• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.90-90
• /
• 2017

생력화를 위한 구기자의 수확 기계화는 열악한 수확작업환경을 쾌적한 작업환경으로 개선하고 노동력 감소, 생산비 절감을 할 수 있다. 관행 손 수확과 진동 고리형 수확기 방법보다 높은 작업 능률 향상으로 영농규모의 확대 촉진 및 안정적인 영농 구조를 구축하여 재배농가의 생산비를 절감하여 경쟁력을 높일 수 있으며, 기존 인력에 의존하였던 수확작업을 기계화함으로서 전업농 및 대단위 경작이 가능하게 함으로서 국내에서 생산한 양질의 구기자를 국민에게 안정적으로 제공할 수 있다. 따라서, 본 연구는 구기자 수확작업의 생력화를 위하여 개발 보급된 수목형의 재배법 특성을 분석하고 이를 토대로 타격장치를 적용한 보행형 구기자 수확기를 개발하는데 목적이 있다. 수목형 구기자나무의 분지에 착과되어 있는 숙과를 주행하면서 탈과 할 수 있는 탈과 장치를 제작하기 위하여 타격형 탈과 장치를 3D 모델링 작업(Inventor V.11, Autodesk, USA) 후 시작기를 제작, 구기자 수확 시작기는 주행부, 타격장치, 집과부, 분지유인부로 구성하였다. 구기자 수확 시작기의 최대 높이는 형태학적 특성을 토대로 타격봉의 높이를 900 mm 이하로 제한하였으며, 조향장치의 높이는 800 mm로 하였다. 주행부는 구기자 재식 조사결과를 이용하여 고랑 폭 1,500 mm 이하에서 자유롭게 전 후진 이동이 가능하고 경사로 등을 주행 시에도 안전성을 높이기 위해 자동브레이크 기능이 있으며 타격장치의 타격 봉은 알루미늄 재질로 지름 100 mm, 길이 400 mm로 설계 제작하였으며, 구기자 분지 타격 시 분지와 타격 봉이 수직 상태로 타격이 가능하도록 제작, 집과장치는 포장의 두둑, 고랑은 일괄 표준화가 되어 있지않아 청양구기자시험장에서 측정한 재배법을 바탕으로 설계된 수집부 프레임의 적용범위는 폭 450 mm, 길이 720 mm, 높이 1,500 mm를 집과 범위로 하여 설계 제작하였다. 타격 방식을 적용한 구기자 수확기 성능평가 결과 조숙기에 30초 이상의 탈과 시 87.5 % 이상 탈과는 어려울 것으로 판단되었으며, 성숙기에는 타격시간에 관계없이 92 %의 매우 우수한 탈과율이 나타났다. 성숙기의 주행속도 48 m/h 일 때 탈과율과 집과율은 89 %, 92 %로 나타났다.단위작업시간당 최대 수확 능력은 관행작업 2.9 kg/hr, 진동고리형 수확기 5.2 kg/hr, 타격방식을 적용한 구기자 수확기는 최소 7.6 kg/hr, 최대 24.1 kg/hr로 관행작업과 비교하여 주행속도와 시기별 최소 2.6배, 최대 8.3배의 작업 성능 차이가 나타났다. 재배양식에서는 기계화 수목형이 적합한 것으로 나타났고, 타격방식을 적용한 보행형 구기자 수확기를 이용하여 수형별 시간대별 수확성능을 시험한 결과 우수한 결과가 나타났다. 이에 따라 구기자 재배 농가에 기계화수목형 재배법을 보급하고 타격방식을 적용한 구기자 수확기를 이용하면 작업환경 개선과 노동력, 인건비 절감을 통한 영농규모의 확대 촉진 및 안정적인 영농 구조로 구기자 경쟁력 제고를 할 수 있을 것으로 판단되어진다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.82-92
• /
• 2013

This study has investigated naturally occurring radioactive materials (N.O.R.M; $^{238}U$, $^{222}Rn$) for 353 drinking groundwater wells in metamorphic rock areas in Korea. Uranium concentrations ranged from N.D (not detected) to 563.56 ${\mu}g/L$ (median value, 0.68 ${\mu}g/L$) and radon concentrations ranged from 108 to 11,612 pCi/L (median value, 1,400 pCi/L). Uranium and radon concentrations in the groundwater generally are similar to USA with similar geological setting. Uranium concentrations in 9 wells (2.6%) exceeded 30 ${\mu}g/L$, which is the maximum contaminant level (MCL) by the US environmental protection agency (EPA), radon concentrations in 46 wells (13%) exceeded 4,000 pCi/L, which is the Alternative MCL (AMCL) by the US.EPA. The log-log correlation coefficient between uranium and radon was 0.32. The correlation coefficient between uranium and pH was 0.12 and the correlation coefficient between radon and temperature was -0.01. The correlation coefficient between uranium and $HCO_3$ was 0.09 and the correlation coefficient between uranium and Ca was 0.11. The median value of uranium was high Chung-Buk (1.78 ${\mu}g/L$), Gyeong-Buk (1.37 ${\mu}g/L$), In-Cheon (1.06 ${\mu}g/L$) for each province. On the other hand, the median value of radon was high In-Cheon (2,962 pCi/L), Chung-Buk (2,339 pCi/L), Jeon-Buk (2,165 pCi/L) for each province. Jeon-Buk for log-log correlation coefficient is the highest (0.63) among provinces.

• 한국토양비료학회지
• /
• 제49권6호
• /
• pp.795-806
• /
• 2016

This study was conducted to improve the continuous techniques for international competitiveness of ginseng industry to Korea-China FTA negotiation and conclusion, and provide the basic information for ginseng industry development of Korea. It was carried out the visiting of the northeastern three provinces (Jilin, Liaoling and Heilongjang) in China for 3-year from 2014 to 2016 and observed the farmers' fields of ginseng cultivation with soil environmental status. The types of ginseng cultivation could be observed in small scales of 0.5~3.0 ha, in middle scales of 4.0~10.0 ha and in large scales of 30~700 ha with the kinds of imhasam, Chinese ginseng, Korean ginseng and western ginseng. Also ginseng was cultivated in newly reclaimed land of forest in two types of direct seeding and transplanting of ginseng seedlings. The field beds of ginseng growing were covered with vinyl films in arch design of 100~130 cm height and vinyl was painted in spraying with blue, green and yellow colours for shading. It was investigated in status of the physico-chemical properties of soils. The physical information on the field soils were silt loam, loam and sandy loam in soil textures, and some plain in low slope, some alluvial fan or local valley in forest of land topography. Soil pH ranged within 5.0~5.2, soil EC was $0.93{\sim}3.78dS\;m^{-1}$, organic matter was $37{\sim}35g\;kg^{-1}$, nitrate nitrogen $63{\sim}490mg\;kg^{-1}$, available $P_2O_5$ $55{\sim}163mg\;kg^{-1}$, and in exchangeable cations, K was 0.30~0.98, Ca was 6.5~14.0, Mg was $1.1{\sim}5.3cmol_c\;kg^{-1}$ in ranges. Farmers used the fertilizer for ginseng cultivation in 10~11 t of compost, $200{\sim}400kg\;ha^{-1}$ of complex fertilizer and $750kg\;ha^{-1}$ of oil cakes. The northeastern three provinces of China can use the newly lands with large areas of ginseng cultivation in soil sickness by continuous cropping. and the soil basic fertility is batter than that of Korean in standard guide of ginseng cultivation soil.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.316-321
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.275-281
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권4호
• /
• pp.543-548
• /
• 2002

Fresh elephant grass was replaced by urea treated rice straw (UTRS) to evaluate the effects on milk production of crossed lactating cows. A total of 16 crossbred F1 cows (Holstein Friesian ${\times}$ Vietnamese Local Yellow), with a body weight of about 400 kg and lactation number from three to five, were used in the experiment. The experimental cows were blocked according to the milk yield of the previous eight weeks and divided into 4 homogenous groups. The experiment was conducted with a Latin Square design with 4 treatments and 4 periods. Each period was 4 weeks, with 2 weeks of feed adaptation and 2 weeks for data collection. The ratio of concentrate to roughage in the ration was 50:50. All cows were given constant amounts of elephant grass dry matter (DM), with ratios of 100% grass without UTRS (control treatment 100G), and 75% grass (75G), 50% grass (50G) and 25% grass (25G) with ad libitum UTRS. Daily total DM intake on 100G, 75G, 50G and 25G was 12.04, 12.31, 12.32 and 11.85 kg, and the daily ME intake was 121.6, 121.5, 119.4 and 114.3 MJ, respectively. The daily CP intake was similar for all treatments (1.85-1.91 kg). There was a difference (p<0.05) in daily milk yield between the 25G and the 100G and 75G (11.7 vs. 12.6 and 12.5 kg, respectively). Milk protein concentration was similar for all treatments, while a tendency to increased milk fat concentration following the increase of UTRS ratio was observed. The cows gained 4-5 kg body weight per month and showed first oestrus 3-4 months after calving. The overall feed conversion for milk production was not affected by ratio of UTRS in the ration. It is concluded that replacement of green grass by UTRS with a ratio of 50:50 for crossbred lactating cows is as good as feeding 100% green grass in terms of milk yield, body weight gain and feed conversion. UTRS can preferably replace green grass in daily rations for crossbred dairy cows in winter to cope with the shortage of green grass, with the ratio 1:1.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.360-360
• /
• 2017

Morphological characteristics indicating agronomic features and yield components (trunk length, trunk diameter, thickness of bark, pith density, dry-matter percentage of pith and starch concentration in pith) of sago palms (Metroxylon sagu Rottbøll) were compared between the 27 populations grown in the islands in Southeast Asia (West Sumatra, South Sumatra, West Java, Southeast Sulawesi, Ternate, Halmahera and Seram in Indonesia) and the 20 populations grown in Melanesia (West Papua in Indonesia, East Sepik and New Ireland island in Papua New Guinea). The average starch yield calculated based on the yield components was $310kg\;plant^{-1}$ and $244kg\;plant^{-1}$ in the islands in Southeast and Melanesia, respectively. The variation of starch yield in Melanesia (CV: about 80%) was larger than that in the islands in Southeast Asia (CV: about 60%). The difference in starch yield in the islands in Southeast Asia was mainly attributed to the trunk diameter breast height and the dry-matter percentage of pith. In contrast, the differences in trunk length and dry-matter percentage of pith mainly accounted for the difference in starch yield in Melanesia. The sago palms in the islands in Southeast Asia had a comparatively thick and short trunk and those in Melanesia had a comparatively thinner and longer trunk. However, the average pith dry-matter yield was almost same level as $400kg\;plant^{-1}$ in both the islands in Southeast Asia and Melanesia. The difference in starch yield between the two areas was attributed to the difference in starch concentration in pith, 77% and 58% in the islands in Southeast Asia and Melanesia, respectively.

• 한국임상약학회지
• /
• 제6권2호
• /
• pp.19-23
• /
• 1996

Carbamazepine is an anticonvulsant drug that has been shown to be as effective as phenytoin or phenobarbital in treatment of grand mal and complex partial seizures and is also approved as the drug of choice for treatment of the pain associated with trigerminal neuralgia. And the therapeutic or toxic effects of carbamazepine are better related to plasma concentration than to dosage, which can be attributed to interindividual variability in the pharmacokinetics. A slow rate of carbamazepine dissolution in the gastrointestinal tract is believed to be the cause of its relatively slow and erratic rate of absorption. For these reasons pharmacokinetic evaluation of newly formulated carbamazepine is neccessary. In this study, the bioequivalence in carbamazepine between the $TegretoI^{TM}$ CR tablet (Geigy Co.) and $Carmazepine^{TM}$ CR tablet (Myung In Co.) was evaluated. 12 normal volunteers (age $21\~27$ years old) was divided into two groups, and a randomized cross-over study was employed. The pharmacokinetic parameters ($C_{max},\;T_{max}$ and AUC) obtained of oral administration of each formulatim of carbamazepine 400 mg were evaluated and ANOVA was utilized for the statistical analysis of parameters. $C_{max}\;is\;8.26{\pm}3.1{\mu}g/ml\;(C.V.\;37.3\%)\;in\;TegretoI^{TM}\;and\;9.39\{pm}2.9{\mu}g/ml\;(C.V.\;30.5\%)$ in $Carmazepine^{TM},\;T_{max}\;is\;28.0{\pm}5.9\;hrs(C.V.\;21.1\%)$ in $Tegretol^{TM}\;and\;24.0{\pm}7.2\;hrs(C.V.\;30.2\%)$ in $Carmazepine^{TM}$ and AUC is $786.4{\pm}360.5{\mu}g{\cdot}hr/ml\;(C.V.\;45.8\%)$ in $TegretoI^{TM}\;and\;792.8{\pm}228.6{\mu}g{\cdot}hr/ml\;(C.V.\;28.8\%)$ in $Carmazepine^{TM}$, respectively. As the result of the data, two formulations are bioequvalent, and the lower C.V. of $Carmazepine^{TM}$ in every individual can be merit.

• 한국ITS학회 논문지
• /
• 제9권6호
• /
• pp.43-53
• /
• 2010

'97년 전국 5개 지방경찰청 32개 지점에 무인과속과속단속시스템의 도입으로 교통사고 발생 건수와 사망자수를 현저하게 감소시키는 효과를 가져와 지속적으로 확대 설치할 예정에 있다. 2010년 7월말 현재 4,495대를 설치 운영하고 있다. 대교, 터널 및 경사구간 등 위험도로구간에서는 치사율이 일반도로부의 3배 이상 높게 나타나 연속적인 속도관리가 필요하다. 그러나 무인과속단속시스템은 한 지점의 속도만으로 과속을 단속하는 시스템으로 단속지점에서만 속도를 줄이는 캥거루 효과가 발생하고 있어 연속적인 속도감소 효과를 기대할 수 없다. 따라서 위와 같은 연속적인 위험이 존재하는 도로구간에서는 교통사고 예방을 위해서는 위험구간의 평균속도로 과속차량을 단속하는 무인구간속도위반단속시스템 도입이 필요하게 되었다. 이에 본 논문에서는 무인구간속도위반단속시스템과 무인과속단속시스템 설치구간에서의 운전자 운행 특성인 캥거루 효과를 분석하고, 또한 제한속도 준수를 위한 두 시스템에 효과성을 검토하기 위하여 데이터를 수집하고 통계적인 분석을 실시하였다. 그 결과 무인구간속도위반단속시스템에서는 캥거루효과가 발생하지 않았고, 무인과속단속시스템에서만 캥거루효과가 발생하였다. 이러한 캥거루효과에 의한 차량 감속은 약 400m 전방에서 감속을 시작하는 것으로 분석되었다. 그리고 무인구간속도위반단속시스템의 평균속도가 무인과속단속시스템 보다 약 35km/h 낮은 것으로 분석되었다. 결론 적으로 무인구간속도위반단속시스템이 캥거루효과도 없을 뿐만 아니라 제한속도 준수에도 효과적인 것으로 검증되었다.

• 콘크리트학회논문집
• /
• 제25권6호
• /
• pp.657-665
• /
• 2013

이 연구는 알칼리 활성 슬래그(alkali-activated slag, AAS) 결합재를 이용하여 자기충전성을 갖는 콘크리트 개발을 위한 기초 연구로서 자기충전 콘크리트에 사용될 AAS 결합재 및 고성능 감수제의 유동성능 평가를 통해 선정하고, 선정된 결합재 및 고성능 감수제를 사용하여 자기충전 콘크리트를 배합한 후 굳기 전 콘크리트의 유동특성을 평가하였다. 높은 pH에서 폴리카르본산계 고성능 감수제의 성능이 저하됨에 따라 비교적 강도가 낮은 약알칼리성 활성화제를 사용한 AAS 결합재를 선정하였다. 시험 결과 일본토목학회(JSCE) 기준인 고유동성, 재료분리 저항성, 간극 충전성은 대부분 만족시켰으나, AAS 페이스트의 기본점성이 OPC에 비해 높은 이유로 유럽통합기준의 간극 통과성은 만족시키지 못했다. 하지만, AAS 결합재를 이용하면 증점제의 사용 없이 재료분리가 발생되지 않는 자기충전 콘크리트 제조가 가능함을 확인하였다. 이 연구는 AAS 결합재를 이용한 자기충전 콘크리트 개발의 기초연구로서 앞으로 현장적용이 가능한 AAS 자기충전 콘크리트 개발을 위해 더 높은 강도의 고유동 결합재와 간극 통과성을 높이기 위한 콘크리트 배합비의 연구가 필요하다.