSCH_2-p-C_6H_4CN](BF_4)$ in MeCN to test possible radical-involving reaction as a functional model of the [$Fe_4S_4$]-SAM (S-adenosylmethionine) cofactor. However, the isolated reaction products of 3-pyridinemethanethiolate-p-cyanobenzylsulfide and thioanisole suggested that the reaction followed an ionic mechanism and the products formed from the terminal ligand attack to the sulfonium.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1794-1798
• /
• 2018

We have grown famatinite $Cu_3SbS_4$ films by using sulfurization of Cu/Sb stack film. Sulfurization at $500^{\circ}C$ produced famatinite $Cu_3SbS_4$ phase, while $400^{\circ}C$ and $450^{\circ}C$ sulfurization exhibited unreacted and mixed phases. The fabricated $Cu_3SbS_4$ film showed S-deficiency, and secondary phase of $Cu_{12}Sb_4S_{13}$. The secondary phase was confirmed by X-ray diffraction, Raman spectroscopy, photoluminescence and external quantum efficiency measurements. We have also fabricated solar cell in substrate type structure, ITO/ZnO/(Zn,Sn)O/$Cu_3SbS_4$/Mo/glass, where $Cu_3SbS_4$ was used as a absorber layer and (Zn,Sn)O was employed as a Cd-free buffer. Our best cell showed power conversion efficiency of 0.198%. Characterization results of $Cu_3SbS_4$ absorber indicates deep defect (due to S-deficiency) and low shunt resistance (due to $Cu_{12}Sb_4S_{13}$ phase). Thus in order to improve the cell efficiency, it is required to grow high quality $Cu_3SbS_4$ film with no S-deficiency and no secondary phase.