• The Journal of Advanced Prosthodontics
• /
• v.10 no.4
• /
• pp.321-327
• /
• 2018

PURPOSE. The purpose of this study was to compare the cutting method and the lamination method to investigate whether the CAD data of the proposed inlay shape are machined correctly. MATERIALS AND METHODS. The Mesial-Occlusal shape of the inlay was modeled by changing the stereolithography (STL). Each group used SLS (metal powder) or SLA (photocurable resin) in the additive method, and wax or zirconia in the subtractive method (n=10 per group, total n=40). Three-dimensional (3D) analysis program (Geomagic Control X inspection software; 3D systems) was used for the alignment and analysis. The root mean square (RMS) in the 2D plane state was measured within $50{\mu}m$ radius of eight comparison measuring points (CMP). Differences were analyzed using one-way analysis of variance and post-hoc Tukey's test were used (${\alpha}=.05$). RESULTS. There was a significant difference in RMS only in SLA and SLS of 2D section (P<.05). In CMP mean, CMP 4 ($-5.3{\pm}46.7{\mu}m$) had a value closest to 0, while CMP 6 ($20.1{\pm}42.4{\mu}m$) and CMP 1 ($-89.2{\pm}61.4{\mu}m$) had the greatest positive value and the greatest negative value, respectively. CONCLUSION. Since the errors obtained from the study do not exceed the clinically acceptable values, the lamination method and the cutting method can be used clinically.

• Journal of the Korean Chemical Society
• /
• v.38 no.7
• /
• pp.485-495
• /
• 1994

Several new symmetric and asymmetric homo and hetero dinuclear complexes of the type $[Cl(dppp)(NO)_2M({\mu}-pyz)M'(NO)_2(dppp)Cl][ClO_4]_2$ and $[Cl(phen)(NO)_2M({\mu}-pyz)M'(NO)_2(dppp)Cl][ClO_4]_2$(M,M'= Mo or W; phen = 1,10-phenanthroline; dppp = 1,3-bis(diphenylphosphino)propane; pyz = 1,4-pyrazine) were synthesized in three-steps starting from $[M(NO)_2Cl_2]_n(M = Mo, W)$. The final products were purified by eluting it through silica gel column ($2{\times}20$ cm) with acetone as the eluent. Characterization of these complexes and some related complexes was accomplished through UV-vis., $^1H$-NMR, $^{13}C$-NMR and IR spectroscopies as well as elemental analysis. The infrared spectra indicate that the NO groups occupy cis-positions of the octahedral. The $^1H$ and $^{13}C-NMR$ data for the new compounds revealed a dimeric structures with bridged pyz.

• Natural Product Sciences
• /
• v.6 no.4
• /
• pp.193-198
• /
• 2000

Phytochemical study of the constitutive polyphenolics of the flower aqueous alcohol extract of Tamarix tetragyna was carried out. The new sulphated flavonol, quercetin 3',4'-dimethyl ether $3-O-KSO_3$ as well as the new natural galloyl glucose, $2-O-galloyl-({\alpha}/{\beta})-^4C_1-glucopyranose$ were isolated and characterized. The known sulphated flavonols, kaempferol 7,4-dimethyl ether $3,5-di-O-KSO_3$, quercetin 7-methyl ether $3,3',4'-tri-O-KSO_3$, quercetin 7,4'-dimethyl ether $3-O-KSO_3$ and quercetin $3-O-KSO_3$ and the known sulphated phenolics, isoferulic acid $3-O-KSO_3$ and ellagic acid 4,4'-dimethyl ether $3-O-KSO_3$ were also separated and identified. The structures were established by conventional methods of analysis and confirmed by $^1H-,\;^{13}C-NMR$ and negative ESI-mass spectrometry. 2D-homonuclear chemical shift correlation NMR experiment was applied for the new natural galloylglucose.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.231-239
• /
• 1997

We developed a procedure that can effectively separate and determine tertiary amines and quaternary ammonium salts in some samples with reverse phase ion-pair high performance chromatography, employing indirect spectrophotometric detection method. Detection and ion-pairing reagents used in this study were benzyl trimethylammonium chloride (BTMACl) and sodium dodecyl sulfate(DDSANa), respectively. Eluting the electrolyte solutions of some commercial electrolytic capacitors with a MeOH(40):water(60) eluent (pH 8.5 adjusted with NH4Cl-NH3 buffer) containing 0.010M DDSANa and 0.004 M BTMACl through Supelco LC-18 or ${\mu}$-Bondapak phenyl column, amines and ammonium salts contained in the sample were successfully separated and determined. Varying the composition, especially the content of quaternary ammonium salts, of electrolyte solutions based on this analysis. we could prepare the low impedance(0.08~0.13) electrolytic capacitors with excellent electrical properties and it was a confirmation that the analysis is favorable.

• Fire Science and Engineering
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2009

The aim of this study is to analyse the sensitivity of fire simulation parameters including grid size and solid angle number which affect the performance of subway cabin fire simulation by FDS 4.07 version. The results of sensitivity analysis shows average of $10{\sim}20%$ differences in plume temperature, upper layer temperature, and layer height depending on the change of grid size. The study also shows that simulation with 0.05m grid size produces better resolution than that with coarse one which is 0.1m.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.79-88
• /
• 2000

The objective of this finite element method study was to analyze the stress distribution induced in a maxillary central incisor Ni-Cr base metal coping ceramic crowns with various margin design. Margin designs of crown in this experiment were knife-edge metal margin on chamfer finishing line of tooth preparation(M1), butt metal margin on shoulder finishing line(M2), reinforced butt metal margin on shoulder finishing line(M3), beveled metal margin on bevelde shoulder finishing line(M4). Two- dimensional finite element models of crown designs were subjected to a simulated biting force of 100N which was forced over porcelain near the lingual incisal edge. Base on plane stress analysis, the maxium von Miss stresses(Mpa) in porcelain venner was 0.432, in metal coping was 0.579, in dentin abutment was 0.324 for M1 model, and M2 model revealed in porcelain was 0.556, in metal coping was 0.511, in dentin was 0.339, and M3 model revealed in porcelain was 0.556, in metal coping was 0.794, in dentin was 0.383 for M4 model. All values of each material in metal-ceramic crown were much below the critical failure values.

• Applied Biological Chemistry
• /
• v.32 no.2
• /
• pp.170-177
• /
• 1989

In order to seek the molecular basis of higher insecticidal activity of the carbamates with two methyl groups, m-xylyl-N-methylcarbamate(MXNMC) than the corresponding unsubstituted phenyl N-methylcarbamate(PNMC), these two derivatives have been studied by molecular orbital(MO) theoretically using extended $H\ddot{u}ckel$ theory(EHT), and analysis of regression and linear free energy relationship(LFER). The most stable stereo structure(Z, Z) shows that the phenyl group occupies vertical(${\theta}=90^{\circ}$) position on the plane of the N-methylcarbamyl group. Regression analysis shows that especially good correlation exists between the $pI_{50}$ values and the calculated MO quantities when the hydrogen atomic charge of metaposition and of m-methyl groups, and LUMO energy are taken as variables. The LFER analysis on the carbamylation indicates that field(F) effect(60%) is slightly larger than resonance(R) effect(40%) in PNMC(E>R), whereas, in case of MXNMC, R effect(98.6%) is much larger than F effect(1.4%)($R{\gg}F$). From the basis on the findings, the enhancement of insecticidal activity of MXNMC may be the result of hyperconjugation by m-methyl groups.

• Parasites, Hosts and Diseases
• /
• v.35 no.3
• /
• pp.203-210
• /
• 1997

The difrrrenlial display reverse transcription polymerase chain reaction (DDRT-PCR) aniilysis roils performed to identify the pathogellir strain specific amplicons. mRNAs were purified from the trophozoites of the pathogenif strain YS-27 and the non-pathogenic strain S 16. respectively. Three kinds of rirsl stranded rDNAs were reverse transcribed from the mRNAs by one base anchored oligo-dT 11M (M: A. C, or G) primers. Each cDNA lemplatr was used for DDRT-PCK analysis. A total of 144 pathogenic strain specific amplicons was observed in DDRT-PCR analysis using primer combinations of the 11 arbitrary primers and the 3 one base anchored oli해-dT11M primers. Of these 31 amplit'tons were verified as the amplirons amplified only from the mRNAs of the pathogenic strain by DNA slots biol llybridizatioil. Furthel cklaracleization of the 31 pathogenic strain sprcifil amplicons by DNA slot blot hybridlnation analysis using biotin labeled Probes or the PCR amplified DNA of rysteine proteinase genes revealed that 21 of them were amplliried from the maNAs of the cysteine proteinase genes. Four randomly selected amplirons out of the rest 10 amplirons were used fur screening of cDNA library followed by immunoscreening and all of them were turned outs to be amplified from the mRNA.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.157-167
• /
• 2007

The purpose of this study was to analyze kinematic techniques in the woman's 100m hurdle. In order to find the kinematic parameters, a 3-D video system for kinematic analysis-kwon3d 3.1(Kwon3D Motion Analysis Program Version 3.1)-was used. Eight JVC video cameras(GR-HD1KR) were used to film the performance of Lee Yeon-Kyoung at a frame rate of 60fields/s. The kinematic characteristics from the first hurdle to last hurdle were analyzed at the clearing hurdle spots such as distance, velocities, heights and angles. The real-life three-dimensional coordinates of 20 body landmarks during each phases were collected using a Direct Linear Transformation procedure. After analyzing the kinematic variables in the 100m hurdle run, the following conclusion were obtained; Lee Yeon-Kyoung had to maintain constant stride lengths between hurdles and increase takeoff distance before clearance and shorter landing distance after clearance. She also had to hit the correct takeoff point in front of the hurdle and extend the lead leg at the moment of landing in order to minimize the loss of velocity. She had to sprint between hurdles as fast as possible over 8m/s and run powerful first stride and shortened third stride preparing for the following hurdle clearances.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.1
• /
• pp.11-17
• /
• 2013

The purpose of this study was to provide a fundamental information for enhancing 110m hurdlers' performance through conducting comparative biomechanical analysis between Skilled Group(SG) and Less-Skilled Group(LSG) those who are not in the first section of 110m hurdles. To persue the purpose of this study, total of 10 hurdlers participated. Then they were divided into two groups; SG: five hurdlers who have won awards with 14-second range at 2010 national track and field event, and LSG: five hudlers who did not win any awards with 15-second range. Three-dimensional motion analysis with 12 infrared cameras(Oqus 300, Qualisys) and 1 force plate(Type 9286AA, Kistler) was performed. From this study following conclusions were obtained. 1) For the overall runtime, SG revealed faster elapsed time than that of LSG. 2) At E4, LSG showed greater trunk angle than that of SG. 3) At E3 LSG revealed higher angular velocities than that of SG. 4) No significant differences was found for AP GRF between groups but LSG showed greater VGRF than that of SG.