• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.1
• /
• pp.63-76
• /
• 2003

Species composition and seasonal variations of shrimp caught in the adjacent waters Geomundo, Korea were studied using the monthly catch of beam trawl fishery from November 1998 to October 1999. During in the study period, a total of 700,765 shrimps consisting 36 species, 27 genus and 11 families were collected. The community was dominated by Palaemon gravieri, Parapenaeopsis tenellus, Solenocela melantho and Plesionika izumiae. The peak abundance of shrimp occurred in summer, and low abundance in winter and spring. Major species occurred in area A, B and C was P. gravieri, and P. tenellus, and P. izumiae and S. melantho, respectively. The number of individual and abundance showed in July, and low in November. It was noted that values of species diversity, dominance and evenness indices were high in adjacent water Geomundo and lower in adjacent water Chodo and Chodo-Sonjukdo. Analysis of dendrogram of the clustering showed that there were two distinct groups; Geomundo group and Chodo-Sonjukdo group.

• Journal of Korea Water Resources Association
• /
• v.40 no.6 s.179
• /
• pp.459-468
• /
• 2007

To estimate the groundwater recharge, the fully distributed parameter based model, MIKE SHE was applied to the Gyeongan-cheon watershed which is one of the tributaries of Han River Basin, and covers approximately $260km^2$ with about 49 km main stream length. To set up the model, spatial data such as topography, land use, soil, and meteorological data were compiled, and grid size of 200m was applied considering computer ability and reliability of the results. The model was calibrated and validated using a split sample procedure against 4-year daily stream flows at the outlet of the watershed. Statistical criteria for the calibration and validation results indicated a good agreement between the simulated and observed stream flows. The annual recharges calculated from the model were compared with the values from the conventional groundwater recession curve method, and the simulated groundwater levels were compared with the observed values. As a result, it was concluded that the model could reasonably simulate the groundwater level and recharge, and could be a useful tool for estimating spatially/temporally the groundwater recharges, and enhancing the analysis of the watershed water cycle.

• Journal of Preventive Medicine and Public Health
• /
• v.37 no.4
• /
• pp.300-305
• /
• 2004

Objectives : The exposure to particulate air pollution during the pregnancy has reported to result in adverse pregnancy outcome such as low birth weight, preterm birth, still birth, and intrauterine growth retardation (IUGR). We aim to assess whether prenatal exposure of particulate matter less than 10 (m in diameter ($PM_{10}$) is associated with preterm birth in Seoul, South Korea. Methods : We included 382,100 women who delivered a singleton at 25-42 weeks of gestation between 1998 and 2000. We calculated the average PM10 exposures for each trimester period and month of pregnancy, from the first to the ninth months, based on the birth date and gestational age. We used three different models to evaluate the effect of air pollution on preterm birth; the logistic regression model, the generalized additive logistic regression model, and the proportional hazard model. Results : The monthly analysis using logistic regression model suggested that the risks of preterm birth increase with PM10 exposure between the sixth and ninth months of pregnancy and the highest risk was observed in the seventh month (adjusted odds ratio=1.07, 95% CI=1.01-1.14). We also found the similar results using generalized additive model. In the proportional hazard model, the adjusted odds ratio for preterm births due to PM10 exposure of third trimester was 1.04 (95% CI=0.96-1.13) and PM10 exposure between the seventh month and ninth months of pregnancy was associated with the preterm births. Conclusions : We found that there were consistent results when we applied the three different models. These findings suggest that air pollution exposure during the third trimester pregnancy has an adverse effect on preterm birth in South Korea.

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.1-10
• /
• 2005

In this study, accelerated pavement tester(APT) was performed on long-life asphalt pavements that can save maintenance and user costs by increasing the design life twice longer than conventional asphalt pavements. Basic material testings are first conducted on a high modulus base(HMB) mixture developed in this study. Four different pavement sections including thin and thick conventional and thin and thick HMB courses are constructed to compare the load-carrying capacities and to investigate the fatigue and rutting performances using an accelerated pavement tester. Tensile strain values at the bottom of base courses under the various loading levels are measured. The tensile strain values of the HMB sections are lower than those of the conventional sections. It is observed from the APT performed on the thin pavement sections that no significant cracks are developed up to the 180,000 cycles of a wheel load. In terms of rutting, only 3mm of rutting is developed in the thick HMB section while 5.3mm of rutting is developed in the thick conventional section at the 90,000 cycles of the wheel load. The HMB material developed in this study can be successfully used in the long-life asphalt pavements because of its excellent fatigue and rutting performances. It is estimated from a series of structural analysis that the use of the HMB material instead of the conventional base materials may reduce the asphalt thickness at least 5cm because of its better load-carrying capacity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.202-210
• /
• 2015

Objectives: The purpose of this study was to examine clean room(C/R) structure, air conditioning and contamination control systems and to provide basic information for identifying a correlation between the semiconductor work environment and workers' disease. Methods: This study was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. The C/R structure and air conditioning method were investigated using basic engineering data from documentation for C/R construction. Furthermore, contamination parameters such as airborne particles, temperature, humidity, acids, ammonia, organic compounds, and vibration in the C/R were based on the International Technology Roadmap for Semiconductors(ITRS). The properties of contamination control systems and the current status of monitoring of various contaminants in the C/R were investigated. Results: 200 mm and 300 mm wafer fabrication facilities were divided into fab(C/R) and sub fab(Plenum), and fab, clean sub fab and facility sub fab, respectively. Fresh air(FA) is supplied in the plenum or clean sub fab by the outdoor air handling unit system which purifies outdoor air. FA supply or contaminated indoor air ventilation rates in the 200 mm and 300 mm wafer fabrication facilities are approximately 10-25%. Furthermore, semiconductor clean rooms strictly controlled airborne particles(${\leq}1,000{\sharp}/ft^3$), temperature($23{\pm}0.5^{\circ}C$), humidity($45{\pm}5%$), air velocity(0.4 m/s), air change(60-80 cycles/hr), vibration(${\leq}1cm/s^2$), and differential pressure(atmospheric pressure$+1.0-2.5mmH_2O$) through air handling and contamination control systems. In addition, acids, alkali and ozone are managed at less than internal criteria by chemical filters. Conclusions: Semiconductor clean rooms can be a pleasant environment for workers as well as semiconductor devices. However, based on the precautionary principle, it may be necessary to continuously improve semiconductor processes and the work environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.753-758
• /
• 2004

건천화란 하천이 건천이 되어가는 과정이라고 할 수 있다. 그러나 이의 정량적 접근이 어려운 이유는 건천이 되어가는 과정에 대한 현상을 지속적으로 관찰하기 어렵고, 순수한 자연현상이라기보다 인위적 요소가 간섭한 결과이기 때문이다. 본 연구는 건천이 되어가는 하천 중에서도 도시화에 의한 건천화의 영향이 큰 것으로 보이는 우이천 유역에 대해 건천화의 원인을 분석하여 몇 가지 결론과 대책을 제시하였다. 우이천은 유역면적 $27.67km^2$, 유로연장 11.75km의 비교적 좁은 면적 내에 인구 461,351명이 거주하고 주변 행정구역 총 인구가 604,282명인 지방2급하천이다. 유역 내 북부와 북서부의 산악지역을 통과하는 상류는 대부분 계류(溪流)로서 자연상태를 유지하고 있으나, 중${\cdot}$하류는 양안의 셋방, 복개, 직강화, 보 및 낙차공 등 인공구조물로 인해 하천형상이 크게 왜곡되어 있는 전형적인 도시하천유역이다. 본 연구는 우이천에 대한 건천화 원인분석을 위해 크게 4가지 방봅으로 접근하였는데 반분포형 유출모형인 TOPMODEL에 의한 장기유출분석, 수문${\cdot}$기상자료에 의한 분석, 인문${\cdot}$사회자료의 분석, 지하수위 분석 등이었다. 분석결과 우이천 유역과 같이 장기간에 걸쳐 도시화가 진행된 유역은 수문순환계의 왜곡이 돌이킬 수 없는 수준이므로, 적절한 건천화 방지대책의 방향은 건천화의 원인이 되는 인자를 제거함으로써 줄어든 유량을 회복하는 방안보다는 인위적이고 강제적인 방식으로 추가적인 하천수량을 확보하는 것이 타당하다 사료된다. 하천의 건천화는 하나의 주된 원인이 지배적일 수도 있지만 간접적인 영향이 많고, 하나의 원인이 다른 인자에 영향을 주어 연쇄적인 영향을 미칠 수도 있는 복잡한 현상이다. 따라서 다양한 각도에서 다양할 접근방식으로 방지대책을 수립하여야 할 것이다.적에 따른 임계지속기간과 유출량의 변화를 검토해 보았다.이를 각각의 경우의 해석해 결과와 비교${\cdot}$분석하였다. 후방추적 퍼프모형은 전방추적 퍼프모형에 비하여 사용된 퍼프수와 관계없이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유아기에 심근경색 및 허혈성 심근증 또는 선천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고 있다.교하여 유의한 차이가 관찰되지 않았다. 또한 HSP 환자군에서도 $IL1RN^{*}2$ allele 빈도와 carria

• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.30-41
• /
• 1987

The geometrical shape of a plow bottom may be the most important factor affecting the performance of a plow for a given soil and operating conditions. There are various designs of the Jaenggi (Korean plow) available commercially, which may be different from each other and from the plow (Western plow) in respect to the shape and performance. This study was intended to investigate the geometrical characteristics of Jaenggi. The coordinate digitizer equipped with 3 potentiometers was designed and manufactured for measurement of the shape of curved plane of moldboard and share. The digitizer was connected to a microcomputer having the data acquisition system. This device was used to analyze the plow bottoms of 5 differently-made Jaenggis and one cylindrical plow. The results of the study are summarized as follows: 1. It was possible to measure easily and quickly the curved plane of plow bottom and to plot the view on three major plans using the coordinate digitizer electrically connected to a microcomputer system. 2. The shape of five Jaenggi bottoms analyzed could be characterized by the cutting angle having the range of $33-42^{\circ}$, the maximum share-lift angle of $41-50^{\circ}$, and the setting angle of moldboard wing of $46-70^{\circ}$. The most critical difference of the shape factors between the Jaenggi and the plow was found in the maximum share-lift angle, the former was more than twice as much as the latter. 3. The analysis of the shape of Jaenggi bottoms showed that the share projections on 3 major plans had a varied triangle, which was quite different from that of plow bottom. Especially, it was analyzed that the shape of furrow slice for the Jaenggi had a skewed rectangle, leaving a considerable height of the ridge at the furrow bottom. 4. The dihedral angle was similar range of $30-85^{\circ}$ for the all bodies investigated, but the directional angle was somewhat different from each other. The difference in directional angle was $5^{\circ}$ for the plow, $20^{\circ}$ for the Jaenggi A and $30^{\circ}$ for the Jaenggi B. 5. Area of the spherical representation region was 0.0328 for the plow, 0.1194 for the Jaenggi A and 0.1716 for the Jaenggi B. This may indicate that the plow came close to a working surface and the Jaenggi A and the Jaenggi B departed from a working surface to a somewhat greater extent.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.158-163
• /
• 2018

Perilla (Perilla frutescens var.frutescens) is an annual plant of the Lamiaceae family, mainly grown for obtaining oil by press extraction after roasting the seeds. Oil yield is one of its important traits, but evaluating this yield is time-consuming, requires many seeds, and is hard to adjust to pedigrees in a breeding field. The objective of this study was to develop a method for selecting high-oil-yield lines in a breeding population without oil extraction. Twenty-three perilla cultivars were used for evaluating the oil yield and seed traits such as seed hardness, seed coat thickness, seed coat proportion and crude fat. After evaluation of the seed traits of 23 perilla cultivars, the ranges of oil yields, seed hardness, seed coat thickness, seed coat proportion, 100-seed weight, and crude fat were 24.68-38.75%, 157-1166 gf, $24-399{\mu}m$, 15.4-41.5%, 2.79-6.69 g, and 33.0-47.8%, respectively. In an analysis of correlation coefficients, the oil yield negatively correlated with seed length, seed width, the proportion of seed coat, seed hardness, and 1000-seed weight, but positively correlated with crude fat content. It was observed that as the seed coat proportion increased, the seed coat thickness, hardness, and 1000-seed weight also increased. Multiple linear regression (MLR) was employed to find major variables affecting the oil yield. Among the variables, traits crude fat content and seed coat proportion were assumed to be indirect parameters for estimating the potential oil yield, with respect to a significant positive correlation with the observed oil yield ($R^2=0.791$). Using these two parameters, an equation was derived to predict the oil yield. The results of this study show that various seed traits in 23 perilla cultivars positively or negatively correlated with the oil yield. In particular, crude fat and the seed coat proportion can be used for predicting the oil yield with the newly developed equation, and this approach will improve the efficiency of selecting prominent lines for the oil yield.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.109-115
• /
• 2016

A demand of high bearing capacity of piles to resist heavy static loads has been increased. For this reason, the utilization of large diameter PHC piles including a range from 700 mm to 1,200 mm have been increased and applied to the construction sites in Korea recently. In this study, in order to increase the flexural strength capacity of the PHC pile, the large diameter composite PHC pile reinforced by in-filled concrete and reinforcement was developed and manufactured. All the specimens were tested under four-point bending setup and displacement control. From the strain behavior of transverse bar, it was found that the presence of transverse bar was effective against crack propagation and controlling crack width as well as prevented the web shear cracks. The flexural strength and mid-span deflection of LICPT specimens were increased by a maximum of 1.08 times and 1.19 times compared to the LICP specimens. This results indicated that the installed transverse bar is in an advantageous ductility performance of the PHC piles. A conventional layered sectional analysis for the pile specimens was performed to investigate the flexural strength according to the each used material. The calculated bending moment of conventional PHC pile and composite PHC pile, which was determined by P-M interaction curve, showed a safety factor 1.13 and 1.16 compared to the test results.

• Journal of Gifted/Talented Education
• /
• v.22 no.3
• /
• pp.757-777
• /
• 2012

Peer relationships in young students' communities are one of the important factors influencing the cognitive and affective domains of learning. Moreover, students who join the special program for gifted students possess differential peer relationships from the students in general classes. This study aims to explore the differences of 5th grade five science-gifted students' peer relationships between students in special classes for gifted students and general classes. Five students in the special program for gifted students, managed by the Office of Education in a southern city, participated in this study. Social network analyses were utilized to explore participants' peer relationships; the students' homeroom teacher was interviewed to explore the contextual and in-depth characteristics of gifted students' peer relationships. The results illustrated four cases of peer relationships: (1) smart loner (2) my study mate (3) I'm the best in my class, and (4) a good friend anywhere. This study identified that the gifted students possessed diverse peer relationships in both the special program and general classroom. In addition, this study suggests that the program for gifted students needs to be specially designed based on the gifted students' peer relationship.