• Korea Multimedia Society
• /
• v.17 no.2
• /
• pp.33-39
• /
• 2013

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.746-752
• /
• 2009

In this paper, we deal with the development of an optimal design program for a triple-band PTFA(Planar Inverted-F Antenna) of 433 MHz, 912 MHz and 2.45 GHz by using evolution strategy. Generally, the resonance frequency of the PIFA is determined by the width and length of a U-type slot used. However the resonance frequencies of the multiple U slots are varied by the mutual effect of the slots. Thus the optimal width and length of U-type slots are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonance frequencies of the triple-band PIFA yielded by the optimal design program are 430 MHz, 910.5 MHz and 2.458 GHz that show a good agreement to the design target values.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.157-158
• /
• 2008

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencys, 433MHz and 2.45GHz for the radiation characteristics and input impedance matching as well. The reflection factor is lower than 15dB and a good directivity higher than 3dB is achieved for both frequency.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.264-265
• /
• 2007

In this paper, we deal with a hybrid dual band low noise amplifier with tunable matching circuits for a Radio Frequency Identification(RFID) reader operating at 433MHz and 912MHz. The tunable matching circuit consists of the microstrip line, SMD component and varactor. Simulation results show that the S21 parameter is 17dB and 7.91dB at 433MHz and 912MHz, respectively. The noise figure is also determined to 3.56dB and 5.58dB at the same frequencies with a power consumption of 19.36mW.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.135-140
• /
• 2008

In this paper, the spiral antenna with the center frequencies of 315MHz, 433MHz, and 447MHz for RKE system of a vehicle is designed on PCB. The antenna is microstrip line-fed, and applied PIFA concept near the feeding part to easily tune center frequency and input impedance. The PIFA-type spiral antenna with the size of $30mm{\times}20mm$ is designed on printed PCB by considering the effect of circuits and components on PCB, ECU case and vehicle body. Also chip inductor inserted dual-band spiral antenna of 315MHz and 447MHz is designed. We found that the antenna designed on PCB satisfied the antenna specifications through measurement and field test.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.768-773
• /
• 2010

In this paper, we study on an optimal design of a triple-band PIFA (Planar Inverted-F Antenna) of 433 MHz, 912 MHz and 2.45 GHz by using evolution strategy. Generally, the resonant frequency of the PIFA is determined by the width and length of a U-type slot used. However the resonant frequencies of the multiple U slots are varied by the mutual effect of the slots. Thus the optimal width and length of U-type slots are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonant frequencies of initial model are 439.5 MHz, 981.5 MHz and 2.563 GHz. However, the resonant frequencies of the triple-band PIFA yielded by the optimal design program are 430.5 MHz, 907 MHz and 2.4515 GHz. Measured resonant frequencies are 433.5 MHz, 905.5 MHz and 2.454GHz, which show a good agreement with the simulation results.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.343-346
• /
• 2005

유비쿼터스 시대의 도래로 인해 많은 IT업체는 유비쿼터스 핵심기술을 기반으로 발전하고 있다. 이러한 유비쿼터스 핵심기술의 상당부분은 무선통신기술 RF를 이용한 것이며 이를 활용하여 RFID 시스템 및 Ubiquitous Sensor Network 등을 구축할 수 있다. 본 논문에서는 이에 적합한 400/800MHz ISM/SRD 밴드대역을 사용하는 무선 트렌시버 단일 칩인 CC1020을 이용하여 하드웨어를 구성 하였다. CC1020칩을 사용하면 저전력, 고감도, 적은 주변회로 구성 등 많은 이점이 있으며 주파수원 고정과 필터링 및 전원공급상태 그리고 PC와의 interface등의 하드웨어를 쉽게 구현할 수 있다. 따라서 이러한 각 주변회로 구성에 대해 설명하고 실제 구현을 통해 DATA의 송수신실험을 통해 하드웨어의 특성을 확인 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.869-876
• /
• 2001

In modern wireless communication, it has been regarded as a important problem for the spectrum efficiency to utilize the limited frequency-resource efficiently. In addition, the system architecture has been designed for low cost, low power consumption and ultra-lightweight. In this paper, we directly modulated the BCPFSK with a superior spectrum efficiency using the DDS and applied the direct conversion to the system architecture. Finally, we designed a transceiver which has the 433 MHz BCPFSK output and evaluated the system performance. In the measured result, we know that as for spectrum and the power efficiency, BCPFSK method is better than conventional one. Also, the results of the designed system is 433.92 MHz in center frequency and about 33 dBc in carrier suppression ratio. And we get the better results in local oscillator leakage and the spurious of the ISM out-band the same as -69dBc and under 60dBc.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.215-218
• /
• 2009

In this paper, Dual-band bandpass filter studied design using Parallel Coupled SIR(Stepped Impedance Resonator). This Dual-band bandpass filter design SIR of half-wavelength by Parallel-coupled type that is available to RFID system and Changed structure in Meander form by size reduce. Because seen Dual-band bandpass filter is designed so that is applicable for frequency 433MHz and 2.45GHz of RFID system is very wide distance between two pass-band, establish 433MHz by fundamental frequency and controlled 2.45GHz by 2st spurious resonance frequency bandstop filter of 1st spurious resonance frequency and Parallel coupled SIR Combine to remove 1st spurious resonance frequency.

• Electronics and Telecommunications Trends
• /
• v.20 no.3 s.93
• /
• pp.67-80
• /
• 2005

RFID 기술은 각 사물에 전자태그를 부착하고, 사물의 고유 ID를 무선으로 인식하여,해당 정보를 수집, 저장, 가공, 추적함으로써 사물에 대한 측위, 원격 처리, 관리 및 사물간 정보교환 등의 서비스를 제공하는 기술이다. RFID 기술은 칩, 태그, 리더, 미들웨어 및 응용 서비스 플랫폼으로 구성되고 유무선 통신망과 연동되어서 사용된다. RFID기술은 사람 중심(anyone)에서 사물 중심(anything)으로 정보화의 지평을 확대시킬수 있는 핵심 기술로 부각되고 있으며, 유비쿼터스 센서 네트워크로 발전될 전망이다. 본 고에서는 900MHz 대역을 이용하는 수동형 RFID 시스템과 433MHz 대역을 이용하는 능동형 RFID 시스템의 주요 구성 요소와 관련 기술 동향 및 전망을 알아본다.