• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.901-907
• /
• 2001

Magnetite was synthesized using $0.2M-FeSO_4{\cdot}7H_{2}O$ and 0.5 M-NaOH by air oxidation method for carbon dioxide decomposition to carbon. The carbon dioxide decomposition was successfully carried out after reduction of ${Fe_3}{O_4}$ for 2 hrs using hydrogen gas. The carbon dioxide decomposition at 325, 350, 375, 400, $425^{\circ}C$, 88% was the highest at $350^{\circ}C$ and the activation energy of ${Fe_3}{O_4}$ in carbon dioxide decomposition was 30.96 kJ/mol. After $CO_2$ decomposition, the carbon of surface of catalyst reacted with hydrogen produced methane.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.429-433
• /
• 2009

Since the "Low Carbon, Green Growth" as a social requirements is attracted public attention, the policies and investments of the railway which have been less estimated than road is re-considered. Since the starting the commercial service (2004. April), the KTX have been operated successfully while transport passengers over 100million for years. And also the project for development of KHST (Korea High Speed Train ; G7) had been accomplished with a good result, the first trainset of KTX-II which base on G7 project was manufactured and testing now. On the other hand, the world's technology of the high speed train is more faster, and changing to a distributed traction system. To catch up the world's leading technology, the HEMU(High-speed Electric Multiple Unit) project will secure new technology and aims to promote the technology of domestic high-speed train. The authors indicates the result of detail review such as a curve, slope of the track and electrical dead section of the catenary to test at 400kph and also the performance simulation of the developed rolling stock in this paper. As the result, the authors devise the test scenario to perform a maximum speed test (stability at max. speed, acceleration & deceleration etc) with the restricted conditions such as track length, track available time etc by considering above result.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1434-1436
• /
• 2002

The 400KN suspended insulator was fabricated with feldspar, quartz, clay and $Al_2O_3$ wt% for extra high voltage. These materials were grinded with ball milling for 25 hours after mixing them. The grinded materials were sintered at $1300^{\circ}C$ for 50 minutes in the tunnel kiln after mading with jiggering method. The sintered density of specimen was reached at 97% in comparison with that of theory. The specimen had the characteristic of temperature rise with the increase of electrical losses. Also, the flexural strength and the fracture toughness of sintered parts respectively were 1658 kg/$cm^2$ and 2.3 $MPa{\cdot}m^{1/2}$.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.2
• /
• pp.174-178
• /
• 1999

An anthocyanin-deficient tomato (Lycopersicon esculentum Mill.) strain, H957, shows an unusual tolerance to low phosphorus (P). To investigate whether the tolerance originates from a tissue/cellular strength, plant tissue culture procedure was employed which facilitate to characterize the tolerance independent of morphological features. The tolerance was analyzed by comparing H957 against H883, its maternal wild type, while each explant was co-cultured on minimal P media. Comparisons were made in fresh weight, dry weight, callus and shoot formation, mineral contents, and P utilization ratios at $0-400{\cdot}\bar{I}MP$, . Growth of the two strains was severely impaired at 0 and $12.5{\cdot}\bar{I}MP.\;At\;25-200{\cdot}\bar{I}MP$, however, H957 consistently showed a greater fresh and dry weight than H883. Shoot onset of H957 was less delayed than H883 compared to optimal P conditions. H957 tissue contains an overall lower P concentration than H883. These observations indicate that H957 may tolerate to low P by its tissue or cellular strength in P utilization side from its morphology.

• Applied Biological Chemistry
• /
• v.32 no.4
• /
• pp.344-349
• /
• 1989

Eleven lignan compounds in fruits of Schisandra chinensis BAILLON were identified by gas chromatography/mass spectrometry(GC/MS). The GC/MS conditions were as followed: the GC column used was SPB-1 fused silica capillary $(0.25mm\;id{\times}30m,Supelco)$ and the column oven temperature was programmed from $200^{\circ}C$ to $300^{\circ}C$ at the rate of $4^{\circ}C$ per minute; the MS ionization voltage was 70eV (EI mode). The compounds identified were gomisin J $(M^+;\;388)$, deoxyschizandrin$(M^+;\;416)$, gomisin N $(M^+;\;400)$, schizandrin$(M^+;\;432)$, wuweizisu C $(M^+;\;384)$, gomisin A $(M^+;\;416)$, angeloylgomisin H $(M^+;\;500)$, tigloylgomisin H $(M^+;\;500)$, angeloylgomisin Q $(M^+;\;530)$, gomisin B $(M^+;\;514)$ and benzoylgomisin H $(M^+;\;522)$, peaks of which were separated well on the GC chromatogram.

• Resources Recycling
• /
• v.3 no.1
• /
• pp.9-16
• /
• 1994

Fine cobalt metal powders was produced from domestic Stellite scrap by decomposing it with molten sodium hydroxide. Complete decomposition of the scrap could be obtained with the weigth ratio of sodium hydroxide to Stellite being about 2 at the temperature ranges of $750~800^{\circ}C$ for an hour. The cobalt-bearing compound was identified as $Co_2O_3{\dot}H_2O$ by X-ray analysis and D.T.-T.G.a.. The compound was then digested in HCI to form cobalt chloride, and after iron removal by adjusting the pH of the solution, cobaltous or cobaltic hydroxide was precipitated at the pH of about 13 or 4, respectively. The precipitates were reduced by hydrogen in the temperatures of $400~500^{\circ}C$ to fine cobalt powders of high purity with the size of 1.0 to $1.5\mu\textrm{m}$. The recovery of cobalt from Stellite scrap was about 75~86% by weight.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.203-206
• /
• 2003

$Y_2O_2S:Eu$ phosphors with fine particle have been synthesized by citric acid-gel method. In this method, $Na_2S_2O_3$ was added to $Y_2O_3S:Eu$ precursor, then the mixture was fired at $1000^{\circ}C$ for 3h in $S_2$ atmosphere. When the $Y_2O_3S:Eu$ precursor was pre-annealed at $400{\sim}700^{\circ}C$ before the firing of the mixture, the fine particles with a diameter of around 1 ${\mu}m$ were obtained after the firing. The phosphor pre-annealed at $400^{\circ}C$ showed a luminance and CIE color coordinates of 2350 $cd/m^2$ and (0.61, 0.37), respectively, at under excitation of 3 kV and $60{\mu}A/cm^2$.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.15-23
• /
• 1997

The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.39-39
• /
• 2002

In order to improve wear and fatigue resistance of the structural materials, especially cold work roller for 304 stainless steel, an eco-super-finishing and surface hardening treatment using ultrasonic vibration energy was developed and applied to the SKD-ll roller. The eco-super-finishing machine was designed and fabricated by DesignMecha Co, by its own technology. It was observed that the surface roughness, hardness and residual stress were changed from $Ra{\;}={\;}O.25\mu\textrm{m}$, Hv=710 and ${\sigma}$={\;}+400{\;}MPa{\;}to{\;}Ra{\;}={\;}0.165\mu\textrm{m}$, Hv = 1200 and ${\sigma}=-610$ MPa after 20 KHz micro-cold forging, which means almost equal to the 300 % improvement of life-time.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.400-406
• /
• 2017

The model used in this study was reversed to analyze the cause of excessive damage that occurred inside the rotating system and pipe system of a centrifugal-type seawater pump on a ship. For this purpose, internal flow analysis on a cooling seawater pump was performed using CFD. As a result, the shape and boundary conditions of the target pump were set by reverse engineering, and pump efficiency at a design operating point of $125m^3/h$ was calculated as 85.3 % with a head of 32.0 m. The maximum efficiency point of the target pump was estimated to be 86.2 % at $150m^3/h$, but this differed from the actual operating point. At $112.5m^3/h$, which was the lowest flow point, flow was unstable due to the characteristics of the low flow point and analysis convergence was not good. The purpose of this study was to clarify the cause of ongoing cavitation in seawater pumps and piping systems in operation. Future research will be needed to clarify causes for pipe systems in the future by performing calculations for the total piping system of an inlet and outlet, in addition to measuring the flow rate of each branch pipe.