• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.89-94
• /
• 2018

• Journal of Internet Computing and Services
• /
• v.18 no.4
• /
• pp.27-34
• /
• 2017

In this paper, the analysis of mobile augmented reality service using 5G network are provided. First of all, the introduction and required performance of mobile augmented reality(MAr) service are provided. After that, 5G network key features, target performance, and network architecture are analyzed. At the end, the additional network entity and functions for the realization of mobile augmented reality service are proposed. The mobile augmented reality service time. At the end, the service delay in existing LTE system and proposed 5G MAr system by using real device and network parameters.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.4
• /
• pp.281-292
• /
• 2016

In this research, 10 specimens of FCAW welding with positions of 1G and 3G were tested to confirm the weldability, welding positions, and welded joint performance of 60mm HSA800 steel. The test results showed that FCAW 1G and 3G satisfied HSA800 steel's KS and the criteria for homogeneity of strength, indicating a good weld zones. However, according to the tensile test results of weld zone, 3G position FCAW welding requires improvement of welding techniques and methods.

• Architectural research
• /
• v.20 no.4
• /
• pp.121-128
• /
• 2018

Given the barriers to implement green building rating systems, Building Information Modeling (BIM) was suggested as an effective solution integrating information into one model and saving substantial time to facilitate certification process. Synergies between BIM and Leadership in Energy and Environment Design (LEED), the most widely used rating system, have been researched for a few decades. This paper demonstrates literature review about the development of integration between BIM and LEED. The research focuses on synergies between BIM and Green Standard for Energy & Environmental Design (G-SEED) in Korea, as one of important strategies to mitigate greenhouse gas emission. The research compares LEED and G-SEED related items based on evaluation contents. The result manifests G-SEED and LEED share many common items in different degrees. Therefore, it is entirely possible for G-SEED and BIM to adapt same developing mode of LEED and BIM. Moreover, the study measures the potential of BIM in application process of G-SEED certification by investigation of credits in LEED and G-SEED can be earned by BIM. The results of paper indicate the documentation support LEED and G-SEED may be prepared directly, semi-directly and indirectly via sustainability analyses software in BIM.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.207-221
• /
• 2005

The proliferation of wireless local area networks (WLANs) offering high data rate in hot spot area have spurred the demand for possible WLANs and third-generation (3G) cellular network integration solutions as the initiative step towards 4G systems. This paper provides a novel architecture for seamless location-aware integration of WLANs into 3G cellular networks and also an analysis for the efficient handover techniques. We introduce location as a key context in secure roaming mechanism for context-aware interworking in 4G systems. The fast secure roaming with location-aware authentication is implemented at an entity called location-aware service (LAS) broker that utilizes the concepts of direction of user and pre-warming zone. The location-ware interworking architecture supports seamless roaming services among heterogeneous wireless networks including WLANs, wireless metropolitan area networks (WMANs), and 3G cellular networks. This paper also includes a description of procedures needed to implement efficient mobility and location management. We show how the LAS broker with pre-warming and context transfer can obtain significant lower latency in the vertical handover.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.4
• /
• pp.45-56
• /
• 2016

In this study, an analysis has been conducted on the evaluation criteria of current G-SEED(Green Standard for Energy and Environmental Design) and on the 78 buildings, certified by G-SEED, for 3 years from November, 2012 to November, 2015. Based on the results of this analysis, four issues are driven and proposed hereinafter. Issue 1 : Nowadays, the psychological proportion of landscape architecture in building is getting greater than ever so that it shows reliable reduction of carbon dioxide. Therefore, so far as the eight kinds of buildings are concerned, the evaluation items of G-SEED must include those of landscape architecture mandatorily through its enlargement. Issue 2 : It is undesirable factor that inhibits precise evaluation on landscaping area to let other areas appraise landscape architecture because it requires outstanding professionalism. So, G-SEED should not only ensure landscaping professionalism for the correct evaluation but also let landscape area participate in assessing other areas. Issue 3 : Many previous researches turned out that landscape planting technique has excellent effect on saving energy and reducing temperature of buildings. Thus, landscape planting technique of landscape area is required to be one of the evaluation items of energy sector. Issue 4 : Tree management also has to be newly included as one of the evaluation factor for the maintenance relating to the landscape architecture. G-SEED, enacted and enforced by the Green Building Creation Support Act in 2013, surely is effective system to reduce carbon dioxide in buildings. This is a special Act in its nature that is superior to Construction Law and must be observed by all means to construct buildings. Under the umbrella of this legal system, various of researches and products are contributing to creating new jobs in construction area. However, it is a well-known fact that landscape architecture area has shown less interest on this Act than that of construction area. In conclusion, it is necessary that landscape industry should conduct continuous researches on G-SEED and pay more attention to the Act enough to harvest related products and enlarge its work area.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.211-227
• /
• 2012

To implement a combined discrete event and discrete time simulation such as submarine diving simulation in a distributed environment, e.g., in the High Level Architecture (HLA)/Run-Time Infrastructure (RTI), a HLA interface, which can easily connect combined models with the HLA/RTI, was developed in this study. To verify the function and performance of the HLA interface, it was applied to the submarine dive scenario in a distributed environment, and the distributed simulation shows the same results as the stand-alone simulation. Finally, by adding a visualization model to the simulation and by editing this model, we can confirm that the HLA interface can provide user-friendly functions such as adding new model and editing a model.

• Wind and Structures
• /
• v.38 no.4
• /
• pp.261-275
• /
• 2024

Before performing an experimental study on the downburst-generated wave, it is necessary to examine the scale effects and corresponding corrections or compensations. Analysis of similarity is conducted to conclude the non-dimensional force ratios that account for the dynamic similarity in the interaction of downburst with wave between the prototype and the scale model, along with the corresponding scale factors. The fractional volume of fluid (VOF) method in association with the impinging jet model is employed to explore the characteristics of the downburst-generated wave numerically, and the validity of the proposed scaling method is verified. The study shows that the location of the maximum radial wind velocity in a downburst-wave field is a little higher than that identified in a downburst over the land, which might be attributed to the presence of the wave which changes the roughness of the underlying surface of the downburst. The impinging airflow would generate a concavity in the free surface of the water around the stagnation point of the downburst, with a diameter of about two times the jet diameter (D_jet). The maximum wave height appears at the location of 1.5D_jet from the stagnation point. Reynolds number has an insignificant influence on the scale effects, in accordance with the numerical investigation of the 30 scale models with the Reynolds number varying from 3.85 × 10⁴ to 7.30 × 10⁹. The ratio of the inertial force of air to the gravitational force of water, which is denoted by G, is found to be the most significant factor that would affect the interaction of downburst with wave. For the correction or compensation of the scale effects, fitting curves for the measures of the downburst-wave field (e.g., wind profile, significant wave height), along with the corresponding equations, are presented as a function of the parameter G.

• Information and Communications Magazine
• /
• v.32 no.9
• /
• pp.17-23
• /
• 2015

This paper presents design methodologies for 5G architecture ensuring lower latency than 4G/LTE. Among various types of 5G use cases discussed in standardization bodies, we believe mobile broadband, massive IoT(Internet of Things) and mission-critical IoT will be the main 5G use cases. In particular, a mission-critical IoT service such as remote controlled machines and connected cars is regarded as one of the most distinguished use cases, and it is indispensable for underlying networks to support sufficiently low latency to support them. We identify three main strategic directions for end-to-end network latency reduction, namely new radio access technologies, distributed/flat network architecture, and intelligent end-to-end network orchestration.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.121-130
• /
• 2012

In this paper, the structure of the Aladdin system was modeled by Petri nets for performance evaluation of 40G bps class Aladdin system which was developed in ETRI as the high-speed DDoS defensive tool. The efficiency analysis of the system architecture according to the input traffic of the Aladdin system was performed based on the modeling.